TITLE

An overview of qualimetric strategies for optimisation and calibration in pharmaceutical analysis using flow injection techniques

AUTHOR(S)
Bosque-Sendra, J. M.; Gámiz-Gracia, L.; García-Campaña, A. M.
PUB. DATE
November 2003
SOURCE
Analytical & Bioanalytical Chemistry;Nov2003, Vol. 377 Issue 5, p863
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Flow Injection analysis represents an attractive tool because of its great advantages, such as versatility, speed, high sampling rate and wide applicability in the field of pharmaceutical analysis. However, due to the inherent characteristics of the technique, the choice of the best set of operational and chemical conditions is complicated and the conventional univariate optimisation method present some limitations, mainly due to fact that the interdependence of variables is not considered. In relation to the calibration process, because of the transient character of the signals obtained using FIA manifolds coupled with different detection techniques, different strategies can be used in calibration to solve some problems related to the nature of the signal thereby improving the performance characteristics of the method. This paper offers an overview of different methodologies used in optimisation based on the use of statistically designed experiments and some strategies developed for calibration applied to the analysis of pharmaceuticals.
ACCESSION #
15124785

 

Related Articles

  • Flow Injection Determination of Lomefloxacin Based on Photochemically Sensitized Chemiluminescence. Chunyan Sun; Ning Lian; Huichun Zhao; Lin Yi; Linpei Jin // Microchimica Acta;Sep2004, Vol. 148 Issue 1/2, p65 

    A photochemical chemiluminescence (CL) method for the determination of lomefloxacin (LFX) is proposed. LFX undergoes a photochemical reaction when irradiated with ultraviolet light, and a complex is formed when the photoproduct reacts with terbium(III), which can greatly enhance the CL of the...

  • Tagging LOAD CELLS. Sepe Jr., Raymond // Machine Design;8/10/2006, Vol. 78 Issue 15, p63 

    The article discusses the basic design of sensors, with an emphasis on automatic identification of load cells. The utilization of automatic identification may lessen the incidence of human errors in hardware development. Through the Transducer Electronic Datasheet (TEDS), calibration depends on...

  • Calibration: What Is It? Payne, Graeme C. // Quality Progress;May2005, Vol. 38 Issue 5, p72 

    The article discusses the meaning of calibration. Broadly speaking, calibration is the process of determining the relationship between the readings obtained by a measuring instrument or system and the applicable units of some defined system of measurement. Calibration quantifies the relationship...

  • Thermal effects in the 'real-world' Clark, Richard // T & P: Tooling & Production;Oct2004, Vol. 70 Issue 10, p44 

    The article reports on examining thermal effects in setting up an in-house measurement control system. Unfortunately, for most who are tasked to set up an in-house measurement control system, the most accessible people to ask about thermal effects are our friends at the outside source...

  • Get Calibration Scheduled Right. Cox, Hill // Quality;Jan2005, Vol. 44 Issue 1, p28 

    This article presents information on calibration in manufacturing firms. Once a manufacturer decides to bring calibration in-house, there are some things that can be done to avoid problems. One can begin by getting the managers of the various departments together, including the shop manager, the...

  • Development of an FI-ICP Method for On-Line Preconcentration and Determination of Platinum. Martos, N. Ramos; Rudner, P. Ca�ada; de Torres, A. Garc�a; Pav�n, J. M. Cano // Microchimica Acta;Sep2004, Vol. 148 Issue 1/2, p35 

    This paper presents a new simple and rapid procedure for the preconcentration and determination of platinum. It is based on the adsorption of the metal ion and preconcentration on a micro-column (3?cm�3?mm) placed in the injection valve of a flow injection (FI) manifold and packed with...

  • What Flow Injection has to Offer in the Environmental Analytical Field. Mir�, Manuel; Frenzel, Wolfgang // Microchimica Acta;Sep2004, Vol. 148 Issue 1/2, p1 

    Flow injection analysis (FIA) is presented as a powerful tool to meet the analytical requirements of environmental and agricultural assays in terms of automation, monitoring, microsampling, speciation and sample processing. Its potentials and limitations are critically discussed and demonstrated...

  • Did over-reliance on commercial catch rate data precipitate the collapse of northern cod? Shelton, Peter A. // ICES Journal of Marine Science / Journal du Conseil;Sep2005, Vol. 62 Issue 6, p1139 

    It has been suggested that a number of “lessons” can be learned from the collapse of the northern cod stock off Newfoundland and Labrador. However, not all purported lessons have been validated with available data. One lesson is thought to be that over-reliance on commercial catch...

  • Development of a Sequential Injection Analysis Device for the Determination of Total Polyphenol Index in Wine. Moreno, Cristina L�pez; Rudner, Pedro Ca�ada; Garc�a, Jos� Manuel Cano; Pav�n, Jos� Manuel Cano // Microchimica Acta;Sep2004, Vol. 148 Issue 1/2, p93 

    A sequential injection analysis method is developed for the determination of the total polyphenol index in wines. The determination is based on the Folin-Ciocalteu reaction, which is monitored spectrophotometrically. Interactions between experimental variables and their optimal levels were...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics