TITLE

Fuel cells are stacks cheaper

AUTHOR(S)
Lee, Andrew
PUB. DATE
September 2004
SOURCE
Engineer (00137758);9/10/2004, Vol. 293 Issue 7659, p9
SOURCE TYPE
Periodical
DOC. TYPE
Article
ABSTRACT
No abstract available.
ACCESSION #
14448871

 

Related Articles

  • A Solid-polymer Electrolyte Direct Methanol Fuel Cell with a Methanol-tolerant Cathode and its Mathematical Modelling. Raman, R. K.; Murgia, G.; Shukla, A. K. // Journal of Applied Electrochemistry;Oct2004, Vol. 34 Issue 10, p1029 

    Solid-polymer electrolyte direct methanol fuel cells (SPE-DMFCs) employing carbon-supported Pt-Fe as oxygenreduction catalyst to mitigate the effect of methanol on cathode performance while operating with oxygen or air have been assembled. These SPE-DMFCs provided maximum power densities of 250...

  • Cell Configurations for Performance Evaluation in Planar Solid Oxide Fuel Cells. Jiang, S. P. // Journal of Applied Electrochemistry;Oct2004, Vol. 34 Issue 10, p1045 

    Cell configurations with asymmetric and symmetric electrode geometries and different reference electrode positions were investigated on 50 mm × 50 mm planar solid oxide fuel cells (SOFC). The reliability and accuracy of the polarization performance of individual electrodes were studied with...

  • Three-Dimensional Modeling and Development of the New Geometry PEM Fuel Cell. Khazaee, Iman; Ghazikhani, Mohsen // Arabian Journal for Science & Engineering (Springer Science & Bu;Jun2013, Vol. 38 Issue 6, p1551 

    A complete three-dimensional and single phase computational fluid dynamics model for duct-shaped geometry proton exchange membrane (PEM) fuel cell was used to investigate the effect of using different connections between bipolar plate and gas diffusion layer on the performances, current density...

  • ENERGY.  // Advanced Materials & Processes;Apr2005, Vol. 163 Issue 4, p85 

    Focuses on the impact of electronic technology on fuel cell development. Emergence of the advanced coal-cleaning system to recover fine coal from ponds; Development of hydrogen from re-forming natural gas and coal gasification; Background on the concept of fuel cell development.

  • Overcoming the low-dimension crisis in the active zone of fuel cells. Kompan, M. E.; Sapurina, I. Yu.; Stejskal, J. // Technical Physics Letters;Mar2006, Vol. 32 Issue 3, p213 

    A substantially new type of fuel cell (FC) architecture is proposed, which must provide for an increase in the efficiency above the level achieved with FCs designed according to the traditional scheme. A prototype material necessary for the creation of FCs of the new type with active zones has...

  • Polymer electrolytes for fuel cells. Kulshreshtha, Anand Kumar // Chemical Business;Jul2005, Vol. 19 Issue 7, p18 

    Presents information on a study which investigated the importance of fuel cells. History of fuel cells; Types of fuel cells; Applications for fuel cells; Approaches recommended to the commercialization of fuel cells.

  • Effect of Hot Pressing on the Performance of Direct Methanol Fuel Cells. Song, C.; Pickup, P. G. // Journal of Applied Electrochemistry;Oct2004, Vol. 34 Issue 10, p1065 

    The effects of hot pressing of electrodes onto Nafion® membranes in the preparation of membrane and electrode assemblies for direct methanol fuel cells have been investigated. Hot pressing does not significantly influence the cell resistance or methanol crossover, but it can decrease cell...

  • Experimental investigation of operating parameters and control the performance of a PEM fuel cell. Khazaee, I.; Ghazikhani, M. // International Journal of Energy & Environment;2012, Vol. 3 Issue 3, p461 

    In this study, the performance of a PEM fuel cell is investigated experimentally. Some parameters such as input oxygen temperature (T02 ), input hydrogen temperature (TH2 ), cell temperature ( cell T ), input pressure (P), oxygen flow rate (m02 ) and hydrogen flow rate (m02 ) affect the...

  • METHOD OF FORMING MEMBRANE-ELECTRODE UNIT OF PORTABLE FUEL CELL AND ITS INVESTIGATION. KISELEVA, E. A.; BERENGARTEN, M. G.; SEVASTYANOV, A. P.; SHKOLNIKOV, E. I. // Izvestiya Vysshikh Uchebnykh Zavedenii. Seriya Khimiya i Khimich;2012, Vol. 55 Issue 9, p86 

    The method for producing the membrane-electrode unit of portable fuel cell was developed. The paper presents a brief description of developed method as well as athe method and experimental results. The influence of solvent type, of the catalyst composition and the volume fraction of polymer on...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics