TITLE

Impedance of a rotating disc electrode with a reversible reaction

AUTHOR(S)
Boillot, M.; Didierjean, S.; Lapicque, F.
PUB. DATE
December 2004
SOURCE
Journal of Applied Electrochemistry;Dec2004, Vol. 34 Issue 12, p1191
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
This paper presents a model of electrode impedance for the case of a fast reversible reaction. The various contributions of the impedance were analysed with particular emphasis on the charge transfer resistance: this resistance was shown to be also dependent on mass transfer phenomena. For the case of significant mass transfer control,the diameter of the high-frequency loop increases with the absolute value of the overpotential. The various physicochemical parameters involved in the expression for impedance were determined through previous measurements. The impedance model was validated by experimental measurements carried out with the hexacyanoferrate (II)–(III) couple ona Pt RDE.
ACCESSION #
15123838

 

Related Articles

  • Electrode surface treatment and electrochemical impedance spectroscopy study on carbon/carbon supercapacitors. Taberna, P. L.; Portet, C.; Simon, P. // Applied Physics A: Materials Science & Processing;Mar2006, Vol. 82 Issue 4, p639 

    Power improvement in supercapacitors is mainly related to lowering the internal impedance. The real part of the impedance at a given frequency is called ESR (equivalent series resistance). Several contributions are included in the ESR: the electrolyte resistance (including the separator), the...

  • Adsorption of thallium cations on RuO2–TiO2 electrodes. Ferro, S.; Donatoni, M.; de Battisti, A.; Andreev, V. N. // Journal of Applied Electrochemistry;Nov2007, Vol. 37 Issue 11, p1389 

    The electrochemical ion-exchange properties of RuO2–TiO2 film electrodes with different composition have been studied in acidic and alkaline media. Thallium-cation uptake has been observed only from the latter and its extent was found to be a function of electrode potential and...

  • Fabrication of system with probe for high-frequency measurement applications. Matsumoto, Keiji; Woon Choi; Tomokage, Hajime // Microwave & Optical Technology Letters;Sep2010, Vol. 52 Issue 9, p2083 

    In this study, a new type of low temperature co-fired ceramic (LTCC) probes fabricated using the system-in-package (SiP) technology is proposed; these probes are used for high-frequency measurements. The advantage of LTCC probes is that suitable structures of the metal tips of their electrodes...

  • SERS- and Electrochemically Active 3D Plasmonic Liquid Marbles for Molecular-Level Spectroelectrochemical Investigation of Microliter Reactions. Koh, Charlynn Sher Lin; Lee, Hiang Kwee; Phan‐Quang, Gia Chuong; Han, Xuemei; Lee, Mian Rong; Yang, Zhe; Ling, Xing Yi // Angewandte Chemie;7/17/2017, Vol. 129 Issue 30, p8939 

    Liquid marbles are emergent microreactors owing to their isolated environment and the flexibility of materials used. Plasmonic liquid marbles (PLMs) are demonstrated as the smallest spectroelectrochemical microliter-scale reactor for concurrent spectro- and electrochemical analyses. The...

  • Generalized Warburg impedance on realistic self-affine fractals: Comparative study of statistically corrugated and isotropic roughness. Kumar, Rajesh; Kant, Rama // Journal of Chemical Sciences;Sep2009, Vol. 121 Issue 5, p579 

    We analyse the problem of impedance for a diffusion controlled charge transfer process across an irregular interface. These interfacial irregularities are characterized as two class of random fractals: (i) a statistically isotropic self-affine fractals and (ii) a statistically corrugated...

  • On the activation and physical degradation of boron-doped diamond surfaces brought on by cathodic pretreatments. Salazar-Banda, Giancarlo R.; Carvalho, Adriana E.; Andrade, Leonardo S.; Rocha-Filho, Romeu C.; Avaca, Luis A. // Journal of Applied Electrochemistry;Oct2010, Vol. 40 Issue 10, p1817 

    The electrochemical activation and physical degradation of boron-doped diamond (BDD) electrodes with different boron doping levels after repeated cathodic pretreatments are reported. Galvanostatic cathodic pretreatment passing up to −14000 C cm in steps of −600 C cm using −1 A...

  • Electrocatalytic reduction of oxygen on the surface of glassy carbon electrodes modified with plumbagin. Ardakani, Mohammad Mazloum; Karami, Payam Ebrahimi; Zare, Hamid Reza; Hamzehloo, Mohammad // Microchimica Acta;Jun2007, Vol. 159 Issue 1/2, p165 

    The preparation and electrochemical characterization of glassy carbon electrodes modified with plumbagin were investigated by employing cyclic voltammetry, chronoamperometry and rotating disc electrode techniques. The cyclic voltammograms of the electroreduction of oxygen showed an enhanced...

  • Electrical resistivity of K-based liquid binaries. Vora, A. M. // Russian Physics Journal;Aug2006, Vol. 49 Issue 8, p834 

    The study of the electrical resistivity of alkali K-based liquid binaries, viz, K 1−x Na x, K 1−x Rb x, and K 1−x Cs x have been made by well recognized model potential. The most recent local field correction functions due to Farid et al. (F) and Sarkar et al. (S) are used for...

  • ac impedance analysis of a Ni-Nb-Zr-H glassy alloy with femtofarad capacitance tunnels. Fukuhara, M.; Seto, M.; Inoue, A. // Applied Physics Letters;1/25/2010, Vol. 96 Issue 4, p043103 

    A Nyquist diagram of a (Ni0.36Nb0.24Zr0.40)90H10 glassy alloy shows a semitrue circle, indicating that it is a conducting material with a total capacitance of 17.8 μF. The Bode plots showing the dependencies of its real and imaginary impedances, and phase on frequency suggest a simpler...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics