TITLE

Midinfrared luminescence imaging and its application to the optimization of light-emitting diodes

AUTHOR(S)
Weik, F.; Tomm, J.W.; Glatthaar, R.; Vetter, U.; Szewczy, D.; Nurnus, J.; Lambrecht, A.; Mechold, L.; Spellenberg, B.; Bassler, M.; Behringer, M.; Luft, J.
PUB. DATE
January 2005
SOURCE
Applied Physics Letters;1/24/2005, Vol. 86 Issue 4, p041106
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Midinfrared luminescence imaging spectroscopy is used for evaluating surface structures etched into narrow-gap PbSe films. These structures provide a luminescence enhancement by a factor of 6. On the basis of such structures an optically pumped luminescence device is realized. A maximum cw output power of 0.5 mW and a slope efficiency of 0.2 mW/A are obtained at 25 °C. The power efficiency amounts to 2.3×10-2%. The emission wavelength is 4.2 μm, with a half width of 0.8 μm (50 meV). Such devices are promising light sources for a new generation of gas detection systems.
ACCESSION #
15925579

 

Related Articles

  • Application of strontium silicate yellow phosphor for white light-emitting diodes. Joung Kyu Park; Chang Hae Kim; Seung Hyok Park, D.; Hee Dong Park; Se Young Choi, D. // Applied Physics Letters;3/8/2004, Vol. 84 Issue 10, p1647 

    In order to develop a yellow phosphor that emits efficiently under the 450–470 nm excitation range, we have synthesized a Eu[sup 2+]-activated Sr[sub 3]SiO[sub 5] yellow phosphor and attempted to develop white light-emitting diodes (LEDs) by combining them with a InGaN blue LED chip (460...

  • Synthesis and photoluminescence characteristics of color-tunable BaY2ZnO5:Eu3+ phosphors. Liang, Chih-Hao; Chang, Yee-Cheng; Chang, Yee-Shin // Applied Physics Letters;11/24/2008, Vol. 93 Issue 21, p211902 

    Color-tunable phosphors of BaY2-xEuxZnO5 (x=0.001–0.9) were synthesized using a vibrating milled solid state reaction. The results indicate that the emission spectra of BaY2-xEuxZnO5 samples excited at 395 nm exhibit a series of shaped peaks assigned to the 5D0→7FJ (J=0,1,2,3,4)...

  • Ba5SiO4Cl6:Eu2+: An intense blue emission phosphor under vacuum ultraviolet and near-ultraviolet excitation. Qinghua Zeng; Tanno, Hiroaki; Egoshi, Kiichirou; Tanamachi, Nobutsugu; Shuxiu Zhang // Applied Physics Letters;1/30/2006, Vol. 88 Issue 5, p051906 

    An intense blue emission of Eu2+-doped Ba5SiO4Cl6 under vacuum ultraviolet and near-ultraviolet excitation was observed. The material exhibits an emission peak at 440 nm with relative intensity 50% under 147 nm, 90% under 254 nm, 120% under 366 nm, and 220% under 405 nm excitation as compared...

  • Analysis of the Local Structure around Eu and Mn Ions in Alkaline-Earth Silicate Phosphors for White Light Illumination. Okamoto, Kaoru; Yoshino, Masahiko; Shigeiwa, Motoyuki; Mikami, Masayoshi; Akai, Toshio; Kijima, Naoto; Honma, Tetsuo; Nomura, Masaharu // AIP Conference Proceedings;2007, Vol. 882 Issue 1, p520 

    M2SiO4-based phosphors (M: alkaline-earth metal) that emit red to blue light are expected to offer high color rendering to white light-emitting diodes (LEDs) in combination with blue or near-UV excitation sources. It is very important for the complete control of the emission color to understand...

  • Fabrication and Characterization of New Hybrid Organic Light Emitting Diode (OLED): Europium-picrate-triethylene oxide Complex. Sarjidan, M. A. Mohd; Abu Zakaria, N. Z. A.; Abd. Majid, W. H.; Kusrini, Eny; Saleh, M. I. // AIP Conference Proceedings;7/7/2009, Vol. 1150 Issue 1, p287 

    Thin-film light emitting devices based on organic materials have attracted vast interest in applications such as light emitting diode (LED) and flat-panel display. The organic material can be attached with inorganic material to enhance the performance of the light emitting device. A hybrid OLED...

  • Luminescence conversion of blue light emitting diodes. Schlotter, P.; Schmidt, R.; Schneider, J. // Applied Physics A: Materials Science & Processing;1997, Vol. 64 Issue 4, p417 

    Using blue-emitting GaN/6HSiC chips as primary light sources, we have fabricated green, yellow, red and white emitting LEDs. The generation of mixed colors, as turquoise and magenta is also demonstrated. The underlying physical principle is that of luminescence down-conversion (Stokes shift), as...

  • Optical, Structural and Electrical Study of Organic Light Emitting Diode (OLED)Based on MEH/PPV:C60 Composite. Sarjidan, M. A. Mohd; Madzalan, M. Z.; Majid, W. H. Abd // AIP Conference Proceedings;7/7/2010, Vol. 1250 Issue 1, p165 

    The influence of C60 on absorption, photoluminescence (PL) and luminescence properties of a single layer MEH/PPV:C60 organic light emitting diode has been investigated. The MEH/PPV molecules were mixed with 5 wt%, 20 wt% and 50 wt% of C60 and stirred in toluene. The emissive layer of OLED was...

  • Vision + Automation PRODUCTS.  // Vision Systems Design;Nov2005, Vol. 10 Issue 11, p103 

    The article presents information on computer vision equipment. It includes the IR928+ camera system from Armstrong Optical, In-Sight 5400S stainless-steel vision sensor from Cognex and All Color Ultrabright light emitting diodes light source from PerkinElmer Optoelectronics.

  • Optimal radiant flux selection for multi-channel light-emitting diodes for spectrum-tunable lighting. Hu, N-C; Feng, Y-C; Wu, CC; Hsiao, SL // Lighting Research & Technology;Aug2014, Vol. 46 Issue 4, p434 

    To synthesise a spectrum with a given radiant flux by multi-channel light-emitting diodes, different light-emitting diodes should have different radiant fluxes to maximise the light-emitting diode flux utilisation rate defined by the radiant flux of the light-emitting diode’s contribution...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics