TITLE

A core—shell structured BaTiO3 precursor preparation, characterization and potential

AUTHOR(S)
Rössel, Michael; Gablenz, Silvio; Müller, Thomas; Röder, Andreas; Abicht, Hans-Peter
PUB. DATE
January 2003
SOURCE
Analytical & Bioanalytical Chemistry;Jan2003, Vol. 375 Issue 2, p310
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
A new procedure for the preparation of a core–shell-structured BaTiO3 precursor (core=TiO2; shell=BaCO3) will be described. The structure of this precursor is characterized by electron microscopy (environmental scanning electron microscopy; energy disperse X-ray spectroscopy), whereas the development of phases during thermal treatment is followed by X-ray powder diffraction.
ACCESSION #
15124484

 

Related Articles

  • Silver–copper electrodeposition from ammonium hydroxide solution: influence of EDTA and HEDTA. de Oliveira, G. M.; Carlos, I. A. // Journal of Applied Electrochemistry;Aug2009, Vol. 39 Issue 8, p1217 

    The influence of EDTA (ethylenediaminetetraacetic acid, disodium salt) or HEDTA (N-(2-hydroxyethyl)ethylenediaminetriacetic acid, trisodium salt) on silver–copper electrodeposition from ammonium hydroxide solution was investigated. Voltammetric studies showed that silver was deposited at...

  • Characterization of non-calcareous "thin" red clay from south-eastern Brazil: applicability in wall tile manufacture. Sousa, S. J. G.; Holanda, J. N. F. // Ceramica;Jan-Mar2012, Vol. 58 Issue 345, p29 

    The article presents a study that determines the characteristics of thin red clay used in manufacturing wall tile. It explores the method of the study that analyzes and observes the grain-size of thin red clay using X-ray diffraction (XRD), X-ray fluorescence (XRF), and scanning electron...

  • Synthesis and structural characterization of the Ca2MnReO6 double perovskite. Corrêa, H. P. S.; Cavalcante, I. P.; Souza, D. O.; Santos, E. Z.; Orlando, M. T. D.; Belich, H.; Silva, F. J.; Medeiro, E. F.; Pires, J. M.; Passamai, J. L.; Martinez, L. G.; Rossi, J. L. // Ceramica;jun2010, Vol. 56 Issue 338, p193 

    The article presents a study on the structural and synthesis characterization of the Ca2MnReO6 double perovskite. The study uses the encapsulated quartz tube method in preparing Ca2MnReO6 double perovskite in polycrystalline form. The scanning electron microscopy and energy dispersive X-ray...

  • The effect of waste loading on the microstructure of glass composite waste forms for the immobilisation of spent clinoptilolite. Juoi, J. M.; Ojovan, M. I. // Glass Technology: European Journal of Glass Science & Technology;Jun2007, Vol. 48 Issue 3, p124 

    Immobilisation of spent clinoptilolite was carried out in a monolithic glass composite wasteform (GCM) produced by pressureless sintering at 750°C for 2 h. Different loadings of simulated spent clinoptilolite (Cs-clino) were studied with glass to Cs-clino volume) ratios ranging from 1:1 to...

  • Advanced X-Ray Laboratory Microbeam Techniques Applied to Metallurgy. Gelfi, Marcello; Bontempi, Elza; Cornacchia, Giovanna; Roberti, Roberto; Depero, Laura E. // Microchimica Acta;Sep2006, Vol. 155 Issue 1/2, p151 

    X-ray experiments with a spatial resolution of lower then 1 µm have been achieved with microfocus sources by means of high brilliance 3rd generation synchrotrons. Recently the availability of high-sensitivity, high-resolution and large area detectors, as for example image plate, has allowed...

  • Experimental investigation and thermodynamic modeling of the ternary Al-Cu-Fe system. Hai-Lin Chen; Yong Du; Honghui Xu; Wei Xiong // Journal of Materials Research;Oct2009, Vol. 24 Issue 10, p13 

    The constitution of the ternary system Al-Cu-Fe in the region above 40 at.% Al at 600 °C is investigated by means of x-ray diffraction, metallography, scanning electron microanalysis with energy dispersive x-ray spectroscopy, and differential thermal analysis. The phase equilibria in the...

  • Effect of Cu addition on microstructure and properties of Mg-10Zn-5Al-0.1Sb high zinc magnesium alloy. You Zhiyong; Zhang Yuhua; Cheng Weili; Zhang Jinshan; Wei Yinghui // China Foundry;Feb2012, Vol. 9 Issue 1, p43 

    To improve the strength, hardness and heat resistance of Mg-Zn based alloys, the effects of Cu addition on the as-cast microstructure and mechanical properties of Mg-10Zn-5Al-0.1Sb high zinc magnesium alloy were investigated by means of Brinell hardness measurement, scanning electron microscopy...

  • Mild hydrothermal synthesis of γ-MnO2 nanostructures and their phase transformation to α-MnO2 nanowires. Yaqoob Khan; Durrani, Shahid Khan; Mehmood, Mazhar; Khan, Muhammad Riaz // Journal of Materials Research;9/14/2011, Vol. 26 Issue 17, p2268 

    Urchin-like γ-MnO2 nanostructures, composed of nanowires with diameters in the range 40-70 nm were prepared through the direct reaction between MnSO4 and KClO3 via a mild hydrothermal route. Reaction time and temperature were found to influence both the phase and morphology of as-prepared...

  • Structure and magnetocaloric properties of the Fe-doped HoTiGe alloy. Provenzano, V.; Baumgold, B.; Shull, R. D.; Shapiro, A. J.; Koyama, K.; Watanabe, K.; Singh, N. K.; Suresh, K. G.; Nigam, A. K.; Malik, S. K. // Journal of Applied Physics;4/15/2006, Vol. 99 Issue 8, p08K906 

    The structure and magnetocaloric properties of the Fe-doped HoTiGe compound were investigated by means of scanning electron microscopy (SEM), energy dispersive spectroscopy, x-ray diffraction, magnetometry, and calorimetry. As with the early studies on the undoped compound, the Fe-containing...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics