TITLE

Imaging of ECR plasmas with a pinhole x-ray camera

AUTHOR(S)
Biri, S.; Valek, A.; Suta, T.; Takács, E.; Szabó, Cs; Hudson, L. T.; Radics, B.; Imrek, J.; Juhász, B.; Pálinkás, J.
PUB. DATE
May 2004
SOURCE
Review of Scientific Instruments;May2004, Vol. 75 Issue 5, p1420
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
X-ray plasma images were made at the 14.5 GHz electron cyclotron resonance ion source of ATOMKI using a pinhole and a high resolution CCD camera. This method has good spatial resolution as well as the capability of postprocessed energy filtering of the images. During the measurements low and high charge state Ar, Xe, and Fe plasmas were produced with simultaneous beam extraction. Full-size and selected region images were recorded and analyzed. Full-size x-ray images show the spatial positions of different sources of x rays (bremsstrahlung, characteristic lines of plasma and wall ions) within low-charged ECRIS plasmas. Images of selected plasma regions (extraction slit, magnet pole, magnet gap) offer a better understanding of the effect of important tuning parameters (bias disk voltage, gas mixing, microwave power, magnetic field strength, etc.) commonly used to produce highly charged plasmas and beams. © 2004 American Institute of Physics.
ACCESSION #
13154608

 

Related Articles

  • A compact electron cyclotron resonance proton ion source. Boukari, F.; Wartski, L.; Roy, V.; Schwebel, C.; Coste, Ph.; Aubert, J. // Review of Scientific Instruments;Mar96, Vol. 67 Issue 3, p994 

    Reports on the development of a compact electron cyclotron resonance (ECR) ion source. Performance of the ECR ion source; Positive hydrogen ion proportion versus plasma parameters; Diameter of the ion beam; Range of the microwave power of the ion beam.

  • Solid material evaporation into an electron cyclotron resonance source by laser ablation. Harkewicz, R.; Stacy, J.; Greene, J.; Pardo, R. C. // Review of Scientific Instruments;Apr94, Vol. 65 Issue 4, p1104 

    In an effort to explore new methods of producing ion beams from solid materials, a laser-ablation technique for evaporating materials directly into an electron cyclotron resonance (ECR) ion source plasma was developed. A pulsed NdYaG laser with approximately 25 W average power and peak power...

  • Multi-Frequency Microwaves Plasma Production for Active Profile Control of Ion Beams on a Large Bore ECR Ion Source with Permanent Magnets. Sakamoto, Naoki; Kato, Yushi; Kiriyama, Ryutaro; Takenaka, Tomoya; Sato, Fuminobu; Iida, Toshiyuki // AIP Conference Proceedings;1/7/2011, Vol. 1321 Issue 1, p464 

    A new concept on magnetic field of plasma production and confinement by using permanent magnets, i.e. cylindrically comb-shaped magnets, has been proposed to enhance efficiency of an electron cyclotron resonance (ECR) plasma for broad and dense ion beam source under the low pressure and also the...

  • Multigan®: First experimental results. Maunoury, L.; Pacquet, J. Y.; Baret, P.; Donzel, X.; Dubois, M.; Gaubert, G.; Lehérissier, P.; Leroy, R.; Michel, M.; Villarit, A. C. C. // Review of Scientific Instruments;Feb2012, Vol. 83 Issue 2, p02A338 

    A new design of a multicharged ion source based on the MONO1000 ECRIS has been presented at the last ECR ion source (ECRIS) Workshop 2010. [L. Maunoury et al., in Proceedings of the XIXth International Workshop on ECR Ion Sources, Grenoble, France, 23-26 August 2010] This source has not only two...

  • The Texas A&M ECR Ion Sources: a Status Report. May, D. P.; Derrig, G. J.; Abegglen, F. P.; Peeler, H. // AIP Conference Proceedings;2005, Vol. 749 Issue 1, p196 

    The Texas A&M Cyclotron Institute has two ECR ion sources, ECR1 and ECR2. ECR1 operates at 6.4 GHz and has high-B containment fields. ECR2 operates at 14.5 GHz. Both plasma chambers are aluminum, are large with similar dimensions and incorporate biased disks on the injection ends. The large...

  • Extraction of space-charge-dominated ion beams from an ECR ion source: Theory and simulation. Alton, G. D.; Bilheux, H. // Review of Scientific Instruments;May2004, Vol. 75 Issue 5, p1431 

    Extraction of high quality space-charge-dominated ion beams from plasma ion sources constitutes an optimization problem centered about finding an optimal concave plasma emission boundary that minimizes half-angular divergence for a given charge state, independent of the presence or lack thereof...

  • New superconducting electron cyclotron resonance ion source for RIKEN RI beam factory project. Nakagawa, T.; Kidera, M.; Higurashi, Y.; Ohonishi, J.; Goto, A.; Yano, Y. // Review of Scientific Instruments;Feb2008, Vol. 79 Issue 2, p02A327 

    For RIKEN radio isotope beam project, we started to construct the new superconducting electron cyclotron resonance ion source (SC-ECRIS), which has an operational frequency of 28 GHz, in 2007. The main feature of this ion source is that we can produce large size of resonance zone with six sets...

  • Future carbon beams at SPIRAL1 facility: Which method is the most efficient? Maunoury, L.; Delahaye, P.; Angot, J.; Dubois, M.; Dupuis, M.; Frigot, R.; Grinyer, J.; Jardin, P.; Leboucher, C.; Lamy, T. // Review of Scientific Instruments;2014, Vol. 85 Issue 2, p1 

    Compared to in-flight facilities, Isotope Separator On-Line ones can in principle produce significantly higher radioactive ion beam intensities. On the other hand, they have to cope with delays for the release and ionization which make the production of short-lived isotopes ion beams of reactive...

  • Reduction of the carbon contamination of an electron cyclotron resonance ion source. Tarvainen, O.; Suominen, P.; Koivisto, H.; Pitkänen, I. // Review of Scientific Instruments;May2004, Vol. 75 Issue 5, p1523 

    The MIVOC method can be used for the production of metal ion beams with an electron cyclotron resonance ion source. The drawback of the method is the inevitable carbon contamination of the plasma chamber, which lowers the performance of the ion source. After the production of metal ion beams,...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics