TITLE

Clean-up of triazines in vegetable extracts by molecularly-imprinted solid-phase extraction using a propazine-imprinted polymer

AUTHOR(S)
Cacho, C.; Turiel, E.; Martín-Esteban, A.; Pérez-Conde, C.; Cámara, C.
PUB. DATE
June 2003
SOURCE
Analytical & Bioanalytical Chemistry;Jun2003, Vol. 376 Issue 4, p491
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
An analytical methodology based on a molecularly imprinted solid-phase extraction (MISPE) procedure was developed for the determination of several triazines (atrazine, simazine, desethylatrazine (DEA), desisopropylatrazine (DIA), and propazine) in vegetable samples. A methacrylic acid-based imprinted polymer was prepared by precipitation polymerisation using propazine as template and toluene as porogen. After removal of the template by Soxhlet extraction, the optimum loading, washing, and elution conditions for MISPE of the selected triazines were established. The optimised MISPE procedure was applied to the extraction of the selected triazines in pea, potato, and corn sample extracts and a high degree of clean-up was obtained. However, some remaining interferences, non-specifically and strongly bound to the polymeric matrix, appeared in the chromatogram, preventing quantification of DIA in potatoes and DIA, DEA, and propazine in corn samples. Thus, a new clean-up protocol based on the use of a non-imprinted polymer for removal of these interferences prior to the MISPE step was developed. By following the new two-step MISPE procedure, the matrix compounds were almost completely removed, allowing the determination of all the triazines selected at concentration levels below the established maximum residue limits, making the developed procedure suitable for monitoring these analytes in vegetable samples.
ACCESSION #
15124603

 

Related Articles

  • Molecularly imprinted polymers for solid-phase extraction. Haginaka, Jun // Analytical & Bioanalytical Chemistry;Jun2004, Vol. 379 Issue 3, p332 

    The article focuses on the importance of molecularly imprinted polymers (MIPs) for solid-phase extraction. The use of MIPs in sample concentration, clean up, screening, and isolation by solid-phase extraction with compound-specific or group-specific extractions are highly attractive and...

  • Solid-Phase Microextraction. Hinshaw, John V. // LC-GC Asia Pacific;Nov2012, Vol. 15 Issue 4, p22 

    The article discusses solid-phase microextraction (SPME) using absorptive polymeric coatings. It provides a background of SPME and its principles. It explains the distinction of SPME from solid-phase extraction (SPE) and stir-bar sorptive extraction (SBSE). Details of the steps involved in SPME...

  • Simple and Fast SPE-UPLC-MS-MS Method for an Allergy Tablet Mixture of Acids and Bases. Chambers, Erin; Diehl, Diane; Mazzeo, Jeff // LC-GC Europe;Dec2005 Supplement, Vol. 18, p12 

    The article describes a novel approach to selecting solid-phase extraction methodology based on two protocols and four mixed-mode Oasis sorbents. The components of the tablets used in the study are ibuprofen, pseudoephedrine and chlorpheniramine. The method achieved excellent recoveries for both...

  • Use of solid-phase extraction to enable enhanced detection of acyl homoserine lactones (AHLs) in environmental samples. Schupp, Peter J.; Charlton, Timothy S.; Taylor, Michael W.; Kjelleberg, Staffan; Steinberg, Peter D. // Analytical & Bioanalytical Chemistry;Sep2005, Vol. 383 Issue 1, p132 

    A challenge for understanding the role of bacterial cell–cell signalling in the environment is the detection of those signals, which are often present in low (nmol L−1) concentrations. We describe here a simple purification method, solid-phase extraction (SPE), for increasing the...

  • Advanced Topics in Solid-Phase Extraction: Chemistries. Majors, Ronald E. // LC-GC North America;Jan2007, Vol. 25 Issue 1, p16 

    The article discusses several advances in solid-phase extraction (SPE). SPE has branched out into other areas by employing new formats, new chemistries via novel sorption and partition mechanisms, multidimensional techniques, and miniaturized systems. The approaches used for automation include...

  • A Novel, Mixed-Mode Weak Cation Exchange SPE Sorbent: Oasis® WCX. Ziling Lu; Diehl, Diane M.; Trammell, Brian; Brousmiche, Darryl; Woods, Ermie; O'Gara, John; Iraneta, Pamela C.; Karm, Sue; Walter, Tom; Yuehong Xu; Boissel, Cheryl; Mazzeo, Jeffrey R.; Gu, Weigiang; Beardsley, Maria; Yung-Fong Cheng // LC-GC North America;Jun2004 Supplement, Vol. 22, p57 

    Investigates the Oasis® weak cation exchange solid-phase extraction sorbent to selectively extract three types of bases from rat plasma samples. Sample preparation for strong bases and quarternary amines; Description of the retention mechanism; Improvement of retention for all types of basic...

  • Modern Techniques for the Extraction of Solid Materials -- An Update. Majors, Ronald E. // LC-GC North America;Jul2006, Vol. 24 Issue 7, p648 

    Traditional methods for the sample preparation of insoluble solid materials have represented one of ' the more time consuming and labor intensive efforts in analysis. In this installment of "Sample Prep Perspectives," Ron Majors examines modern sample preparation methods for solids that often...

  • Advanced Topics in Solid-Phase Extraction: Chemistries. Majors, Ronald E. // LC-GC Asia Pacific; 

    Although the majority of solid-phase extraction (SPE) is performed with conventional bonded silica -and polymeric-phases, difficult and complex samples may require more specialized stationary phases. In this instalment of "Sample Preparation Perspectives", columnist Ron Majors discusses advanced...

  • Selective solid-phase extraction of bisphenol A using molecularly imprinted polymers and its application to biological and environmental samples. Jiang-hua Zhang; Ming Jiang; Lijun Zou; Dan Shi; Su-rong Mei; Ye-xiang Zhu; Yun Shi Kang Dai; Bin Lu // Analytical & Bioanalytical Chemistry;Jul2006, Vol. 385 Issue 4, p780 

    Molecularly imprinted polymers (MIPs) were prepared using bisphenol A (BPA) as a template by precipitation polymerization. The polymer that had the highest binding selectivity and ability was used as solid-phase extraction (SPE) sorbents for direct extraction of BPA from different biological and...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics