TITLE

Numerical study of polarization-dependent focusing for a bilayer planar FSS reflective lens at millimeter wavelengths

AUTHOR(S)
Bliznyuk, Natalia; Engheta, Nader
PUB. DATE
March 2004
SOURCE
Microwave & Optical Technology Letters;3/5/2004, Vol. 40 Issue 5, p361
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
In this paper, we numerically analyze the polarization-dependent focusing properties of a planar reflective lens formed by two parallel layers of nonuniform “gangbuster” surfaces (GSs) above a ground plane. Since these GSs consist of superdense arrays of thin finite-length parallel metallic wires, the desired phase patterns on such a lens surface are achieved by adjusting the lengths of these metallic wires for appropriate polarization components. In our analysis, we use the method of moments (MoM) and the transmission-lines analogy, along with the surface-equivalence theorem, to estimate the field intensity in the focal plane. © 2004 Wiley Periodicals, Inc. Microwave Opt Technol Lett 40: 361–365, 2004; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.11382
ACCESSION #
13509347

 

Related Articles

  • Millimeter-wave-detected, millimeter-wave optical polarization spectroscopy. Steeves, Adam H.; Bechtel, Hans A.; Coy, Stephen L.; Field, Robert W. // Journal of Chemical Physics;10/8/2005, Vol. 123 Issue 14, p141102 

    We report a new form of microwave optical double-resonance spectroscopy called millimeter-wave-detected, millimeter-wave optical polarization spectroscopy (mmOPS). In contrast to other forms of polarization spectroscopy, in which the polarization rotation of optical beams is detected, the mmOPS...

  • 35-GHz 0.5-W GaAs pHEMT points the way toward low-cost... McDonald, JoAnn // Electronic Design;12/01/97, Vol. 45 Issue 27, p33 

    Features the pseudomorphic HEMT (pHEMT) monolithic microwave and millimeter wave (MMIC) devices developed by EMCORE in Somerset, New Jersey. Implication of the device performance on MMIC manufacturing costs; Process used in developing the devices; Design of the pHEMT structures.

  • Design and fabrication of a 180° hybrid ring coupler inserted into a slow-wave structure for MMIC applications using dielectric-supported air-gapped microstriplines. Byeong-Ok Lim; Baek-Seok Ko; Tae-Jong Baek; Sung-Chan Kim; Dong-Hoon Shin; Jin-Koo Rhee // Microwave & Optical Technology Letters;12/5/2005, Vol. 47 Issue 5, p440 

    In this paper, we design and fabricate a 180° hybrid ring coupler in order to prove the fabrication possibilities of various passive components, by applying millimeter waves using newly proposed transmission lines, that is, dialectric-supported air-gapped microstriplines (DAMLs). In order to...

  • “Nonresonant” Capture Regime in Microwave Amplifiers. Bandurkin, I. V.; Peskov, N. Yu.; Savilov, A. V. // Radiophysics & Quantum Electronics;Dec2003, Vol. 46 Issue 12, p957 

    We study a new regime of electron-wave interaction in microwave amplifiers and demonstrate its efficiency for a wide class of devices. A mildly relativistic millimeter-wave free-electron maser is calculated as a particular system implementing this regime.

  • MULTI BAND PATCH ANTENNA FOR MILLIMETER-WAVE APPLICATIONS. Gohir, Gurpreet Singh; Shukla, Sant Sharan; Shah, Shalini // Far East Journal of Electronics & Communications;2016 Special Volume, Vol. 3, p153 

    This paper presents a miniaturized millimeter wave patch antenna that is constructed of a single layer of substrate like Rogers RT/duroid 5880 (tm) for millimeter-wave system-on package modules. The proposed antenna is radiating in three bands with a return loss of -19.59dB, -14.20dB, -20.93dB...

  • Design of microstrip to waveguide transition in the W band suitable antenna or integrated circuits connections. Nguyen, B. D.; Migliaccio, C.; Pichot, Ch.; Rolland, Nathalie // Microwave & Optical Technology Letters;12/20/2005, Vol. 47 Issue 6, p518 

    This paper presents a millimeter waveguide-to-microstrip line transition based on E-mode coupling. It uses a standard W-band waveguide and a microstrip line made on alumina substrate. It has been designed for the center frequency of 94 GHz. A back-to-back transition has been done and measured...

  • Microwave/millimeter wave via-only bandpass filters for LTCC applications. Bhargava, Gaurav; Settaluri, Raghu K. // Microwave & Optical Technology Letters;11/5/2005, Vol. 47 Issue 3, p215 

    This paper presents novel via-only bandpass filters for a wide range of microwave/millimeter-wave frequencies. The design is based on rigorous field-theory analysis of a dielectric-loaded inductive-iris waveguide section combined with an impedance-inverter-based filter synthesis to realize...

  • A high-gain 18–32 GHz MMIC driver amplifier for LMDS application. D'Agostino, S.; Betti-Berrutto, A.; Poledrelli, C.; Khandavalli, C.; Satoh, T.; Yokoyama, T.; Kuroda, S.; Fukaya, J. // Microwave & Optical Technology Letters;2/20/2000, Vol. 24 Issue 4, p237 

    A high-gain GaAs MMIC driver amplifier for local multipoint distribution service application delivering 32 dBm output power, with associated gain better than 19 dB, has been developed for high-volume production. The MMIC realization consists of a four-stage amplifier integrated in a 2.2×1.5...

  • Millimetre-wave end-fired antenna array for active 3D holographic imaging system. Weihai Fang; Peng Fei; Feng Nian // Electronics Letters;2/27/2014, Vol. 50 Issue 5, p1 

    A compact Ka-band (26.5-40 GHz) dielectric rod end-fired antenna array for the three-dimensional (3D) active holographic imaging system is presented. Without horn shape feeding, the new antenna array is specially designed with characteristics such as small size, high gain, good radiation...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics