TITLE

Plastic fantastic

AUTHOR(S)
Excell, Jon
PUB. DATE
June 2004
SOURCE
Engineer (00137758);6/11/2004, Vol. 293 Issue 7653, p33
SOURCE TYPE
Periodical
DOC. TYPE
Article
ABSTRACT
No abstract available.
ACCESSION #
13492273

 

Related Articles

  • Tall order for 15ml.  // Packaging Magazine;9/8/2005, Vol. 8 Issue 16, p12 

    Reports that Precise Plastics extended its range of miniature polyethylene terephthalate (PET) pump spray bottles to fulfil requests for a small container which was as tall as possible at 15 milliliters. Injection blow-molding of the bottles; Printing and decorating possibilities.

  • How to Address Uneven Wall Thickness in Stretch-Blow Molding. Brandau, Ottmar // Plastics Technology;Dec2014, Vol. 60 Issue 12, p32 

    The article addresses uneven wall thickness in polyethylene terephthalate (PET) bottle in stretch-blow molding. It discusses the self-leveling trait of preform PET as it applies to stretching. It offers problems and solutions to uneven wall thickness including off-center gate, uneven heating or...

  • MOLD DEHUMIDIFYING Close-Up. Knights, Mikell // Plastics Technology;Jul98, Vol. 44 Issue 7, p44 

    Discusses how to avoid mold sweating in polyethylene terephthalate (PET) preform molding. Option chosen by injection molders of PET preforms for stretch-blow molded bottles to prevent condensation on their molds; Cause of mold sweating; Various ways to prevent mold sweating; Effect of mold...

  • PET.  // Plastics News;5/29/2006, Vol. 18 Issue 13, p19 

    The article reports that Husky Injection Molding Systems Ltd. has introduced a wide range of bottle production systems, including HyPET, Index and IndexSB.

  • EXPERIMENTAL TECHNIQUES IN OPTIMIZATION OF THE PROCESS OF INJECTION MOLDING OF THERMOPLASTICS -- AFTER-SHRINKAGE OF MOLDINGS. Bogucki, Marcin; Plaska, Stanislaw; Staczek, Pawel // Polimery;2003, Vol. 48 Issue 10, p714 

    Experimental presentation of the problem of injection molding of thermoplastics (low density PE) optimization, using injection molding machines of one pressure degree and constant injection rate. The two-level fractional factorial design and the method of steepest descent, being together a...

  • New Process Combinations Extend Injection Molding's Capabilities. Knights, Mikell // Plastics Technology;Sep2004, Vol. 50 Issue 9, p46 

    Presents information on the Injection Transfer Molding (ITM) process introduced during the 22nd Colloquium held by the Institute of Plastics Processing (IKV) in Aachen, Germany. Features of the ITM process; Limitations of the conventional hot-runner injection molding according to Tobias...

  • Water Injection Molding. Knights, Mikell // Plastics Technology;Sep2005, Vol. 51 Issue 9, p54 

    Focuses on water injection molding of plastics. Description of water injection technology (WIT); Characteristics of WIT; Uses of WIT; Materials for WIT.

  • Hourly Rates Rose in First Half. Naitove, Matthew H. // Plastics Technology;Oct2007, Vol. 53 Issue 10, p91 

    The article discusses the findings of a survey about custom injection molding machine-hour rates for the December 2006 to June 2007 period. The semi-annual survey of 88 molders in the U.S. reveals that machine-hour rates increased by one percent during the said period. Seventeen percent of the...

  • Film insert molding. Phadke, N. L. // Popular Plastics & Packaging;Apr2008, Vol. 53 Issue 4, p29 

    The article focuses on film insert molding (FIM), a process of applying printed clear effective picture to injection molded plastic parts. It says that FIM can be used to apply clear scratch-resistant hardcoats, text, logos and pictures in any color or combination of colors to plastic parts...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics