TITLE

Stress/strain dependence of ac loss and critical current of Bi2Sr2Ca2Cu3O10 reinforced tape

AUTHOR(S)
Guo Min Zhang; Schwartz, Justin; Sastry, P.V.P.S. S.; Liang Zhen Lin; Li Ye Xiao; Yun Jia Yu
PUB. DATE
November 2004
SOURCE
Applied Physics Letters;11/15/2004, Vol. 85 Issue 20, p4687
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The critical current and ac loss of a stainless steel reinforced Bi2Sr2Ca2Cu3O10 composite superconducting tape were measured under tensile stress/strain at 77 K. By use of the definition of irreversible strain, a formula describing the variation of the critical current with strain was proposed. A relationship between ac loss and tensile strain was developed from Norris' formula and the critical current-strain relation. It is shown that the experimental results agree well with the values calculated from our formulas.
ACCESSION #
15075057

 

Related Articles

  • Implosion dynamics and K-shell x-ray generation in large diameter stainless steel wire array Z pinches with various nesting configurations. Jones, Brent; Coverdale, Christine A.; Deeney, Christopher; Sinars, Daniel B.; Waisman, Eduardo M.; Cuneo, Michael E.; Ampleford, David J.; LePell, P. David; Cochrane, Kyle R.; Thornhill, J. Ward; Apruzese, J. P.; Dasgupta, Arati; Whitney, Kenneth G.; Clark, Robert W.; Chittenden, Jeremy P. // Physics of Plasmas;Dec2008, Vol. 15 Issue 12, p122703 

    Nested stainless steel wire array variations were investigated on the 20 MA Z machine [R. B. Spielman et al., Phys. Plasmas 5, 2105 (1998)]. In order to reach experimentally observed electron temperatures near 3.8 keV and excite the K shell, these ∼6.7 keV photon energy x-ray sources must...

  • Modelling the Material Behaviour of Metastable Stainless Steels. Datta, K.; Geijselaers, H. J. M.; Post, J.; Beyer, J.; Huètink, J. // AIP Conference Proceedings;2007, Vol. 908 Issue 1, p655 

    Metastable austenitic stainless steels are designed to be thermodynamically unstable such that deformation even at room temperatures can bring about a change, in the phase of face centred cubic austenite to either hexagonal close packed martensite and/or to body centred cubic martensite. This...

  • Portable emittance measurement device. Liakin, D.; Seleznev, D.; Orlov, A.; Kuibeda, R.; Kropachev, G.; Kulevoy, T.; Yakushin, P. // Review of Scientific Instruments;Feb2010, Vol. 81 Issue 2, p02B719 

    In Institute for Theoretical and Experimental Physics (ITEP) the portable emittance measurements device is developed. It provides emittance measurements both with “pepper-pot” and “two slits” methods. Depending on the method of measurements, either slits or pepper-pot...

  • RADIAL COMBUSTION DYNAMICS IN Fe2O3/Al THERMITE: VARIABILITY OF THE FLAME PROPAGATION PROFILES. Durães, L.; Plaksin, I.; Antunes, J.; Campos, J.; Portugal, A. // AIP Conference Proceedings;12/28/2009, Vol. 1195 Issue 1, p428 

    In this work, the radial combustion in thin circular samples of stoichiometric and over aluminized Fe2O3/Al mixtures is studied. Two confinement materials are tested: stainless steel and PVC. The combustion front profiles are registered by digital video-crono-photography. The radial geometry...

  • Study on creep deformation mechanism of 316LN stainless steel from impression creep tests.  // Materials at High Temperatures;May2014, Vol. 31 Issue 2, p180 

    Impression creep tests were carried out on 316LN stainless steel (SS) at various temperatures in the range 898-973 K. The stress dependence of the steady state impression velocity followed the power-law with stress exponent n = 6. The temperature dependence of the steady state impression...

  • Effect of irradiation on preliminarily radiation-oxidation-treated stainless steel. Agaev, T. // Metal Science & Heat Treatment;Jan2009, Vol. 51 Issue 1/2, p49 

    Radiolytic processes of decomposition of water on specimens of stainless steel subjected to preliminary radiation-oxidation treatment are studied.

  • Effect of Acidic Environment on the Surface Microhardness of Biodentineâ„¢. Poplai, Gaurav; Jadhav, Sameer K.; Hegde, Vivek // World Journal of Dentistry;Apr-Jun2013, Vol. 4 Issue 2, p100 

    Aim: To compare the effects of various levels of acidic pH on surface microhardness of Biodentine.â„¢ Materials and methods: Biodentine was mixed and packed into stainless steel molds (diameter = 5 mm and height = 1.5 mm). Four groups of 10 specimens each were formed and exposed to pH: 7.4,...

  • Making Stainless Steel Stainless. Magee, John H.; Mohr, Robert K. // Products Finishing;Aug2007, Vol. 71 Issue 11, p32 

    The article focuses on the use of a passivating or electropolishing process to maximize the essential corrosion resistance of stainless steels. Passivation are needed when parts are being fabricated, either by cold forming or machining. Contaminants such as shop dirt or iron particles from...

  • HUGONIOT MEASUREMENTS AT LOW PRESSURES IN TIN USING 800 MeV PROTON RADIOGRAPHY. Schwartz, C. L.; Hogan, G. E.; King, N. S. P.; Kwiatkowski, K.; Mariam, F. G.; Marr-Lyon, M.; McNeil, W. V.; Merrill, F. E.; Morris, C. L.; Rightley, P. M.; Saunders, A. // AIP Conference Proceedings;12/28/2009, Vol. 1195 Issue 1, p517 

    A 20 mm long 8 mm diameter cylindrical tin target has been shocked to a pressure just below the β[bold_arrow]γ phase change, using a small, low density PETN charge mounted on the opposite side of a thin stainless steel diaphragm. The density jump and shock velocity were measured...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics