TITLE

Laser-induced wavy pattern formation in metal thin films

AUTHOR(S)
Xiao, Ke; Guan, Zi Sheng; Wang, Guo Jie; Jiang, Lei; Zhu, Dao Ben; Wang, Yu Ren
PUB. DATE
September 2004
SOURCE
Applied Physics Letters;9/13/2004, Vol. 85 Issue 11, p1934
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Laser-induced well-ordered and controllable wavy patterns are constructed in the deposited metal thin film. The micrometer-sized structure and orientation of the wavy patterns can be controlled via scanning a different size of rectangle laser spot on the films. Ordered patterns such as aligned, crossed, and whirled wave structures were designed over large areas. This patterning technique may find applications in both exploring the reliability and mechanical properties of thin films, and fabricating microfluidic devices.
ACCESSION #
14434619

 

Related Articles

  • Preparation of Glass Plate-Supported Nanostructure ZnO Thin Film Deposited by Sol-Gel Spin-Coating Technique and Its Photocatalytic Degradation to Monoazo Textile Dye. Habibi, Mohammad Hossein; Sardashti, Mohammad Khaledi // Journal of Nanomaterials;2008 Special Issue 2, p1 

    Glass plate-supported nanostructure ZnO thin films were deposited by sol-gel spin coating. Films were preheated at 275°C for 10 minutes and annealed at 350, 450, and 550°C for 80 minutes. The ZnO thin films were transparent ca 80-90% in visible range and revealed that absorption edges at...

  • Herringbone buckling patterns of anisotropic thin films on elastomeric substrates. Song, J. // Applied Physics Letters;2/1/2010, Vol. 96 Issue 5, p051913 

    Highly ordered herringbone buckling patterns have been observed in stiff thin films on elastomeric substrates under an equibiaxial compression. Existing mechanics models assume the thin film to be isotropic, which does not agree with recent experiments of single crystal thin films (e.g.,...

  • Orientation-dependent multiferroic properties in Pb(Zr0.52Ti0.48)O3–CoFe2O4 nanocomposite thin films derived by a sol-gel processing. He, Hong-cai; Ma, Jing; Wang, Jing; Nan, Ce-Wen // Journal of Applied Physics;Feb2008, Vol. 103 Issue 3, p034103 

    Bilayered multiferroic nanocomposite films of preferentially oriented Pb(Zr0.52Ti0.48)O3 (PZT) and CoFe2O4 (CFO) were prepared on general Pt/Ti/SiO2/Si substrate via a simple solution processing. Different annealing processings resulted in different preferential orientations for the PZT layers...

  • White light emission on amplified spontaneous emission with dye content controlled polymer system. Zhang, Dingke; Chen, Zhenyu; Ma, Dongge // Journal of Applied Physics;Jun2008, Vol. 103 Issue 12, p123103 

    White light emission from amplified spontaneous emission (ASE) was realized by optically pumping fluorescent dye 4-(dicy-anomethylene)-2-t-butyl-6(1,1,7,7-tetramethyljulolidyl-9-enyl)-4H-pyran (DCJTB) doped semiconducting poly(9,9-dioctylfluorene) (PFO) polymer thin films. Two individual ASE...

  • The role of SrRuO3 bottom layer in strain relaxation of BiFeO3 thin films deposited on lattice mismatched substrates. Shelke, Vilas; Mazumdar, Dipanjan; Srinivasan, G.; Gupta, Arunava // Journal of Applied Physics;Apr2011, Vol. 109 Issue 7, p07D914 

    The present study deals with BiFeO3 and SrRuO3 thin films deposited on large lattice mismatched substrates like LaAlO3, MgO, and SrTiO3. The 80 nm thickness BiFeO3 films deposited directly on LaAlO3 substrate are highly constrained, while those on SrTiO3 substrate are only somewhat constrained....

  • Solid-state dewetting of Pt on (100) SrTiO. Atiya, Galit; Mikhelashvili, Vissarion; Eisenstein, Gadi; Kaplan, Wayne // Journal of Materials Science;Jun2014, Vol. 49 Issue 11, p3863 

    Continuous thin films of Pt on (100) SrTiO substrates were dewetted to form Pt particles at 1,150 °C, using an oxygen partial pressure of 10 atm. After retraction of thick (50 or 100 nm) Pt films, SrTiO anisotropic rods, slightly depleted in Ti, were found on the surface of the substrate....

  • Influence of relative thickness on multiferroic properties of bilayered Pb(Zr0.52Ti0.48)O3–CoFe2O4 thin films. He, Hong-cai; Ma, Jing; Lin, Yuanhua; Nan, C. W. // Journal of Applied Physics;Dec2008, Vol. 104 Issue 11, p114114 

    Multiferroic bilayered thin films consisting of Pb(Zr0.52Ti0.48)O3 (PZT) and CoFe2O4 (CFO) layers of different relative thicknesses were prepared on a general Pt/Ti/SiO2/Si substrate via a simple solution processing. The influence of the thickness fraction on their properties including...

  • Variation of structural, electrical, and optical properties of Zn1-xMgxO thin films. Jae Won Kim; Hong Seong Kang; Jong Hoon Kim; Sang Yeol Lee; Jung-Kun Lee; Nastasi, Michael // Journal of Applied Physics;8/1/2006, Vol. 100 Issue 3, p033701 

    Zn1-xMgxO thin films on (001) sapphire substrates were deposited using pulsed laser deposition. As the substrate temperature increased, the Mg content in the Zn1-xMgxO thin films increased and the photoluminescence (PL) peak position of the Zn1-xMgxO thin films shifted from 370 to 356 nm,...

  • Improvement of thermal stability of amorphous CoFeSiB thin films. Jimbo, M.; Fujiwara, Y.; Shimizu, T. // Journal of Applied Physics;2015, Vol. 117 Issue 17, p17A313-1 

    The excellent soft magnetic properties of amorphous (a-) CoFeSiB films make it suited for use in the yoke of granular-in-gap sensors, but only if their thermal stability can be improved. To this end, this study investigated the effects of adding small amounts of other metals on the magnetic and...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics