TITLE

Coercivity enhancements by high-magnetic-field annealing in sintered Nd–Fe–B magnets

AUTHOR(S)
Kato, Hiroaki; Miyazaki, Terunobu; Sagawa, Masato; Koyama, Keiichi
PUB. DATE
May 2004
SOURCE
Applied Physics Letters;5/24/2004, Vol. 84 Issue 21, p4230
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
An influence of a high-field annealing on the magnetic properties was investigated in sintered Nd–Fe–B magnets. When the sample B, containing 0.32 at. % Al, was annealed at Ta=550 °C under a magnetic field of Ha=140 kOe and then cooled without field, the coercivity Hc increased by 25% with respect to the control sample annealed at zero field. As for the sample C, containing both Cu 0.13 at. % and Al 0.32 at. %, higher Hc values were obtained when it was annealed at Ta=550 °C and the field of Ha=140 kOe was kept applied down to the room temperature. These results were discussed in terms of a field-induced change in interface matching between Nd2Fe14B and intergranular phases. © 2004 American Institute of Physics.
ACCESSION #
13077521

 

Related Articles

  • Electromagnetic properties of microwave sintered ferromagnetic-ferroelectric composites for application in low temperature co-fired ceramic devices. Qinghui, Yang; Huaiwu, Zhang; Qiye, Wen; Yingli, Liu // Journal of Applied Physics;Apr2011, Vol. 109 Issue 7, p07D733 

    In this paper, microwave sintering (MS) technology has been applied in the preparation of ferromagnetic-ferroelectric composites. Several kinds of (Ni0.3Zn0.6Cu0.1)Fe2O4 (NiCuZn) ferrite with different contents of BaTiO3(BT) have been fabricated by MS technology. We found that the sintering time...

  • Dysprosium-saving improvement of coercivity in Nd-Fe-B sintered magnets by Dy2S3 additions. Gabay, A. M.; Marinescu, M.; Li, W. F.; Liu, J. F.; Hadjipanayis, G. C. // Journal of Applied Physics;Apr2011, Vol. 109 Issue 8, p083916 

    Dysprosium-added sintered magnets were prepared from blends of Nd15.5(Fe,Co,Ga)78.2B6.3 and Dy2S3 powders; their microstructure and magnetic properties were compared to those of the magnets made with Dy2O3 additions or from single (Nd,Dy)-(Fe,Co,Ga)-B alloys. The addition of Dy2S3 leads to...

  • Companies work on laser-sintered egg. whitel // MWP (Online Edition);10/ 4/2012, p114 

    The article reports that three companies have collaborated in the production of a highly intricate laser-sintered plastic egg.

  • Silverstone success for DMLS. whitel // MWP (Online Edition);10/ 4/2012, p175 

    The article reports that Laser-sintered titanium parts boost race car's performance in Formula Student championship.

  • Sintered magnetic cores of high Bs Fe84.3Si4B8P3Cu0.7 nano-crystalline alloy with a lamellar microstructure. Yan Zhang; Sharma, Parmanand; Akihiro Makino // Journal of Applied Physics;2014, Vol. 115 Issue 17, p17A322-1 

    Fabrication of bulk cores of nano-crystalline Fe84.3Si4B8P3Cu0.7 alloy with a lamellar type of microstructure is reported. Amorphous ribbon flakes of size ∼1.0-2.0mm were compacted in the bulk form by spark plasma sintering technique at different sintering temperatures. High density...

  • Synthesis, dielectric, and hysteresis behaviour of Ba(Nb0.2Ti0.8)O3 ceramics and their solid solutions with BaZrO3. Sulepetkar, S. T.; Raibagkar, Ravindra L. // Journal of Materials Science: Materials in Electronics;Dec2007, Vol. 18 Issue 12, p1247 

    Solid state reaction technique was employed to synthesize Ba(Nb0.2Ti0.8)O3 [BNT], and 0.9Ba(Nb0.2Ti0.8)O3 + 0.1BaZrO3 [BNT + BZ] samples. Sintered pellets were investigated for its dielectric (εr and tanδ) properties in the temperature range 100 K–380 K and in the frequency range of...

  • Influence of Radiation-Thermal Treatment on the Phase Composition and Structural Parameters of the SHS Product Based on W-Type Hexaferrite. Naiden, E.; Minin, R.; Itin, V.; Zhuravlev, V. // Russian Physics Journal;Nov2013, Vol. 56 Issue 6, p674 

    The phase composition, structural parameters, and main magnetic characteristics of BaCoZnFeO hexaferrites obtained by the method of self-propagation high-temperature synthesis in combination with mechanochemical activation and radiation-thermal post-sintering are investigated. It is established...

  • Fractal study for the fractured surface of Nd-Fe-B permanent magnets. Zhu, Minggang; Li, Wei; Fang, Yikun; Zhang, Wenchen; Zhao, Rui; Wang, Jingdai; Li, Anhua; Feng, Haibo; Guo, Zhaohui; Zhou, Mingge; Li, Yanfeng // Journal of Applied Physics;Apr2011, Vol. 109 Issue 7, p07A706 

    Fractal study was used to the analysis of the fractured surface of commercial N50-type Nd-Fe-B sintered magnets. The strain-stress properties of the specimens indicate that the elastic and plastic deformations occur simultaneously during intergranual cracking. The microfractography of the...

  • LUBRICANTS FOR HIGH-DENSITY COMPACTION AT MODERATE TEMPERATURES. Azzi, Lhoucine; Thomas, Yannig; St-Laurent, Sylvain // International Journal of Powder Metallurgy;Nov/Dec2007, Vol. 43 Issue 6, p39 

    The nature of the lubricant and the conditions of compaction, in particular the temperature and pressure, affect the densification of powder metallurgy (PM) powder mixes. While the effect of pressure on densification is straightforward, the effect of temperature is more complex. Depending on the...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics