TITLE

Ejector Systems

AUTHOR(S)
Karmanov, E. V.; Lebedev, Yu. N.; Chekmenev, V. G.; Aleksandrov, I. A.
PUB. DATE
January 2004
SOURCE
Chemistry & Technology of Fuels & Oils;Jan/Feb2004, Vol. 40 Issue 1, p80
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Assesses the legitimacy of using methods based on use of nomograms that correlate the ejection factor with the degree of expansion of the ejecting gas and degree of compression of the ejected gas for systems with thermophysical properties different from the vapor-air mixtures for which it is recommended. Simulation of the compression in the converging and diverging diffuser sections by two successive compressors.
ACCESSION #
15101965

 

Related Articles

  • Experimental study of centrifugal compressor vaneless diffuser width. Jaatinen-Värri, Ahti; Röyttä, Pekka; Turunen-Saaresti, Teemu; Grönman, Aki // Journal of Mechanical Science & Technology;Apr2013, Vol. 27 Issue 4, p1011 

    Seven different vaneless diffuser designs for a centrifugal compressor, varying only in diffuser width, were studied experimentally. The studied diffuser widths versus impeller exit width were 1.0, 0.903, 0.854, and 0.806. Three of the narrowed diffusers had the width reduced from the hub and...

  • OXYGEN TRANSFER AND AERATION EFFICIENCY - INFLUENCE OF DIFFUSER SUBMERGENCE, DIFFUSER DENSITY, AND BLOWER TYPE. Wagner, Martin R.; Popel, H. Johannes // Water Science & Technology;1998, Vol. 38 Issue 3, p1 

    Shows the influence of the diffuser submergence and density and the type of blower on oxygen transfer and water aeration efficiency. Values of specific oxygen absorption; Volumetric oxygen transfer rate; Energy consumption of the blowers.

  • Rotating Instability of a Centrifugal Compressor with 2-Dimensional Impeller. Kyung Jun Kang; You Hwan Shin; Kwang Ho Kim // AIP Conference Proceedings;6/28/2010, Vol. 1225 Issue 1, p587 

    This study investigated on details of flow characteristics of a compressor with 2-dimensional impeller at various flow rates. Experiment for a low speed compressor model in a water reservoir was performed to analyze the flow field in the vaneless diffuser and volute casing, which was done by PIV...

  • Numerical calculation of turbulent flow in symmetric two-dimensional diffusers. Yang, Y.T.; Hou, C.F. // Acta Mechanica;1999, Vol. 137 Issue 1/2, p43 

    This study presents numerical predictions on the fluid characteristics for turbulent flow in symmetric two-dimenstional diffusers. The grids establizhed by employing the monoorthogonal bodyfitted coordinate system and associating them with the multi-block to handle the complex geometry. The...

  • Fire Free.  // Gifts & Decorative Accessories;Jul2010, Vol. 111 Issue 6, p91 

    The article presents several products that can scent unattended rooms in lieu of candles including the Cate Reed diffuser stand from Greenleaf, room sprays from Esteban Inc, and decorative diffuser set in carved birchwood floral bloom from Fruits & Passion.

  • Numerical Assessment of a Novel Concept for Mitigating the Unsteady Pressure Pulsations Associated to Decelerating Swirling Flow with Precessing Helical Vortex. Tanasa, Constantin; Susan-Resiga, Romeo; Muntean, Sebastian; Stuparu, Adrian; Bosioc, Alin; Ciocan, Tiberiu // AIP Conference Proceedings;2015, Vol. 1702, p1 

    Decelerated swirling flows in conical diffusers can develop self-induced instabilities for some configurations of incoming flow. As a result, an upstream steady and axis-symmetrical flow becomes unsteady and three-dimensional with associated pressure fluctuations that hinder the operation of...

  • Building for People. Turner, Fred // ASHRAE Journal;Jun2013, Vol. 55 Issue 6, preceding p6 

    The article introduces a report about linear slot diffusers published within the issue.

  • Effect of Vaned Diffuser on a Modified Turbocharger Centrifugal Compressor Performance. Jawad, Layth H.; Abdullah, S.; Zulkifli, R.; Mahmood, W. M. F. W. // Applied Mechanics & Materials;2014, Issue 663, p347 

    A numerical study that was made in a three-dimensional flow, carried out in a modified centrifugal compressor, having vaned diffuser stage, used as an automotive turbo charger. In order to study the influence of vaned diffuser meridional outlet section with a different width ratio of the...

  • Centrifugal compressor shape modification using a proposed inverse design method. Nili-Ahmadabadi, Mahdi; Poursadegh, Farzad // Journal of Mechanical Science & Technology;Mar2013, Vol. 27 Issue 3, p713 

    This paper is concerned with a quasi-3D design method for the radial and axial diffusers of a centrifugal compressor on the meridional plane. The method integrates a novel inverse design algorithm, called ball-spine algorithm (BSA), and a quasi-3D analysis code. The Euler equation is solved on...

  • Effects of a Nonuniform Tip Clearance Profile on the Performance and Flow Field in a Centrifugal Compressor. Jung, Yohan; Choi, Minsuk; Oh, Seonghwan; Baek, Jehyun // International Journal of Rotating Machinery;2012, p1 

    This paper presents a numerical investigation of the effects of a nonuniformtip clearance profile on the performance and flow field in a centrifugal compressor with a vaneless diffuser. This study focuses in particular on themagnitude and location of the wake. Six impellers with different tip...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics