TITLE

Put the School Shops to Work

AUTHOR(S)
Lockard, Joseph P.
PUB. DATE
April 1942
SOURCE
New Republic;4/6/42, Vol. 106 Issue 14, p457
SOURCE TYPE
Periodical
DOC. TYPE
Article
ABSTRACT
Focuses on the utilization of schools for war production in the U.S. Instruction about machine-tool equipment; Expansion of training facilities; Appropriation of large sums for this purpose; Requirement of more than ten million additional workers by the end of this year; Teaching of one worker one skill; Fragmentation of jobs into small units; Adoption of England's single-skill training plan; Supervision of industrial education by the War Production Board.
ACCESSION #
14699712

 

Related Articles

  • Flank Millable Surface Design with Conical and Barrel Tools. Chenggang Li; Bedi, Sanjeev; Mann, Stephen // Computer-Aided Design & Applications;2008, Vol. 5 Issue 1-4, p461 

    This paper presents a method for creating a flank millable surface for conical and barrel tools. The approach is a generalization of an earlier approach for cyclindrical tools, where the tool is moved along two guiding curves and a NURBS approximation is created for the swept surface. The...

  • LETTERS. Hawkins, William; Weigel, Denver J.; Oberg, James; Carlton, Jim // American Machinist;Mar2007, Vol. 151 Issue 3, p10 

    Several letters to the editor are presented in response to an article on whether shop classes should switch to teaching students computer numerical control (CNC) machining rather than manual one that was published in the January 2007 issue.

  • Fly by numbers. Oakham, Martin // MWP;Nov2007, Vol. 151 Issue 6, p72 

    The article explores the need for efficient production methods in 5-axis multitasking machining centres. This resulted for machine builders to adapt the CAM systems software to control and drive the new 5-axis setups. The benefits of the 5-axis setups include machining flexibility and accuracy,...

  • Influence of Fixtures on Dimensional Accuracy in Machining Processes. Estrems, M.; S├ínchez, H.T.; Faura, F. // International Journal of Advanced Manufacturing Technology;Mar2003, Vol. 21 Issue 5, p384 

    The main function of fixturing devices in machining processes consists of locating a workpiece on a work table in a machine tool. As well as having a locating function, fixtures must also ensure that the dimensional quality of the manufactured workpiece can be achieved. In this paper, a...

  • Intermittent Process Measurement of a Freeform Surface Profile with a Circular Triangulation Laser Probe on a Machining Centre. Shiou, F.-J.; Chen, M.-J. // International Journal of Advanced Manufacturing Technology;Mar2003, Vol. 21 Issue 5, p365 

    This paper describes the development of a non-contact type system for measuring a freeform surface on a machine tool. A laser probe, model OTM-3A20 made by Wolf & Back Co., was integrated into a CNC machining centre as a non-contact sensor. An adjustment device for the laser probe was designed...

  • Automated Cell Demonstrates Alternate Workholding Method. Korn, Derek; Steigerwald, Shauna R. // Modern Machine Shop;Jul2006, Vol. 79 Issue 2, p42 

    This article reports that Master Work-Holding has added a machining cell within its Morganton, North Carolina facility to demonstrate the workholding capabilities of the company's Light Activated Adhesive Gripping (LAAG) system. The cell combines the LAAG workholding system with a Haas VMC and...

  • Alcohol-Based Coolant Offers Environmentally Friendly Machining. Korn, Derek // Modern Machine Shop;Jul2006, Vol. 79 Issue 2, p56 

    This article explains that ethanol may soon a bigger role not only in the way future vehicles are powered, but also how micro tools are cooled during high speed machining (HSM) operations. Datron Dynamics of Milford, New Hampshire has developed a micro-volume coolant delivery system for its high...

  • Inventing Your Own Compensation Types. Lynch, Mike // Modern Machine Shop;Jul2006, Vol. 79 Issue 2, p108 

    This article explains that CNC machining centers provide users with three compensation types: tool length compensation, cutter radius compensation and fixture offsets. CNC turning centers provide wear offsets, geometry offsets and tool nose radius compensation. Each compensation type references...

  • Less is more. Excell, Mike // Metalworking Production;Sep2006, Vol. 150 Issue 8, p5 

    The article reflects on the changes in the global machine tool market. According to the author, this market has undergone dramatic change. Machine tool builders have disappeared or merged, while the proportion of machine tools sold into expanding overseas economies has soared. There have been...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics