new products

August 2004
SMT: Surface Mount Technology;Aug2004, Vol. 18 Issue 8, p49
Presents several products related to the electronics industry. Solder reflow system; Stencil technology; Cleaning materials and equipment; Assembly tools and equipments.


Related Articles

  • Pb-Free Lemons? Don't Be Suckered. Shea, Chrys // Circuits Assembly;Nov2008, Vol. 19 Issue 11, p42 

    The author offers insights about lead (Pb)-free soldering in U.S. consumer electronics assembly. Within the electronics industry, extended warranties are service plans that sell for 30 to 50 percent of the list product price. However, currently, every high-volume assembler of consumer...

  • If You're Going to Do It, Do It Right...Right? van Gastel, Sjef // SMT: Surface Mount Technology;Feb2013, Vol. 28 Issue 2, p90 

    The two major causes of defects are poor solder printing, estimated to cause over 50 to 70% of equipment defects, and pick-and-place errors, which cause the rest. Developing a process to detect defects early means an incredible savings opportunity that manufacturers can't afford to ignore.

  • Quieting the Noise. Diepstraten, Gerjan // Circuits Assembly;Jul2005, Vol. 16 Issue 7, p40 

    This article provides information on wave soldering. The wave solder process is characterized by a large number of process parameters. Wave soldering has a number of sub-processes, which include fluxing, preheating, soldering and cooling. Although a good wave soldering machine provides a large...

  • What to Look for When Qualifying a New Process (Part I). Munson, Terry // Circuits Assembly;Sep2007, Vol. 18 Issue 9, p52 

    The article presents a study which aimed to qualify the primary and secondary soldering operations processes. According to the article, the Umpire Test assembly is used to observe the interactions of top- and bottom-side surface mount technology, wave solder, selective solder, hand solder and...

  • Interfacial Reaction between 42Sn-58Bi Solder and Electroless Ni-P/Immersion Au Under Bump Metallurgy during Aging. Moon Gi Cho; Kyung Wook Paik; Hyuck Mo Lee; Seong Woon Booh; Tae-Gyu Kim // Journal of Electronic Materials;Jan2006, Vol. 35 Issue 1, p35 

    The interfacial reaction between 42Sn-58Bi solder (in wt.% unless specified otherwise) and electroless Ni-P/immersion Au was investigated before and after thermal aging, with a focus on the formation and growth of an intermetallic compound layer, consumption of under bump metallurgy (UBM), and...

  • Screen Printing. Philbrick, Doug; Vaughn, Richard; Puckett, Bruce; Jensen, Craig; Robertson, Glenn; Zarrow, Phil; Heimsch, Rich // Circuits Assembly;Feb2003, Vol. 14 Issue 2, p18 

    Presents several tips on screen printing. Apparatus required for screen printing; Position of the apparatus; Conditions required for keeping solder paste.

  • Solderability in a Lead-Free World. Hymes, Les // Circuits Assembly;Feb2004, Vol. 15 Issue 2, p71 

    This article explores the question as whether lead-free solder affect solderability and soldering inspection standards. The author says that solderability verification testing may be carried out at the component supplier's plant, upon receipt into the assembly shop inventory or prior to release...

  • Solderability and Traceability. Hymes, Les // Circuits Assembly;May2003, Vol. 14 Issue 5, p20 

    Addresses surface finish concerns and component identity tracking in integrated circuits assembly line. Effectiveness of hot-air solder leveling surface finish on the boards; Way to track components having a specific printed circuit assembly serial number in well-controlled assembly shops.

  • HOP-ping Mad. Shea, Chrys // Circuits Assembly;Jul2008, Vol. 19 Issue 7, p72 

    The article presents information on head-on-pillow (HOP) defect, a solder paste deposit on the printed circuit board which melts and fuses in the reflow oven. It is important to check first the sphere material if HOP problems suddenly appear on an assembly line. The factors causing HOP defects...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics