TITLE

High permittivity Li and Al doped NiO ceramics

AUTHOR(S)
Yuanhua Lin; Jianfei Wang; Lei Jiang; Yu Chen; Ce-Wen Nan
PUB. DATE
December 2004
SOURCE
Applied Physics Letters;12/6/2004, Vol. 85 Issue 23, p5664
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
High-permittivity dielectric NiO-based ceramics co-doped with Li and Al (LANO) have been prepared by a traditional solid-state synthesis. Analyses of the ceramic microstructure and composition indicate that Al ions are distributed in grain boundaries, and that uniform boundaries indexed as NiAl2O4 surround the grains. The concentration of Al has a remarkable effect on the dielectric properties of the LANO ceramics. The dielectric constant remains almost constant (∼104–105) at low frequency and has a steplike decrease toward higher frequencies. The high-dielectric-constant response of the LANO ceramics is mainly enhanced by Maxwell–Wagner polarization.
ACCESSION #
15305382

 

Related Articles

  • Microstructural Development in Al-Ni Alloys Directionally Solidified under Unsteady-State Conditions. Canté, Manuel V.; Spinelli, José E.; Ferreira, Ivaldo L.; Cheung, Noé; Garcia, Amauri // Metallurgical & Materials Transactions. Part A;Jul2008, Vol. 39 Issue 7, p1712 

    Three Al-Ni hypoeutectic alloys were directionally solidified under upward unsteady-state heat-flow conditions. Primary ( λ 1) and secondary ( λ 2) dendrite arm spacings were measured along the castings for all alloys and correlated with transient solidification thermal variables. A...

  • Influence of Growth Rate on Microstructural Length Scales in Directionally Solidified NiAl-Mo Hypo-Eutectic Alloy. Zhang, Jianfei; Ma, Xuewei; Ren, Huiping; Chen, Lin; Jin, Zili; Li, Zhenliang; Shen, Jun // JOM: The Journal of The Minerals, Metals & Materials Society (TM;Jan2016, Vol. 68 Issue 1, p178 

    In this article, the Ni-46.1Al-7.8Mo (at.%) alloy was directionally solidified at different growth rates ranging from 15 μm/s to 1000 μm/s under a constant temperature gradient (334 K/cm). The dependence of microstructural length scales on the growth rate was investigated. The results show...

  • A study aimed at determining and understanding the fracture behaviour of an Al�Li�Cu�Mg�Zr alloy 8090. Bregianos, A. C.; Crosky, A. G.; Munroe, P. R.; Hellier, A. K. // International Journal of Fracture;Feb2010, Vol. 161 Issue 2, p141 

    The S-L fracture toughness of aluminium�lithium based alloys is generally poor and this has limited their applicability, particularly in aerospace where good damage tolerance is required. The low S-L toughness has been attributed variously to grain boundary precipitation, planar slip and...

  • Cyclic Deformation Behaviors of $$ [\bar{5}79] $$-Oriented Al Single Crystals. Peng Li; Shouxin Li; Zhongguang Wang; Zhefeng Zhang // Metallurgical & Materials Transactions. Part A;Oct2010, Vol. 41 Issue 10, p2532 

    During the cyclic deformation of $$ [\bar{5}79] $$, Al single crystals with a high stacking fault energy produced slip bands that were characterized by wavy slip. Its cyclic stress response curve demonstrated that the specimen experienced hardening–softening–secondary hardening in...

  • Tip-induced domain growth on the non-polar cuts of lithium niobate single-crystals. Alikin, D. O.; Ievlev, A. V.; Turygin, A. P.; Lobov, A. I.; Kalinin, S. V.; Shur, V. Ya. // Applied Physics Letters;5/4/2015, Vol. 106 Issue 18, p1 

    Currently, ferroelectric materials with designed domain structures are considered as a perspective material for new generation of photonic, data storage, and data processing devices. Application of external electric field is the most convenient way of the domain structure formation. Lots of...

  • Swift Heavy Ion Induced Modification in BaxSr1-xTiO3 Ceramics. Bajpai, Parmendra Kumar; Kumar, Ravi // AIP Conference Proceedings;3/15/2009, Vol. 1099 Issue 1, p389 

    Swift Heavy Ion (SHI) irradiated BaxSr1-xTiO3 compositions (x = 0.75, 0.85 and 0.90) are studied using structural, micro-structural, ferroelectric and dielectric techniques. The properties are compared with unirradiated bulk ceramics.

  • Dielectric properties of BaBi2Nb2O9 ceramics. Adamczyk, M.; Ujma, Z.; Pawełczyk, M. // Journal of Materials Science;Aug2006, Vol. 41 Issue 16, p5317 

    The crystal structure and dielectric properties as a function of temperature for Ba-based with Bi-layered structure BaBi2Nb2O9 (BBN) ceramics were investigated. The obtained results confirmed the relaxor ferroelectric behavior of the studied ceramics, including a strong frequency dispersion of...

  • Electromechanical characterization of 0.55Pb(Ni1/3Nb2/3)O3–0.45Pb(Zr0.3Ti0.7)O3 fibers with Pt core. Sebald, Gael; Benayad, Abdelmjid; Qiu, Jinhao; Guiffard, Benoit; Guyomar, Daniel // Journal of Applied Physics;9/1/2006, Vol. 100 Issue 5, p054106 

    Piezoelectric fibers of composition 0.55Pb(Ni1/3Nb2/3)O3–0.45Pb(Zr0.3Ti0.7)O3 were fabricated by extrusion of Pb(Nb,Ni)O3–Pb(Zr,Ti)O3 (PNN–PZT) powder around a platinum wire. Their properties are compared with the same bulk material properties. Fiber’s ceramic...

  • Influence of Li additions on the microstructure and corrosion response of 2XXX series Aluminium Alloys. Carrick, D. M.; Hogg, S. C.; Wilcox, G. D. // Materials Science Forum;2014, Vol. 794-796, p193 

    This paper discusses two Al-Cu alloys for aerospace applications, one of which has an addition of between 1.6 and 2.0 wt.% of Li. The alloys are AA2024-T3 (Al-Cu) and AA2099-T8E77 (Al-Cu-Li). Microstructural analysis via Field Emission Gun Transmission Electron Microscope (FEGTEM) and Field...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics