TITLE

Thermophysical properties of a highly superheated and undercooled Ni–Si alloy melt

AUTHOR(S)
Wang, H.P.; Cao, C.D.; Wei, B.
PUB. DATE
May 2004
SOURCE
Applied Physics Letters;5/17/2004, Vol. 84 Issue 20, p4062
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The surface tension of superheated and undercooled liquid Ni-5 wt % Si alloy was measured by an electromagnetic oscillating drop method over a wide temperature range from 1417 to 1994 K. The maximum undercooling of 206 K (0.13 TL) was achieved. The surface tension of liquid Ni-5 wt % Si alloy is 1.697 Nm-1 at the liquidus temperature 1623 K, and its temperature coefficient is -3.97 × 10-4 Nm-1K-1. On the basis of the experimental data of surface tension, the other thermophysical properties such as the viscosity, the solute diffusion coefficient, and the density of liquid Ni-5 wt % Si alloy were also derived.
ACCESSION #
13029202

 

Related Articles

  • Low-loss ridge waveguides on lithium niobate fabricated by local diffusion doping with titanium. Hu, H.; Ricken, R.; Sohler, W. // Applied Physics B: Lasers & Optics;Mar2010, Vol. 98 Issue 4, p677 

    The development of a novel self-aligned photolithographic process is reported enabling selective Ti-deposition on the surface of wet etched ridges on lithium niobate. Thus local diffusion doping of the ridges becomes possible to fabricate optical waveguides. They have surprisingly low...

  • Constant-pressure and constant-surface tension simulations in dissipative particle dynamics. Jakobsen, Ask F. // Journal of Chemical Physics;3/22/2005, Vol. 122 Issue 12, p124901 

    We present a method for constant-pressure and constant-surface tension simulations in dissipative particle dynamics using a Langevin piston approach. We demonstrate that the corresponding equations of motion lead to the relevant ensembles and propose an appropriate scheme of integration. After...

  • The moving contact line with weak viscosity effects - an application and evaluation of Shikhmurzaev�s model. Lindner-Silwester, T.; Schneider, W. // Acta Mechanica;May2005, Vol. 176 Issue 3/4, p245 

    A recently developed model of dynamic wetting (Shikhmurzaev [1]) is applied to the spreading of a liquid over a smooth solid surface in the limit of weak viscosity effects. In this model, experimentally observed deviations of the dynamic contact angle from the static one are attributed to...

  • Effects of structural and chemical anisotropy of nanostructures on droplet spreading on a two dimensional wicking surface. Chang Quan Lai; Trong Thi Mai; Zheng, H.; Wen Zheng; Lee, P. S.; K. C.6Leong; Chengkuo Lee; Choi, W. K. // Journal of Applied Physics;2014, Vol. 116 Issue 3, p034907-1 

    When a liquid droplet is deposited onto an array of nanostructures, a situation may arise in which the liquid wicks into the space between the nanostructures surrounding the droplet, forming a thin film that advances ahead of the droplet edge. This causes the droplet to effectively spread on a...

  • Fingering instability of a retracting solid film edge. Wanxi Kan; Harris Wong // Journal of Applied Physics;2/15/2005, Vol. 97 Issue 4, p043515 

    A thin gold film under annealing on a silica substrate can develop “fingers” at the perimeter of the film. The perimeter retracts to leave behind longer fingers, which eventually pinch off to reduce the surface energy of the system. New fingers then form at the film edge and the...

  • Formation of rare-earth oxide doped silicon by spark processing. St. John, John V.; Coffer, Jeffrey L. // Applied Physics Letters;6/10/1996, Vol. 68 Issue 24, p3416 

    Examines the use of a spark processing method for forming europium oxide and erbium oxide doped silicon (Si) surfaces. Use of a high-energy direct current spark to convert europium and erbium salts to the corresponding oxide phase; Substrate characteristics observed through scanning electron...

  • Thermal capillary waves relaxing on atomically thin liquid films. Willis, A. M.; Freund, J. B. // Physics of Fluids;Feb2010, Vol. 22 Issue 2, p022002 

    Atomistic simulations are used to investigate the relaxation dynamics of thermal capillary waves on thin flat liquid films. Short Lennard-Jones polymers (n=2, 4, and 8) model the liquid in films of thickness 6σ to 96σ, where σ is the Lennard-Jones atomic length-scale parameter. Assuming...

  • A new method for simultaneous measurement of surface tension and viscosity. Fujii, H.; Matsumoto, T.; Ueda, T.; Nogi, K. // Journal of Materials Science;May2005, Vol. 40 Issue 9/10, p2161 

    A new method for the simultaneous mesurement of the surface tension and viscosity of a liquid was developed by combining the principle of the oscillating drop method with a microgravity environment. This new method can be used in an ordinary laboratory. A droplet falls for 1.5 m in approximately...

  • Comment on ‘‘Fluid wetting on molecularly rough surfaces’’ [J. Chem. Phys. 103, 8201 (1995)]. Nijmeijer, M. J. P.; Bruin, C. // Journal of Chemical Physics;9/15/1996, Vol. 105 Issue 11, p4889 

    In molecular dynamics (MD) simulations of drying and wetting by a fluid on both molecular rough and smooth substrates, Tang and Harris calculate the surface tension of the substrate-fluid interface incorrectly. Their microscopic expresesion for the surface tension contains a contribution which,...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics