TITLE

Smart camera inspects labels at high speed

PUB. DATE
January 2005
SOURCE
Vision Systems Design;Jan2005, Vol. 10 Issue 1, p16
SOURCE TYPE
Periodical
DOC. TYPE
Article
ABSTRACT
Focuses on the smart camera from Analogic Computers installed by Jakob Müller GmbH in one of its label-cutting machine to identify faults and trigger the system to reject faulty labels on its fabric items. Remarks from Robert Fakete, sales and marketing manager with Analogic, on the obstacles needed to be overcome in the design of a machine-vision system; Ways used in the detection of defects on labels; Actions taken by Analogic to develop the image-processing algorithms.
ACCESSION #
15716972

 

Related Articles

  • A Camera Self-calibration Method using a Regular Prismoid. Yue Zhao; Limin Xu // Journal of Applied Sciences;2/15/2013, Vol. 13 Issue 4, p580 

    Camera calibration is an important part of computer vision. The theory is based on the formation of orthogonal vanishing point under perspective projection and linear calibration for a camera. A novel camera self-calibration method based on orthogonal vanishing point is presented, of which the...

  • Research on Surface Defect Detection Technique of Rolling Element Based on Computer Vision. Ren Chuan; Xiu Xiaoyu; Zhou Guohui // Advanced Materials Research;2014, Vol. 1006-1007, p773 

    This paper proposed a new method of surface defect detection of rolling element based on computer vision, which adopted CCD digital camera as image sensor, and used digital image processing techniques to defect the surface defects of rolling element. The main steps include collect image, use an...

  • Combined Static and Dynamic Platform Calibration for an Aerial Multi-Camera System. Hong-Xia Cui; Jia-Qi Liu; Guo-Zhong Su // KSII Transactions on Internet & Information Systems;Jun2016, Vol. 10 Issue 6, p2689 

    Multi-camera systems which integrate two or more low-cost digital cameras are adopted to reach higher ground coverage and improve the base-height ratio in low altitude remote sensing. To guarantee accurate multi-camera integration, the geometric relationship among cameras must be determined...

  • Double Aperture Camera for High Resolution Measurement. Bagaria, Venkatesh; Nagesh, A. S.; Varun, A. V. // World Academy of Science, Engineering & Technology;Nov2009, Issue 35, p423 

    In the domain of machine vision, the measurement of length is done using cameras where the accuracy is directly proportional to the resolution of the camera and inversely to the size of the object. Since most of the pixels are wasted imaging the entire body as opposed to just imaging the edges...

  • Method to Detect and Track Moving Object in Non-static PTZ Camera. Kadim, Zulaikha; Daud, Marizuana Md.; Radzi, Syaimaa Solehah M.; Samudin, Norshuhada; Hon Hock Woon // International MultiConference of Engineers & Computer Scientists;2013, Vol. 1, p1 

    This paper relates to a method for detecting moving objects and track them while the PTZ camera is moving. To ensure that the acquired images are free from blur effect, we have proposed a method to estimate the blur level of the image. For the moving object detection part, we have combined the...

  • An Improved Method for Wild-angle Image Correction. Jiang Kun; Zhang Hua; Zhou Wenhui; Yao Weizhong // Advanced Materials Research;2014, Vol. 998-999, p818 

    Images taken by wide-angle cameras tend to have severe distortions which pull points towards the optical center. Matlab calibration toolbox is widely used in computer vision for its simplicity and strong interactivity; however it cannot accurately extract corners from wide-angle image, and be...

  • Fast Obstacle Distance Estimation using Laser Line Imaging Technique for Smart Wheelchair. Utaminingrum, Fitri; Fitriyah, Hurriyatul; Wihandika, Randy Cahya; Fauzi, M. Ali; Syauqy, Dahnial; Maulana, Rizal // International Journal of Electrical & Computer Engineering (2088;Aug2016, Vol. 6 Issue 4, p1602 

    This paper presents an approach of obstacle distance estimation for smart wheelchair. A smart wheelchair was equipped with a camera and a laser line. The camera was used to capture an image from the environment in order to sense the pathway condition. The laser line was used in combination with...

  • WHAT'S NEW IN MACHINE VISION.  // Engineer (00137758);4/20/2009, Vol. 294 Issue 7770, p32 

    The article offers news briefs related to machine vision in Great Britain. Machine Vision Technology has presented its camera inspection system that adds quality controls to tablet and capsule counting systems. Specialized Imaging has released the SIM-D which is an ultra-fast framing camera...

  • Non-Contact Gaze Tracking with Head Movement Adaptation based on Single Camera. Ying Huang; Zhiliang Wang; An Ping // World Academy of Science, Engineering & Technology;Nov2009, Issue 35, p470 

    With advances in computer vision, non-contact gaze tracking systems are heading towards being much easier to operate and more comfortable for use, the technique proposed in this paper is specially designed for achieving these goals. For the convenience in operation, the proposal aims at the...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics