TITLE

Superconducting coatings of MgB2 prepared by electrophoretic deposition

AUTHOR(S)
Ochsenkuhn-Petropoulou, Maria T.; Altzoumailis, Alexandros F.; Argyropoulou, Rachel; Ochsenkühn, Klaus-Michael
PUB. DATE
July 2004
SOURCE
Analytical & Bioanalytical Chemistry;Jul2004, Vol. 379 Issue 5/6, p792
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The electrophoretic deposition technique was applied for the production of MgB2 superconducting coatings on various substrates, by using a suspension of MgB2 superconducting powder in an organic solvent. The main parameters that affect the deposition rate of the process and the quality of the coatings produced, such as the initial concentration of the suspension, the applied voltage and the distance between the electrodes, were investigated and optimized. The coatings produced were characterized and investigated for possible interaction between the substrate and the deposited superconductor by X-ray diffraction. The superconducting properties were measured by magnetic susceptibility (superconducting quantum interference device).
ACCESSION #
14387466

 

Related Articles

  • Research on MgB bulk superconductors exposed to Ag nanoparticles diffusion. Sarıtekin, N.; Doğruer, M.; Yıldırım, G.; Terzioğlu, C. // Journal of Materials Science: Materials in Electronics;Jul2014, Vol. 25 Issue 7, p3127 

    Studies of microstructural, mechanical and superconducting properties of Ag diffused MgB superconductors by way of scanning electron microscopy, X-ray diffraction and Vickers microhardness measurements. A systemic examination of the magnetoresistance measurements for our prepared samples is...

  • Study of Densification Process and Microstructure for Highly Dense Doped MgB Bulk Samples. Yonamine, A.; Saeki, M.; Eiras, J.; Santos, D. // Journal of Superconductivity & Novel Magnetism;Oct2012, Vol. 25 Issue 7, p2157 

    In order to give a contribution in the subject of MgB processing technique to obtain low cost high density bulk samples with improved superconducting properties, studies on dilatometry and on the microstructures of in situ and ex situ MgB bulk samples prepared in the presence of carbon compounds...

  • Enhanced hardness of CrAlSiN/W2N superlattice coatings deposited by direct current magnetron sputtering. Tsai, Y. Z.; Duh, J. G. // Journal of Materials Research;Dec2010, Vol. 25 Issue 12, p2325 

    CrAlSiN/W2N nanolayered coatings were prepared by direct current magnetron sputtering. The modulation periods of multilayer coatings were controlled in the range from 3 to 20 nm. From the low angle x-ray diffraction and high angle x-ray diffraction (XRD) satellite peaks, the superlattice...

  • Photoluminescence Studies on Spray Pyrolysis Deposited ZnO-SnO2 Mixed Thin Films. Tharsika, T.; Haseeb, A. S. M. A.; Sabri, M. F. M. // Advanced Materials Research;2014, Issue 925, p318 

    ZnO-SnO2 mixed thin films were prepared by the spray pyrolysis technique using different molar ratios of zinc and tin in the starting solution. These mixed thin films were analysed by X-ray diffraction (XRD) and photoluminescence spectroscopy (PL). XRD patterns of mixed thin films indicate the...

  • Phase evolution in Ba-(Nd,Eu,Gd)-Cu-O-coated conductor films. Wong-Ng, W.; Levin, I.; Ritter, J.; Cook, L. P.; Liu, G.; Otani, M.; Vaudin, M.; Lucas, C.; Diwanji, S. P.; Feenstra, R. // Journal of Materials Research;Aug2008, Vol. 23 Issue 8, p4 

    Phases that are in equilibrium with BaR2CuO6+χ (R=lanthanides and Y), such as the "green-phase" and "brown-phase" structural variants of BaR2CuO5 in bulk samples, are attractive choices for flux-pinning for coated conductor applications because of the guaranteed chemical stability. In films,...

  • Fabrication and Properties of MgB Coated Superconducting Tapes. Sinha, B.; Chung, K. // Journal of Superconductivity & Novel Magnetism;May2013, Vol. 26 Issue 5, p1507 

    We present the formation of MgB coatings by simple and novel aerosol deposition technique which has a potential to escalate towards the fabrication of long superconducting tapes. The thin MgB coatings were produced by using pre-synthesized MgB powder. The ability of this technique to form a...

  • Creating Pathways in Subsurface of PFA/Aerosil Composite Membranes as a Way of Achieving Fluid Transport. Salejova, Gabriela; Kang Li; Livingston, Andrew G.; Bismarck, Alexander // Journal of Materials Science & Engineering A;2012, Vol. 2 Issue 3, p273 

    Melt processing throughout the assistance of torque rheometer is proposed as an alternative route for melt processable thermoplastic fluoropolymer Hyflon� perfluoroalkoxy (PFA) to be compounded with nano-sized Aerosil�. Fusion behaviour and adhesion between smooth hydrophobic semi...

  • Modification of spin coating method and its application to grow thin films of cobalt ferrite. Sathaye, S. D.; Patil, K. R.; Kulkarni, S. D.; Bakre, P. P.; Pradhan, S. D.; Sarwade, B. D.; Shintre, S. N. // Journal of Materials Science;Jan2003, Vol. 38 Issue 1, p29 

    Spin coating method has been modified to widen its scope for applications. The film deposition assembly is suitably designed. With this modification, it is possible to use common inorganic chemicals in the form of their aqueous solutions as starting materials to grow thin films of binary/ternary...

  • Development of superconducting phases in BSCCO and Ba-BSCCO by sol spray process. Durrani, S. K.; Qureshi, A. H.; Qayyum, S.; Arif, M. // Journal of Thermal Analysis & Calorimetry;Jan2009, Vol. 95 Issue 1, p87 

    The effects of barium substitution for Bi or Sr sites on the growth of superconducting phases have been studied. The sol spray process has been used to synthesis the Bi-Sr-Ca-Cu-O (BSCCO) and Ba-BSCCO homogeneous ceramic powders. Thermogravimetric (TG), differential thermal analysis (DTA), X-ray...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics