TITLE

Bright white light electroluminescent devices based on a dye-dispersed polyfluorene derivative

AUTHOR(S)
Joo Hyun Kim; Herguth, Petra; Mun-Sik Kang; Jen, Alex K-Y.; Ya-Hsien Tseng; Ching-Fong Shu
PUB. DATE
August 2004
SOURCE
Applied Physics Letters;8/16/2004, Vol. 85 Issue 7, p1116
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
A series of efficient and bright white light-emitting diodes were fabricated using the blends of two fluorene-derived fluorescent dyes, (4,7-bis-(9,9,9′,9′-tetrahexyl-9H,9′H-[2,2′]bifluoren-7-yl)-benzo[1,2,5]thiadiazole) (FFBFF-emits green) and (4,7-bis-[5-(9,9-dihexyl-9H-fluoren-2-yl)-thiophen-2-yl]-benzo[1,2,5]thiadiazole) (FTBTF-emits red) in an efficient blue-emitting polyfluorene-derived copolymer (poly[(9,9-bis(4-di(4-n-butylphenyl)aminophenyl))]-stat-(9,9-bis(4-(5-(4-tert-butylphenyl)-2-oxadiazolyl)-phenyl))-stat-(9,9-di-n-octyl)fluorene) (PF-TPA-OXD). The resulting white light-emitting device reaches a maximum external quantum efficiency of 0.82% and a maximum brightness of 12 900 cd/m2 at 12 V. The Commission Internationale d’Énclairage chromaticity coordinates of the device remain very close to that of pure white emission at a relatively broad bias range from 6 V (x=0.36, y=0.37) to 12 V (x=0.34, y=0.34).
ACCESSION #
14085057

 

Related Articles

  • Highly efficient white organic electroluminescent devices based on tandem architecture. Chan-Ching Chang; Jenn-Fang Chen; Shiao-Wen Hwang; Chen, Chin H. // Applied Physics Letters;12/19/2005, Vol. 87 Issue 25, p253501 

    Two types of tandem organic light-emitting diodes (OLEDs) with white-light emission have been developed by using Mg:Alq3/WO3 as the interconnecting layer. While the Commission Internationale d’Eclairage (CIE) coordinates of the tandem device with individual blue- and yellow-emitting OLEDs...

  • Improved electroluminescent efficiency of organic light emitting devices by co-doping N, N′-Dimethyl-quinacridone and Coumarin6 in tris-(8-hydroxyquinoline) aluminum. Su, W. M.; Li, W. L.; Hong, Z. R.; Li, M. T.; Yu, T. Z.; Chu, B.; Li, B.; Zhang, Z. Q.; Hu, Z. Z. // Applied Physics Letters;11/21/2005, Vol. 87 Issue 21, p213501 

    Electroluminescent (EL) efficiency of organic light emitting devices was improved by co-doping N, N′-dimethyl-quinacridone (DMQA) and Coumarin6 (C6) in tris-(8-hydroxyquinoline) aluminum (Alq3). At 20 mA/cm2, superior EL efficiency of 9.33 cd/A was obtained from 1.6% co-doped (0.8% DMQA...

  • Organic light-emitting diodes based on a blend of poly[2-(2-ethylhexyloxy)-5-methoxy-1,4-phenylenevinylene] and an electron transporting material. Ahn, J. H.; Wang, C.; Pearson, C.; Bryce, M. R.; Petty, M. C. // Applied Physics Letters;8/16/2004, Vol. 85 Issue 7, p1283 

    Organic light-emitting devices (OLEDs) containing a blend of poly[2-(2-ethylhexyloxy)-5-methoxy-1,4-phenylenevinylene] (MEH-PPV) and an electron transporting material, 2,7-bis[2-(4-tert-butylphenyl)-1,3,4-oxadiazol-5-yl]-9,9-dihexylfluorene have been fabricated. The external quantum efficiencies...

  • LED lighting continues inroads in illumination. LaFlamme, J. Marcel // Vision Systems Design;Nov2006, Vol. 11 Issue 11, p19 

    The article focuses on the advances in the development of light emitting diodes (LED) lighting. According to the author, the initial goal of LED-based lighting designers was to combine the electroluminescence properties of a semiconductor material with nonimaging optics to produce an intense...

  • DEMYSTIFYING THE DATA SHEET.  // EDN Europe;Dec2004, Vol. 49 Issue 12, p24 

    Analyzes the spectral output of light emitting diodes (LED). Differences between high-power and low-power LEDs; Factors affecting the luminous intensity of a Lamberian emitter; Citation of several alternatives for measuring LED outputs.

  • Selective oxidation of AlInN layers for current confinement in III–nitride devices. Dorsaz, J.; Bühlmann, H.-J.; Carlin, J.-F.; Grandjean, N.; Ilegems, M. // Applied Physics Letters;8/15/2005, Vol. 87 Issue 7, p072102 

    Highly selective oxidation of an AlInN interlayer buried in a GaN matrix is demonstrated. This technique was successfully applied to form current apertures in III-nitride light-emitting diodes (LEDs). GaN LEDs were grown by metal-organic vapor phase epitaxy with a lattice-matched AlInN layer...

  • Emission characteristics in solution-processed asymmetric white alternating current field-induced polymer electroluminescent devices. Chen, Yonghua; Xia, Yingdong; Smith, Gregory M.; Gu, Yu; Yang, Chuluo; Carroll, David L. // Applied Physics Letters;1/7/2013, Vol. 102 Issue 1, p013307 

    In this work, the emission characteristics of a blue fluorophor poly(9, 9-dioctylfluorene) (PFO) combined with a red emitting dye: Bis(2-methyl-dibenzo[f,h]quinoxaline)(acetylacetonate)iridium (III) [Ir(MDQ)2(acac)], are examined in two different asymmetric white alternating current...

  • LED BLINKS In The Spotlight. Audin, Lindsay // Engineered Systems;May2007, Vol. 24 Issue 5, p32 

    The article discusses the potential and current problems of new light-emitting diodes (LED) light fixtures. According to the author, the efficacy of LED may be boosted to equal that of fluorescents in the future. He asserts that there are few LED designs that are under scrutiny for failing to...

  • 3D imaging with a linear light source. Lunazzi, José J.; Rivera, Noemí I. R. // AIP Conference Proceedings;4/15/2008, Vol. 992 Issue 1, p677 

    In a previous system we showed how the three-dimensionality of an object can be projected and preserved on a diffractive screen, which is just a simple diffractive holographic lens. A transmission object is illuminated with an extended filament of a white light lamp and no additional element is...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics