TITLE

Corrosion Behaviour of Ti–6Al–4V Alloy in Concentrated Hydrochloric and Sulphuric Acids

AUTHOR(S)
Mogoda, A.S.; Ahmad, Y.H.; Badawy, W.A.
PUB. DATE
September 2004
SOURCE
Journal of Applied Electrochemistry;Sep2004, Vol. 34 Issue 9, p873
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Open-circuit potential, polarization and electrochemical impedance spectroscopy (EIS) measurements were used to investigate the corrosion behaviour of Ti–6Al–4V alloy in H2SO4 and HCl solutions. The corrosion rate of the alloy was found to increase with increasing acid concentration. The corrosion behaviour of the alloy was compared to that of pure titanium in both acids. The results showed that the alloy is more corrosion resistant than pure titanium in the investigated solutions. The apparent activation energies of the corrosion process for titanium are lower than those of the alloy in the same solutions, which reflects the higher corrosion resistance of the alloy.
ACCESSION #
14360897

 

Related Articles

  • Microstructural Evolution in Laser-Deposited Multilayer Ti-6Al-4V Builds: Part II. Thermal Modeling. Kelly, S. M.; Kampe, S. L. // Metallurgical & Materials Transactions. Part A;Jun2004, Vol. 35 Issue 6, p1869 

    The thermal history developed in laser metal deposition (LMD) processes has been shown to be quite complex and results in the evolution of an equally complex microstructure. A companion article (Part I. Microstructural Characterization) discussed the LMD of Ti-6Al-4V, where the resultant...

  • Microstructural Evolution in Laser-Deposited Multilayer Ti-6Al-4V Builds: Part I. Microstructural Characterization. Kelly, S. M.; Kampe, S. L. // Metallurgical & Materials Transactions. Part A;Jun2004, Vol. 35 Issue 6, p1861 

    The macro and microstructure of laser-deposited Ti-6Al-4V has been investigated to determine the evolution of unique microstructural features in multilayer builds. The macro and microstructures exhibited in the build include large, columnar prior-beta grains, a gradient in the individual...

  • Study for Corrosion and Hydrogen Evolution Behavior of Ti-6Al-4V Alloy in Simulated Acid Rain Water. Tammam, R.; Fekry, A. // Journal of Materials Engineering & Performance;Mar2014, Vol. 23 Issue 3, p715 

    The electrochemical behavior of Ti-6Al-4V alloy was investigated using electrochemical impedance spectroscopy (EIS) measurements at the open circuit potentials and potentiodynamic polarization measurements in a simulated acid rain containing inorganic additives. The ac circuit model for...

  • Influence of temperature on the electrochemical characteristics of Ti-6Al-4V. Ivašková, Martina; Lovíšek, Martin; Jančovič, Peter; Bukovinová, Lenka // Materials Science Forum;2014, Vol. 811, p77 

    Titanium is not only the most widely used biomaterial for medical implants, but with its very good mechanical properties, corrosion resistance and low density is also applied in many sectors of industry (aerospace, military, aviation, machinery, energetics, chemicals, etc.). In this paper it is...

  • Influence of anodic oxidation on the polarization resistance of Ti6Al4V alloy after shot peening. Pastorek, Filip; Hadzima, Branislav; Fintová, Stanislava; Mhaede, Mansour // Materials Science Forum;2014, Vol. 811, p59 

    Ti6Al4V titanium alloy is widely used for industrial and medical applications. Several techniques of surface treatment are used to improve their mechanical, fatigue or corrosion properties like shot peening or anodic oxidation. The effect of these techniques combination on corrosion resistance...

  • Fatigue and Fracture Toughness of Ti-6Al-4V Titanium Alloy Manufactured by Selective Laser Melting. DHANSAY, Nur Mohamed; TAIT, Robert; BECKER, Thorsten // Advanced Materials Research;2014, Issue 1019, p248 

    Additive manufacturing (AM) has gained significant interest in recent years as components can be produced to near net shape from metallic powders with data obtained directly from a 3D CAD model. Selective laser melting (SLM) is an AM technique which may be a viable alternative to conventional...

  • Mechanochemical Processing of Nanocrystalline Ti-6Al-4V Alloy. Pirzada, M. D. S.; Patankar, S. N.; Froes, F. H. (Sam) // Metallurgical & Materials Transactions. Part A;Jun2004, Vol. 35 Issue 6, p1899 

    Synthesis of nanocrystalline Ti-6Al-4V was explored using mechanochemical processing. The reaction mixture was comprised of CaH2, Mg powder, anhydrous AlCl3, anhydrous VCl3, and TiCl4. The milled powder (reaction product) primarily consisted of nanocrystalline alloy hydride having a...

  • Influence of Interface Microstructure on the Strength of the Transition Joint between Ti-6Al-4V and Stainless Steel. Ghosh, M.; Kundu, S.; Chatterjee, S.; Mishra, B. // Metallurgical & Materials Transactions. Part A;Jul2005, Vol. 36 Issue 7, p1891 

    Solid-state diffusion bonding of Ti-6Al-4V and type 304 SS was investigated in the temperature range of 750 °C to 950 °C, under a uniaxial load for 5.4 ks in vacuum. The diffusion bonds were characterized using light and scanning electron microscopy. The scanning electron microscopic...

  • Effect of Aged Microstructure on the Strength and Work Hardening Behavior of Ti-15V-3Cr-3Sn-3Al Alloy. Sarkar, Rajdeep; Mukhopadhyay, A.; Ghosal, P.; Nandy, T.; Ray, K. // Metallurgical & Materials Transactions. Part A;Aug2015, Vol. 46 Issue 8, p3516 

    This investigation is aimed at revealing the deformation behavior of a β-Ti alloy, namely Ti-15V-3Cr-3Sn-3Al, under various aged conditions with an emphasis on correlating the work hardening characteristics of the alloy with its corresponding microstructure. The alloy was cast, forged, hot...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics