TITLE

The Application of Artificial Neural Networks to Weld-Induced Deformation in Ship Plate

AUTHOR(S)
Lightfoot, M.P.; Bruce, G.J.; McPherson, N.A.; Woods, K.
PUB. DATE
February 2005
SOURCE
Welding Journal;Feb2005, Vol. 84 Issue 2, p23s
SOURCE TYPE
Trade Publication
DOC. TYPE
Article
ABSTRACT
Discusses the development of an artificial neural network model to be used in a study of factors affecting the distortion of 6- to 8-millimeter-thick D and DH 36 grade steel plate. Deformation induced by welding in shipyards; Neural network models that were considered for selection; Sensitivity of outputs; Steel grade; Cutting process; Association between carbon equivalent and distortion.
ACCESSION #
16048083

 

Related Articles

  • Technical Parameter Analysis of High-Frequency Induction Heating Applied to Steel Plate Bending. Xue-Biao Zhang; Yu-Jun Liu; Yu-Long Yang; Zhuo-Shang Ji; Yan-Ping Deng // Journal of Ship Production & Design;Aug2011, Vol. 27 Issue 3, p99 

    This paper describes the study of hull plate forming by high-frequency induction heating. A finite element model of static large-scale heating is performed and verified by experiments. It can be proposed to be a powerful alternative tool to the actual induction heating process. Parameters...

  • Subsurface deformation and the role of surface texture--A study with Cu pins and steel plates. Menezes, Pradeep L.; Kailas, Satish V. // Sadhana;Jun2008, Vol. 33 Issue 3, p191 

    The extent of subsurface deformation belowtheworn surface influences friction and transfer layer formation during sliding. Thus, in this study, the extent of plastic deformation and strain localization events that occur at various depths beneath the worn surface in the subsurface zones of Cu...

  • Multi-wire SAW of 640 MPa Arctic shipbuilding steel plates. Layus, P.; Kah, P.; Martikainen, J.; Gezha, V.; Bishokov, R. // International Journal of Advanced Manufacturing Technology;Nov2014, Vol. 75 Issue 5-8, p771 

    Extensive industrial use of thick high-strength steel plates in Arctic shipbuilding calls for submerged arc welding (SAW) processes with higher deposition rates. One of the most effective ways of increasing the deposition rate is to increase the number of welding wires. Although SAW processes...

  • The Optimisation of Laser Welding and MIG/MAG -- Laser Hybrid Welding of Thick Steel Sheets. Coutouly, J. F.; Deprez, P.; Demonchaux, J.; Koruk, A. I. // Lasers in Engineering (Old City Publishing);2006, Vol. 16 Issue 5/6, p399 

    This article is about the study of combination between arc and laser welding to improve the quality of welding thick steels sheets. In the first part, the general principles of combining such welding techniques and the main interests of the various authors are discussed. In the second part,...

  • Grade E550 Heavy Steel Plate by TMCP for Offshore Energy Exploration. Weihua Sun; Zhichao Bi // Advanced Materials Research;2014, Vol. 936, p1146 

    This paper introduces the study and production on steel plate of Grade E550 in 60mm thick by Thermo-mechanical processing (TMCP) and tempering for offshore infrastructure purpose. The steel plate obtained high strength and good toughness in both the base materials and the weld joints....

  • Plate Beveling.  // Welding Journal;Mar2005, Vol. 84 Issue 3, p52 

    Presents instructions on the beveling of plate edges in preparation for welding. Single-torch beveling, where the amount and type of torch pre-heat is a dominant factor; Best results obtained when using high oxygen-to-fuel ratios and by positioning the tip very close to the workpiece; Two...

  • Application Research about Vertical Welding Technology of Thick Steel Plate. Fenglan Wang; Li Quangao // International Journal of Advancements in Computing Technology;Apr2013, Vol. 5 Issue 8, p714 

    High quality and efficient welding of thick plate is current urgent practical technology in the welding field. In this paper, using double wire for electro-gas welding method to solve the 100 mm thick steel plate vertical welding experiment has been put forward pointing at the technical problems...

  • Strength and deformability of corroded steel plates under quasi-static tensile load. Ahmmad, Md.; Sumi, Y. // Journal of Marine Science & Technology;Mar2010, Vol. 15 Issue 1, p1 

    The objective of this study was to estimate the strength and deformability of corroded steel plates under quasi-static uniaxial tension. In order to accurately simulate this problem, we first estimated the true stress-strain relationship of a flat steel plate by introducing a vision sensor...

  • ANALYSIS OF THE MICROSTRUCTURE EVOLUTION DURING THERMO-MECHANICAL TREATMENT OF THE STEEL PLATES IN GRADE X80-X100. KNAPINSKI, M.; DYJA, H.; KAWALEK, A.; FRACZEK, T.; LABER, K. // Metalurgija;2013, Vol. 52 Issue 2, p239 

    In the work the results of the physical modeling of plate rolling process of HSLA steel were presented. The simulations were carried out using the Gleeble 3800 device and the anvils set for plane strain compression study. The aim of the simulation were a determination of a influence of changes...

Share

Read the Article

Courtesy of MICHIGAN ELIBRARY

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics