TITLE

Methodology for interference analysis using electromagnetic topology techniques

AUTHOR(S)
Kirawanich, Phumin; Gunda, Rahul; Kranthi, Nakka S.; Kroenung, Jeffery C.; Islam, N. E.
PUB. DATE
April 2004
SOURCE
Applied Physics Letters;4/12/2004, Vol. 84 Issue 15, p2949
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
For simulation codes based on the electromagnetic topology theory, a method to characterize electromagnetic interference and interactions between an external source and internal circuitry of a semi-shielded system is described. Simulation results based on this technique compare well with previously measured data. Analysis also shows that the high-frequency resonances on the cable voltage and current depend on the length of the cable and its termination impedances. © 2004 American Institute of Physics.
ACCESSION #
12754082

 

Related Articles

  • NEC in the Facility.  // Electrical Construction & Maintenance Exclusive Insight;2/14/2012, p4 

    The article provides important NEC concepts by illustrating certain scenarios and walking through example calculations of motor loads such as the proper usage of 90 degree centigrade column of the ampacity tables and exposure of cable through a space heated due to steam pipes.

  • Noise Problems for Broadcast and MF/HF Receivers. Wolfgang, Larry D. // QST;Mar2013, Vol. 97 Issue 3, p59 

    A personal narrative is presented which explores the author's experience of solving an electromagnetic interference (EMI) problem for his medium frequency/high frequency (MF/HF) broadcast receiver.

  • Design and Application of Full Digital Control System for LLC Multiresonant Converter.  // Electronics & Electrical Engineering;2010, Issue 106, p75 

    No abstract available.

  • A Concise Interference Model for Wireless Sensor Networks using Directional Antennas. Staniec, K.; Miedzinski, B. // Electronics & Electrical Engineering;2012, Issue 122, p59 

    The paper focuses on the issue of intra-network electromagnetic interference in wireless sensor networks where multiple sensor nodes are located on an open-space area at random locations. It is assumed that the topology is planar and reliable (i.e. at least two alternative paths exist for each...

  • More Power Over The Same Towers.  // Popular Mechanics;Mar2003, Vol. 180 Issue 3, p20 

    Reports that a type of cable that doubles the amount of energy that can be carried by high-voltage powerlines may solve one of the most pressing problems faced by the U.S. Details of a cable being tested by the U.S. Department of Energy and 3M Co.; Composition of the cable; Place where the...

  • IMPACT OF ELECTROMAGNETIC LOSSES IN CLOSED TWO-COMPONENT MAGNETIC SHIELDS ON THE AMPACITY OF UNDERGROUND POWER CABLES. del Pino-López, Juan Carlos; Cruz-Romero, Pedro; Serrano-Iribarnegaray, Luis // Progress in Electromagnetics Research;2013, Vol. 135, p601 

    In this paper two typical arrangements of underground single-core high voltage three-phase power cables (flat and trefoil protected by PVC pipes) inside a closed shield of three different materials (low-carbon steel, non-oriented grain steel and aluminium) are analysed. The shield has two...

  • Wireless PXI? Quinnell, Richard A. // Test & Measurement World;Sep2007, Vol. 27 Issue 8, p62 

    The author reflects on the wireless PCI Extensions for Instrumentation. He stresses that the elimination of wires on communication channel can help prevent ground loops, inductively coupled electromagnetic interference, and common-mode noise. This technology will also provide high-voltage...

  • EMI woes and cures. Chenier, Glen // EDN;3/1/2007, Vol. 52 Issue 5, p34 

    The author offers his views on electromagnetic-interference (EMI). According to him, his first exposure to EMI measurement was in trying to make his multiport, unshielded-twisted-pair Ethernet-hub card. He notes that the usual measurement practice for a new product release is to set up the...

  • European standards shine spotlight on EMI. Schofield, Julie Anne // Design News;9/25/95, Vol. 51 Issue 18, p58 

    Discusses electromagnetic interference (EMI) and the European standards set for both emissions and susceptibility emissions for electronic equipments. Electromagnetic compatibility (EMC) standards; Testing facilities such as Instrument Specialties' World Compliance Center (WCC); Testing for...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics