TITLE

Observation of red intraligand electrophosphorescence from a stilbene-containing Re(I) complex

AUTHOR(S)
Li, Bin; Li, Mingtao; Hong, Ziruo; Li, Wenlian; Yu, Tianzhi; Wei, Hanzhi
PUB. DATE
November 2004
SOURCE
Applied Physics Letters;11/15/2004, Vol. 85 Issue 20, p4786
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Red organic light-emitting diodes using a rhenium(I) bipyridyl complex, fac-[ClRe(CO)3(trans-4-methyl-4'-(2-4-octadecyloxylphenyl)vinyl)-2,2'-bipyridine] (Re-mopvh), as an emitter were fabricated. The optimized device has a bilayer structure of indium-tin oxide/poly(N-vinylcarbazole): 2 wt. % Re-mopvh (80 nm)/2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline (50 nm)/LiF (1 nm)/Al (150 nm). Although no photoluminescence from Re-mopvh in the room-temperature solution appeared due to photoinduced isomerization, a bright red electrophosphorescence from an intraligand excited state of Re-mopvh was observed at room temperature, indicating the promising future of such a class of electroluminescent materials. The maximum luminance exceeding 120 cd/m² at 11 V and maximum efficiency of 0.75 cd/A at 7.5 V were obtained.
ACCESSION #
15075024

 

Related Articles

  • Very high-efficiency organic light-emitting diodes based on cyclometallated rhenium (I) complex. Xiao Li; Dongyu Zhang; Wenlian Li; Bei Chu; Liangliang Han; Jianzhuo Zhu; Zisheng Su; Defeng Bi; Dan Wang; Dongfang Yang; Yiren Chen // Applied Physics Letters;2/25/2008, Vol. 92 Issue 8, p083302 

    A phosphorescent (Ph) cyclometallated rhenium (I) (ReI) complex was synthesized by reacting 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline with pentacarbonylbromorhenium in refluxing toluene solutions. The precipitates were easily sublimed to obtain a pure electrically neutral carbonyl diamine...

  • Combinatorial fabrication and study of doped-layer-thickness-dependent color evolution in bright small molecular organic light-emitting devices. Cheon, K.O.; Shinar, J. // Applied Physics Letters;9/8/2003, Vol. 83 Issue 10, p2073 

    The behavior of [N,N[sup ′]-diphenyl-N,N[sup ′]-bis(1-naphthylphenyl)-1,1[sup ′]-biphenyl-4,4[sup ′]-diamine (α-NPD)]/[5±0.6 wt % [(2-methyl-6-{2-[2,3,6,7-tetrahydro-1H,5H-benzo(i,j)quinolizin-9-yl] ethenyl}-4H-pyran-4-ylidene)propane-dinitrile (DCM2)-doped...

  • Theory of magnesium/Alq[sub 3] interaction in organic light emitting devices. Zhang, R. Q.; Hou, X. Y. // Applied Physics Letters;3/15/1999, Vol. 74 Issue 11, p1612 

    Studies the theory of magnesium/Alq[sub3] interaction in organic light emitting devices. Use of the PM3 method of the molecular orbital theory; Density of the states calculated for the system; Semiempirical molecular orbital approaches.

  • Nonradiative recombination centers and electrical aging of organic light-emitting diodes: Direct connection between accumulation of trapped charge and luminance loss. Kondakov, D. Y.; Sandifer, J. R.; Tang, C. W.; Young, R. H. // Journal of Applied Physics;1/15/2003, Vol. 93 Issue 2, p1108 

    Organic light-emitting diodes (OLEDs) are attractive for display applications because of their high brightness, low driving voltage, and tunable colon Their operating lifetimes, hundreds or thousands of hours, are sufficient for only a limited range of applications. The luminance efficiency...

  • Influence of the thickness and doping of the emission layer on the performance of organic light-emitting diodes with PiN structure. Huang, Jingsong; Blochwitz-Nimoth, Jan; Pfeiffer, Martin; Leo, Karl // Journal of Applied Physics;1/15/2003, Vol. 93 Issue 2, p838 

    We have studied the behavior of various intrinsic emission zones on the characteristics of organic light-emitting diodes with a p-doped hole-transport layer and an n-doped electron-transport layer based on our previous work [J. S. Huang, M. Pfeiffer, A. Wemer, J. Blochwitz, K. Leo, and S. Liu,...

  • Numerical model for organic light-emitting diodes. Tutis, E.; Bussac, M. N.; Masenelli, B.; Carrard, M.; Zuppiroli, L. // Journal of Applied Physics;1/1/2001, Vol. 89 Issue 1, p430 

    An extensive numerical model recently developed for the multilayer organic light-emitting diode is described and applied to a set of real devices. The model contains a detailed description of electrical contacts including dipolar layer formation, thermionic and tunneling injection, space charge...

  • Low voltage organic light-emitting devices with triphenylphosphine oxide layer. Mi-Young Ha; Dae-Gyu Moon // Applied Physics Letters;7/28/2008, Vol. 93 Issue 4, p043306 

    We have developed low voltage driving organic light-emitting devices using triphenylphosphine oxide (Ph3PO) layers. The devices with a Ph3PO layer show high current density at a low voltage. For example, the current density of 20 mA/cm2 is achieved at a low voltage of 2.9 V for the device...

  • Sturcturing boosts OLED efficiency. Bains, Sunny // Laser Focus World;Dec2002, Vol. 38 Issue 12, p21 

    Focuses on the cause of light lost in small-molecule organic light-emitting diodes (OLED) according to researchers in England. Recognition of loss to surface-plasmon (SP) modes; Attempt to improve OLED efficiency; Occurrence of SP modes at the interface between a dielectric and a metal.

  • Temperature dependence of the electron-hole-plasma electroluminescence from metal-oxide-silicon tunneling diodes. Liu, C. W.; Liu, C.W.; Chen, Miin-Jang; Miin-Jang Chen; Lin, I. C.; Lin, I.C.; Lee, M. H.; Lee, M.H.; Lin, Ching-Fuh; Ching-Fuh Lin // Applied Physics Letters;8/21/2000, Vol. 77 Issue 8 

    The temperature performance of metal-oxide-silicon tunneling light-emitting diodes was studied. An electron-hole-plasma model can be used to fit all the emission spectra from room temperature to 98 K. At constant voltage bias in the accumulation region, the normalized integral emission intensity...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics