TITLE

A Five-Step Plan for Using Web Tools to Schedule Campus HVAC Equipment

AUTHOR(S)
Watson, David S.
PUB. DATE
November 2004
SOURCE
Heating/Piping/Air Conditioning Engineering;Nov2004, Vol. 76 Issue 11, p9
SOURCE TYPE
Periodical
DOC. TYPE
Article
ABSTRACT
Presents steps for using an energy-management and control system to schedule heating, ventilation and air-conditioning (HVAC) equipment on college campuses. Way to minimize run time on HVAC equipment; Reasons for not using scheduling based on rooms of buildings; Steps to save energy in using HVAC equipment.
ACCESSION #
14888571

 

Related Articles

  • Thanks to Energy-Management System, Facility Is as Green as It Is Inspiring to Kids.  // Heating/Piping/Air Conditioning Engineering;Nov2010, Vol. 82 Issue 11, p53 

    The article discusses the installation of a BACnet-based energy management system (EMS) for energy-efficient operation. It highlights the move of Hoffman Building Technologies to install a BACnet-based EMS including occupancy-based heating, ventilating, and air conditioning (HVAC) control and...

  • Kick-off General Session.  // Heating/Piping/Air Conditioning Engineering;Aug2011, Vol. 83 Issue 8, p9 

    The article offers information on various sessions related to the heating, ventilation and air conditioning (HVAC) industry in the U.S. including one on the role of buildings in the future energy system, one on the strategies and technologies to consider when planning a net-zero-energy building,...

  • Full of Hot Air? Crockett, Jim // Consulting-Specifying Engineer;Oct2006, Vol. 40 Issue 4, p46 

    The article discusses the upgradation of air ventilation and energy equipment in the Chevron Science Center building of the University of Pittsburgh in Pittsburgh, Pennsylvania. New exhaust and supply systems were installed for the ventilation air-handling unit with energy recovery which...

  • Static Pressure Losses in Nonmetallic Flexible Duct. Weaver, Kevin; Culp, Charles // ASHRAE Transactions;2007, Vol. 113 Issue 2, p400 

    This study measured airflow static pressure losses through nonmetallic flexible ducts in compliance with ANSI/ASHRAE Standard 120-1999, Method of Testing to Determine Flow Resistance of HVAC Ducts and Fittings. Duct sizes of 6, 8, and 10 in. (15.2, 20.3, and 25.4 cm) were tested in a positive...

  • COOL IRRIGATION THERMAL STORAGE. Jankovich, Phil; Connor, Stephen; Wilson, Matt // Engineered Systems;Oct2015, Vol. 32 Issue 10, p36 

    The article highlights the process of designing the irrigation-cooled thermal storage tank and the chilled beam system at the S. J. Quinney College of Law building on the University of Utah campus. It discusses the verification of the design using computational fluid dynamics, results of pipe...

  • THE SUSTAINABLE CARBON NEUTRAL HYBRIDE CHILLER. Meckler, Milton // Engineered Systems;May2011, Vol. 28 Issue 5, p26 

    The article discusses the need for heating, ventilation, and air-conditioning (HVAC) equipment provider to improve the cycle thermal efficiency of its chiller designs in the U.S. It notes the growing popularity of energy-efficient HVAC equipment due to the willingness of companies to lower...

  • CHAPTER 46: DESIGN AND APPLICATION OF CONTROLS.  // ASHRAE Handbook: HVAC Applications (9781931862226);2003, p46.1 

    Chapter 46 of the book "2003 ASHRAE HANDBOOK: Heating, Ventilating, and Air-Conditioning Applications" is presented. It explores design and application of control for heating, ventilating, and air-conditioning (HVAC) elements, typical systems, safe operation specific HVAC applications. It also...

  • College Gives Compressors A-plus for Energy Savings.  // Air Conditioning, Heating & Refrigeration News;8/1/2011, Vol. 243 Issue 14, p16 

    The article reports on the improvement of chiller plant at the Florida State College at Jacksonville (FSCJ) in 2011 to keep their students, faculty and administrative officials comfortable within the campus. It says that the school adopted a first-on, last-off control strategy for its chiller to...

  • Modeling Control Strategies. HIGGINS, JARED A. // ASHRAE Journal;Oct2013, Vol. 55 Issue 10, p96 

    The article discusses different control strategies when working on an energy model. One is optimum start and shop which aims to start and stop the heating, ventilation, and air conditioning system at optimum times through the energy management control system. Another are airside economizers...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics