TITLE

Corrosion performance of NiAl intermetallic with Mo, Ga and Fe in neutral and alkaline media

AUTHOR(S)
Albiter, A.; Espinosa-medina, M. A.; Casales, M.; Gonzalez-rodriguez, J. G.
PUB. DATE
November 2004
SOURCE
Journal of Applied Electrochemistry;Nov2004, Vol. 34 Issue 11, p1141
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The corrosion resistance of mechanically alloyed NiAl intermetallics with additions of Mo, Ga and Fe, and their combinations, has been studied using potentiodynamic polarization curves and linear polarization resistance tests at room temperature. Solutions included 0.5 m NaCl and 0.5 m NaOH. The Al–42Ni+6Fe and Al–40Ni+6Fe+2Mo alloys exhibited the best corrosion resistance in NaCl whereas the highest corrosion rate was observed on Al–39Ni+6Fe+6Mo alloy, above the NiAl-base alloy. In NaOH, the highest corrosion rate was exhibited by Al–41Ni+6Mo alloy, whereas the best corrosion performance was obtained by alloys with 6Ga, followed by alloys containing 6Fe+2Ga and/or 2Mo+2Ga, and NiAl-base alloy had an intermediate corrosion rate. The alloys with the lowest corrosion rate also had the lowest pitting potential values. So, generally speaking, additions of 6Mo decreased the corrosion resistance of NiAl-base alloys in these environments. The results were supplemented by detailed scanning electronic microscopy studies and chemical microanalysis of the corroded specimens.
ACCESSION #
15123882

 

Related Articles

  • CORROSION-RESISTANT NICKEL ALLOYS PART I. Crook, Paul // Advanced Materials & Processes;Jun2007, Vol. 165 Issue 6, p37 

    The article examines the most used nickel alloys and how each resists certain types of corrosion. Nickel itself is corrosion resistant in its commercially pure form, as well as being easily shaped, suiting it for use in food processing equipment. Nickel-copper alloys resist salt corrosion, and...

  • The Effect of Boronizing on Metallic Alloys for Automotive Applications. Petrova, Roumiana S.; Suwattananont, Naruemon; Samardzic, Veljko // Journal of Materials Engineering & Performance;Jun2008, Vol. 17 Issue 3, p340 

    In this study the wear resistance, corrosion resistance, and oxidation resistance of boronized metallic alloys were investigated. Thermochemical treatment was performed by powder pack boronizing process at temperature 850-950 °C for 4 h. Saw-tooth morphology and smooth interface...

  • CORROSION CONTROL with Ni-Cr-Mo Alloys. Agarwal, D.C. // Advanced Materials & Processes;Aug2000, Vol. 158 Issue 2, p27 

    Focuses on the use of nickel-chromium-molybdenum (Ni-Cr-Mo) alloys in the chemical process and petrochemical industries due to their ability to withstand high-temperatures and aqueous corrosion. Chronology of Ni-Cr-Mo alloys; General applications; Possible innovations in the alloy metallurgy of...

  • Weldability of a Corrosion-Resistant Ni-Cr-Mo-Cu Alloy. Rowe, M.D.; Crook, P.; Hoback, G.L. // Welding Journal;Nov2003, Vol. 82 Issue 11, p313-s 

    Focuses on the use of corrosion-resistant alloys based on the Nickel-Cromium-Molybdenum system in demanding applications in chemical process, pollution control and other industries. Conduction of mechanical testing on weldments; Performance of immersion corrosion tests on all-weld-metal coupons...

  • Effect of molybdenum on SCC of 17-4PH stainless steel under different aging conditions in chloride solutions. Karaminezhaad, M.; Sharafi, S.; Dalili, K. // Journal of Materials Science;Jun2006, Vol. 41 Issue 11, p3329 

    Type 17-4 PH martensitic precipitation-hardenable stainless steel, having a combination of high mechanical properties and good corrosion resistance is widely used in aerospace, chemical, and petrochemical and food industries This alloy has a high resistance to stress corrosion cracking but age...

  • Electrochemical evaluation of the effect of binder additives on iron corrosion. Arroyo, J. Carlos; Saffarian, Hassan M.; Warren, Garry W. // Journal of Applied Physics;5/15/1994, Vol. 75 Issue 10, p5568 

    Presents an electrochemical evaluation of the effect of binder additives on iron corrosion. Methodology; Results of the study; Conclusions.

  • Corrosion and mechanical properties of titanium alloyed with aluminum, iron, and molybdenum. Shapovalov, O.; Shapovalova, O.; Ivchenko, T. // Materials Science;Sep2006, Vol. 42 Issue 5, p615 

    We study the influence of Fe, Al, and Mo on the corrosion and mechanical properties of titanium. It is shown that the corrosion resistance of titanium becomes 3.5 times lower as the concentration of iron increases from 0.1 to 5%. The microalloying of Ti-Al-Fe-Mo alloys with molybdenum inhibits...

  • Phase Transformations and Microstructural Evolution of Mo-Bearing Stainless Steels. Anderson, T. D.; Dupont, J. N.; Perricone, M. J.; Marder, A. R. // Metallurgical & Materials Transactions. Part A;Jan2007, Vol. 38 Issue 1, p86 

    The good corrosion resistance of superaustenitic stainless steel (SASS) alloys has been shown to be a direct consequence of high concentrations of Mo, which can have a significant effect on the microstructural development of welds in these alloys. In this research, the microstructural...

  • Quantification of Fe-base Alloy Degradation after Immersion Test. Florin, SĂNDULACHE; Sergiu, STANCIU; Ramona, CIMPOESU; Mihaela, RATOI; Nicanor, CIMPOESU // Applied Mechanics & Materials;2015, Vol. 809/810, p566 

    A new FeMnSi metallic alloy is proposed as biodegradable material with applications in medical field. The corrosion behavior in simulated body fluids is evaluated after immersion for 14 days. The metallic biodegradable material surface was analyzed with a SEM (2 and 3D)+EDAX equipment. The...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics