TITLE

Methodology for optimizing viewing characteristics of top-emitting organic light-emitting devices

AUTHOR(S)
Chung-Chih Wu; Chun-Liang Lin; Ping-Yuan Hsieh; Huo-Hsien Chiang
PUB. DATE
May 2004
SOURCE
Applied Physics Letters;5/17/2004, Vol. 84 Issue 20, p3966
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Top-emitting organic light-emitting devices (OLEDs) have a few technical merits for active-matrix OLED displays. Generally stronger microcavity effects inherent in top-emitting OLEDs, however, complicate optimization of device efficiency and other viewing characteristics. In this letter, using the rigorous classical electromagnetic model, we analyze emission characteristics of top-emitting OLEDs as a function of device structures. From the comprehensive analysis, trends in the dependence of emission characteristics on device structures are extracted, and accordingly, a general methodology for optimizing viewing characteristics of top-emitting OLEDs for display applications is suggested. The effectiveness of the analysis and the methodology is confirmed by experimental results.
ACCESSION #
13029234

 

Related Articles

  • Temperature and electric-field dependences of hole mobility in light-emitting diodes based on poly [2-methoxy-5-(2-ethylhexoxy)-1,4-phenylene vinylene]. Kumar, Amit; Bhatnagar, P. K.; Mathur, P. C.; Husain, M.; Sengupta, Sandip; Kumar, Jayant // Journal of Applied Physics;7/15/2005, Vol. 98 Issue 2, p024502 

    The current-voltage characteristics of poly [2-methoxy-5-(2-ethylhexoxy)-1,4-phenylene vinylene] (MEH-PPV)-based hole-only light-emitting diodes are measured as a function of temperature. The hole current is found to be space-charge limited, providing a direct measure of the mobility as a...

  • Highly efficient and stable white light organic light-emitting devices. Lin, Mei-Fang; Wang, Lei; Wong, Wai-Kwok; Cheah, Kok-Wai; TAM, Hoi-Lam; Lee, Meng-Ting; Ho, Meng-Huan; Chen, Chin H. // Applied Physics Letters;8/13/2007, Vol. 91 Issue 7, p073517 

    A highly efficient two-element white light organic light-emitting device with a sky blue dopant BUBD-1 and a yellow dopant TBRb was fabricated. The device achieved an electroluminescence efficiency of 17.1 cd/A and 7.9 lm/W at 20 mA/cm2. From 112 to 32 010 nits, the CIEx,y coordinates variation...

  • High-efficiency stacked white organic light-emitting diodes. Lee, Tae-Woo; Noh, Taeyong; Choi, Byoung-Ki; Kim, Myeong-Suk; Shin, Dong Woo; Kido, Junji // Applied Physics Letters;1/28/2008, Vol. 92 Issue 4, p043301 

    We report efficient tandem white organic light-emitting diodes (WOLEDs) by using bathocuproine:Cs2CO3/MoO3 as an effective interconnecting layer. We utilized two primary colors of sky blue and orange fluorescent emitters to obtain efficient white electroluminescence. Although single WOLEDs using...

  • Top 3 Trends in Colored LED Applications.  // Buildings;May2014, Vol. 108 Issue 5, p14 

    The article reports on top three trends in the use of colored light-emitting diode (LED) as of May 2014, including upgrading of efficiency, the ability to change lighting as required, and the shift to systems thinking rather than by individual components.

  • True Colors. Daniello, Vincent // Yachting;Jan2011, Vol. 209 Issue 1, p74 

    The article focuses on the developments in light emitting diodes (LEDs), will last 50,00 hours, that make several yachtsmen rethink the lighting of their vessels.

  • Enhanced luminescence of Y3Al5O12:Ce3+ nanophosphor for white light-emitting diodes. Haranath, D.; Chander, Harish; Sharma, Pooja; Singh, Sukhvir // Applied Physics Letters;10/23/2006, Vol. 89 Issue 17, p173118 

    Results pertaining to the development of highly dispersible stand-alone particles of Ce3+-doped Y3Al5O12 nanophosphor and their luminescence are presented. The yellow light-emitting nanophosphor was produced as a result of a single-step auto-combustion process, which requires no auxiliary...

  • Demonstration of a semipolar [formula] InGaN/GaN green light emitting diode. Sharma, R.; Pattison, P. M.; Masui, H.; Farrell, R. M.; Baker, T. J.; Haskell, B. A.; Wu, F.; DenBaars, S. P.; Speck, J. S.; Nakamura, S. // Applied Physics Letters;12/5/2005, Vol. 87 Issue 23, p231110 

    We demonstrate the growth and fabrication of a semipolar (1013) InGaN/GaN green (∼525 nm) light emitting diode (LED). The fabricated devices demonstrated a low turn-on voltage of 3.2 V and a series resistance of 14.3 Ω. Electroluminescence measurements on the semipolar LED yielded a...

  • Effect of hole mobilities through the emissive layer on space charge limited currents of phosphorescent organic light-emitting diodes. Luo, Yang; Duan, Yu; Chen, Ping; Zhao, Yi // Optical & Quantum Electronics;Feb2015, Vol. 47 Issue 2, p375 

    In this letter, we used space charge limited current measurements to evaluate the hole mobilities of candidate host materials with or without doped phosphorescent guests through a study of 'hole only' devices. We found different impacts to hole mobility in each material when the dopant...

  • Integration of organic light-emitting diode and organic transistor via a tandem structure. Chu, Chih-Wei; Chen, Chieh-Wei; Li, Sheng-Han; Wu, Elbert Hsing-En; Yang, Yang // Applied Physics Letters;6/20/2005, Vol. 86 Issue 25, p253503 

    A high-performance organic active matrix pixel was fabricated by using a metal oxide (V2O5) coupling layer that effectively integrates an organic light-emitting diode (OLED) on top of an organic field-effect transistor (OFET). The field-effect mobility of the OFET approached 0.5 cm2 V-1 s-1 and...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics