TITLE

Improved device efficiency and color purity: Spectral redshift and line narrowing for poly [2-methoxy,5-(2-ethylhexyloxy)-1,4-phenylenevinylene] via blending with phenyl-substituted poly [p-phenylene vinylene] derivatives

AUTHOR(S)
Yong Zhang; Junbiao Peng; Yueqi Mo; Yong Cao
PUB. DATE
November 2004
SOURCE
Applied Physics Letters;11/29/2004, Vol. 85 Issue 22, p5170
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Highly efficient light-emitting diodes with redshifted narrow emission were realized based on blends of poly [2-methoxy,5-(2-ethylhexyloxy)-1,4-phenylene vinylene] (MEH-PPV) and phenyl-substituted poly [p-phenylene vinylene] derivative (P-PPV). EL emissions of blend device were redshifted about 18 nm from the peak emission of 582 nm for neat MEH-PPV device to around 600 nm for devices from the blend film. The full width at half maximum of MEH-PPV emission from blend film was reduced from 91 to 36 nm. The external quantum and luminous efficiencies of devices from blend films (MEH-PPV:P-PPV=20:80) reached 5.27% and 4.71 cd/A, respectively. The effective energy transfer and solid-state dilution effect of MEH-PPV in P-PPV host were thought of as the origin of the performance enhancement.
ACCESSION #
15244182

 

Related Articles

  • OLEDs Development Faces Tech and Financial Hurdles. Milmo, Sean // Chemical Market Reporter;2/2/2004, Vol. 265 Issue 5, p4 

    Reports on the pressure faced by European developers of conductive polymer technologies for flat-panel electronic displays to reduce the scope of their activities. Identification of the hurdles faced by these companies; Views of executives regarding the potential market for customized displays...

  • Multilayer structured polymer light emitting diodes with cross-linked polymer matrices. Zhang-Lin Zhou; Xia Sheng; Nauka, K.; Lihua Zhao; Gibson, Gary; Lam, Sity; Chung Ching Yang; Brug, James; Elder, Rich // Applied Physics Letters;1/4/2010, Vol. 96 Issue 1, p013504 

    Currently, there is great interest in manufacturing multilayer polymer light emitting diode (PLED) structures via low-cost solution-based spin-casting or printing methods. The difficulty with this approach is that solvent from freshly deposited films often dissolves the underlying layers. This...

  • LIGHT DEVICES WITH BLUE LIGHT EMITTING DIODES AND PHOSPHOR ON THE PROTECTION GLASS. Mitrofanov, Alexander V.; Orlovsky, Valerie N.; Kholodilov, Valerie I. // Light & Engineering;2009, Vol. 17 Issue 1, p74 

    At present, light devices (LD) with white light emitting diodes (LED) are not yet widely used in general and local room illumination. The main causes of this are high cost of LEDs, which according to different evaluations, makes 60-70 % of the cost of all components and materials used in the...

  • Single cell flashes white LED. Smith, Anthony; Travis, Bill // EDN;12/11/2003, Vol. 48 Issue 27, p84 

    Describes the ability of a single cell to flash white light-emitting diode (LED). Limitation of many portable appliances and other products that must operate from a single cell to work at very low voltages; Complications of the ability to flash the LED with a supply voltage as low as 1 volt;...

  • Studying the Stability of Nanosecond Light-Pulse Sources Based on Blue GaN and InGaN Light-Emitting Diodes. Vyatchin, E.E.; Lubsandorzhiev, B.K. // Instruments & Experimental Techniques;Jul/Aug2004, Vol. 47 Issue 4, p493 

    The results of studying the stability of the parameters of nanosecond light-pulse sources based on bright blue light-emitting diodes are presented. These diodes were developed by the Nichia and Kingbright companies for calibration measurements in the HT-200 deep-water neutrino telescope, the...

  • Cool Lights Are Hot. Bergh, Arpad // World & I;Aug2003, Vol. 18 Issue 8, p150 

    Reveals that the light-emitting diodes (LED) are displacing incandescent bulbs and opening the way for ubiquitous lighting. Information on solid-state lighting; Light-system options offered by LED that challenge established views about the nature of light sources; Major milestone of LED...

  • Real-world systems demand application-specific designs. Schie, David // Laser Focus World;May2004, Vol. 40 Issue 5, p102 

    Delves into high-brightness light-emitting diodes (LEDs). Discussion of the categories of LEDs; Issue of the lifetime of LEDs; Analysis of the filtering and crest factor of LEDs.

  • Rainbow LED indicates voltage with color. Prutchi, David // EDN;12/7/2004, Vol. 49 Issue 25, p106 

    This article looks at a rainbow light emitting diode (LED) that indicates voltage with color. Meters that indicate analog levels via a moving-pointer meter, a numeric display, or a column of LED typically occupy considerable panel area and require more than a casual glance to read. An indicator...

  • III-nitride photonic-crystal light-emitting diodes with high extraction efficiency. Wierer Jr., Jonathan J.; David, Aurelien; Megens, Mischa M. // Nature Photonics;Mar2009, Vol. 3 Issue 3, p163 

    Light-emitting diodes are becoming an increasingly attractive alternative to conventional light sources due to their small size, high efficiency and long lifetime. Ongoing research is dedicated to improving their performance through the use of more efficient light-generating and light-extracting...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics