Goldman, Michael
February 2004
Millimeter;Feb2004, Vol. 32 Issue 2, p15
Trade Publication
Focuses on the filming of the IMAX film "NASCAR 3D: The Imax Experience." Operation of an IMAX 3D camera to capture up-close footage of professional racecars; Major logistical problems for the camera crew of the film; Struggle of the crew to manipulate two IMAX 3D cameras that weigh close to 300 lbs. each.


Related Articles

  • High Speed Cinematography. Hadland, John // British Kinematography, Sound & Television;Oct1969, Vol. 51 Issue 10, p360 

    Most normal 35 mm Motion Picture cameras are capable of operation at speeds of up to 80 pps without major modification. Above, this speed special care has to be taken to balance the intermittent mechanism and ensure registration of the pictures. Special 35 mm High Speed Cameras manufactured by...

  • AR Rig Facilitates Smooth Movement. Calhoun, John // American Cinematographer;Nov2005, Vol. 86 Issue 11, p52 

    Describes the utilization of the MK-V Alien Revolution (AR) camera-stabilization system in the filming of the motion picture "Rent" in the U.S. Capability of the AR rig to offer the height ability of a small jib arm; Ability of the equipment to move between spaces and people; Drawbacks...

  • Can you identify this camera?  // BKSTS Journal;Feb1979, Vol. 61 Issue 2, p64 

    The article seeks the idea of the readers in identifying an old wooden-cased 35mm motion-picture camera. It measures 9 inches in height and 9 inches in width and the main portion of the body is 9 inches wide. In addition, the body of the camera is hinged at the right-hand side with a triple-claw...

  • Ericson on the use of Super 16 for 16:9 programmes.  // Image Technology;Sep1993, Vol. 75 Issue 7, p164 

    The article discusses how the Swedish cinematographer and protagonist, Rune Ericson develop the use of the Super 16 for widescreen programs and features. Ericson began tests and development supported by the Filmeteknik laboratory and the Swedish Film Institute Research Foundation and found out...

  • Lenses for Super 16.  // Image Technology;Sep1993, Vol. 75 Issue 7, p166 

    The article features a wide range of lenses used for Super 16 on both the Arriflex 16mm and Aaton 16mm cameras. It explains that the 10-30mm T1.5 Cooke Varokinetal is not a current lens and was originally produced as a 35mm lens and subsequently modified for use on 16mm cameras. Many of these...

  • A New Professional Through-The-Lens CdS Exposure Control System with Optical Data Input for the Arriflex 16 BL Camera. Kaestner, Erich; Bergmann, Horst // British Kinematography, Sound & Television;Sep1970, Vol. 52 Issue 9, p260 

    The article describes a through-the-lens (TTL) exposure control system for a motion picture camera. It identifies the advantages derived from the inclusion of individual parameters between object and film in TTL measurements. It summarizes the basic requirements for the solution of the problems...

  • Movie tech whiz DiGiulio dies. Crabtree, Sheigh // Hollywood Reporter -- International Edition;6/8/2004, Vol. 384 Issue 11, p4 

    Edmund DiGiulio, who developed the Steadicam, worked closely with director Stanley Kubrick and was one of the motion picture industry's most influential technological innovators, has died. DiGiulio died Friday at his home in Malibu after a long battle with congestive heart disease. He applied...

  • High-Speed Photography for Motion Picture and Television. Rendell, John // British Kinematography, Sound & Television;Mar1970, Vol. 52 Issue 3, p56 

    This article reports on high-speed photography for motion picture and television. High speed photography started in the late 19th century when professor Muybridge took his set of animal pictures. Eventually, the motion picture camera arrived and film producers realized the potential of speeding...

  • CamCutter - Pictures Direct from Lens to Disk. Fasciano, Peter // Image Technology;Oct1996, Vol. 78 Issue 9, p16 

    The article focuses on the technological advances in the British cinematography with the development of a handheld teleproduction unit called CamCutter. CamCutter allows videographer to instantly view and verify any recorded shots with no shuttle delay through any videotape. Also, the CamCutter...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics