Welding of Thermoplastics

Ziegler, Dagmar
October 2004
Welding Journal;Oct2004, Vol. 83 Issue 10, p45
Provides information on the welding of thermoplastics. Types of thermoplastic materials; Criteria need to be met in thermoplastic welding; Hot gas extrusion welding; Heated tool butt welding.


Related Articles

  • Laser Beam Welding of AA5052, AA5083, and AA6061 Aluminum Alloys. El-Batahgy, A.; Kutsuna, M. // Advances in Materials Science & Engineering;2009, p1 

    The present investigation was mainly concerned with characteristics of autogeneous laser butt welding of 2mm thickness nonheat treatableAA5052-H12, AA5083-H12 and 2 mm, 3mm thickness heat treatableAA6061-T6 aluminum alloys. The effect of laser welding parameters, surface cleaning, filler wire...

  • Young's modulus and damping in dependence on temperature of Ti-6Al-4V components fabricated by shaped metal deposition. Swarnakar, Akhilesh; Biest, Omer; Baufeld, Bernd // Journal of Materials Science;Jun2011, Vol. 46 Issue 11, p3802 

    Young's modulus and damping behavior is investigated by the impulse excitation technique in vacuum up to 1100 °C for Ti-6Al-4V components, fabricated by shaped metal deposition (SMD). This is a novel additive manufacturing technique where near net-shape components are built layer by layer by...

  • The Impact of Teaching Oxy-Fuel Welding on Gas Metal Arc Welding Skills. Sgro, Sergio D.; Field, Dennis W.; Freeman, Steven A. // Journal of Technology Studies;Spring2009, Vol. 34 Issue 1, p2 

    Industrial technology programs around the country must be sensitive to the demands of manufacturing and industry as they continue to replace "vocational" curriculum with high-tech alternatives. This article examines whether or not teaching oxyacetylene welding in the industrial technology...

  • Opportunities to Serve on Technical Committees.  // Welding Journal;Mar2014, Vol. 93 Issue 3, p66 

    The article offers information on several technical committees who are seeking interested volunteers to participate in their offered activities including the joining of plastics and composites of the G1 Committee, the weld inspection method of the B1 committee, and the oxyfuel gas welding and...

  • Tunneling microscopy, lithography, and surface diffusion on an easily prepared, atomically flat gold surface. Schneir, J.; Sonnenfeld, R.; Marti, O.; Hansma, P. K.; Demuth, J. E.; Hamers, R. J. // Journal of Applied Physics;2/1/1988, Vol. 63 Issue 3, p717 

    Focuses on a study which described that a gold surface with atomically flat terraces can be easily prepared in air by melting a gold wire with an oxyacetylene torch. Methodology; Results; Conclusions.

  • Oxyfuel gouging removes defects, preps welds. Harris, Richard A. // Welding Design & Fabrication;Sep99, Vol. 72 Issue 9, p28 

    Discusses the use of oxyfuel gouging to remove weld defects, trim, shape and prep plate edges for welding in one operation in all positions for steel fabrication and repairs. Comparison with mechanical methods; Use of same equipment as for oxyfuel welding and cutting; Control of the depth of...

  • Hardfacing of AISI 1020 Steel by Arc Welding in Comparison with TIG Welding Processes. Pradeep, G. R. C.; Ramesh, A.; Prasad, B. Durga // Journal of Scientific Research;2013, Vol. 5 Issue 1, p119 

    Hardfacing techniques are used for enhancing the life of various machine parts by rebuilding the worn out or eroded or corroded areas in them. In this paper, an attempt has been made to determine the better welding process to hardface AISI 1020 steel based on study of wear and other factors. Two...

  • Using the Thermal Conductivity Technique. Richardson, Dennis // Gases & Welding Distributor;Nov/Dec2003, Vol. 47 Issue 6, p23 

    Focuses on the principles to be observed and considered for binary gas mixtures in welding shielding gas, heat treating and food packaging processes. General purposes of gas mixture analyzers in the industrial gas industry; Techniques used for gas mixing stations; System of operations of the...

  • Prediction of metal deposition from arc sound and weld temperature signatures in pulsed MIG welding. Pal, Kamal; Bhattacharya, Sandip; Pal, Surjya K. // International Journal of Advanced Manufacturing Technology;Dec2009, Vol. 45 Issue 11/12, p1113 

    The weld deposition efficiency is an important economic factor like productivity and weld quality in gas metal arc welding (GMAW). There is a strong relationship between arc sound signals and arc stability (or deposition efficiency) in GMAW. In this work, the variation of weld deposition...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics