Coming up to scratch

February 1999
Cabinet Maker;02/05/99, Issue 5124, p18
Trade Publication
Reports on the testing of paper foils in England. Assessment of products by finish performance adhesion at elevated temperatures, environmental response in dry and damp conditions and workmanship; Liquid attack tests using some 13 common household products including tea, coffee and ammonia solution.


Related Articles

  • Paper magic. Hollyer, Tony // Cabinet Maker;02/05/99, Issue 5124, p16 

    Examines the growth of British paper foil lamination maker Decorative Panels. Offer of paper foil for furniture making; Growth rate; Equipment used; Manufacture of paper foil from the pulp of European softwood; paper foils' capability of replicating natural wood veneers without loss of...

  • Japell gets Autobond.  // Printing World;10/23/2003, Vol. 284 Issue 3, p38 

    Reports that the laminating systems made by British firm Autobond have been purchased by European trade finishing firms Japell and Pelliculges Toulousains.

  • Impact Strength of Laminated Floor Panel from Kenaf(Hibiscus cannabinus) High Density Fibreboard. Ahmad, Mansur; Nurul Nadia Mohd Khairuddin; Nurul Atiqah Mohd Ayob // Applied Mechanics & Materials;2015, Vol. 799-800, p201 

    This study provides a better understanding of the effect of density and thickness on impact strength of laminated floor panel from Kenaf high density fibreboard (KHDF). The objective of this study was therefore to determine the role of density and thickness on the impact strength of laminated...

  • Foreword. KANWAL, Nayan Deep S. // Pertanika Journal of Science & Technology;Jul2015, Vol. 23 Issue 2, p1 

    No abstract available.

  • METAL TABAKALI KOMPOZÄ°TLERÄ°N DÜŞÜK HIZLI ENÄ°NE DARBEYE KARÅžI DAVRANIÅžLARININ Ä°NCELENMESÄ°. KARA, Memduh; UYANER, Mesut // Selcuk University Journal of Engineering, Science & Technology /;2016, Vol. 4 Issue 4, p256 

    In this study, transverse impact behavior of laminated metal composites was investigated. Four different configuration namely (Al)3, (St)3, (Al+St+Al) and (St+Al+St), were made by using St37 DKP and 1050-H14 Al alloy which all in 1 mm thick. Three layered composites were tested under various...

  • Computer Simulation of Fracture Process in Compressive Failure of Cross-Ply Laminate of Composite Materials. Nadabe, Takeaki; Takeda, Nobuo // Applied Mechanics & Materials;2014, Issue 660, p549 

    This study investigates the computer simulation of fracture process in compressive failure of cross-ply laminate of composite materials. The purpose of this study is to establish the numerical analysis method to understand the fracture mechanism and predict the mechanical response of composite...

  • TESTING TECH.  // High Performance Composites;Nov2009, Vol. 17 Issue 6, p9 

    The article discusses the direct method in measuring the through-thickness tensile strength of solid laminate. The two testing methods are the new standard, ASTM D 7291-07, "Through-Thickness 'Flatwise' Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite...

  • Residual Stress Analysis of Orthotropic Materials by the Through-hole Drilling Method. P. Pagliaro; B. Zuccarello // Experimental Mechanics;Apr2007, Vol. 47 Issue 2, p217 

    Abstract??The present study deals with the development and the application of the through-hole drilling method for the residual stress analysis in orthotropic materials. Through a systematic theoretical study of the stress field present on orthotropic plates with a circular hole, the...

  • MODELING OF ULTRASONIC TESTING OF WOVEN FABRIC LAMINATES: A MICROSTRUCTURE APPROACH. Hegemann, J.; Peiffer, A.; Van Den Broucke, B.; Baier, H. // AIP Conference Proceedings;3/3/2009, Vol. 1096 Issue 1, p1077 

    New complex materials constitute new challenges for the well established nondestructive ultrasonic testing (UT) methods. In aeronautic industry Carbon Fiber Reinforced Plastics (CFRP) with a high level of inner inhomogeneity are used. New construction methods of these materials lead to...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics