TITLE

Effect of crystallinity on the transport properties of Nd[sub 0.67]Sr[sub 0.33]MnO[sub 3] thin films

AUTHOR(S)
Wang, H.; Zhang, X.; Hundley, M.F.; Thompson, J.D.; Gibbons, B.J.; Lin, Y.; Arendt, P.N.; Foltyn, S.R.; Jia, Q.X.; MacManus-Driscoll, J.L.
PUB. DATE
February 2004
SOURCE
Applied Physics Letters;2/16/2004, Vol. 84 Issue 7, p1147
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Highly crystalline Nd[sub 0.67]Sr[sub 0.33]MnO[sub 3] (NSMO) thin films were grown on (001) LaAlO[sub 3] (LAO) substrates using pulsed-laser deposition. By studying the microstructural properties of NSMO using x-ray diffraction (XRD), transmission electron microscopy (TEM) and high resolution TEM, we have found that high degree crystallinity leads to improved transport properties such as smaller resistivities at both peak and room temperatures. A peak temperature of 187 K has been observed from a resistivity-temperature measurement, and around 200 K from a magnetization measurement. © 2004 American Institute of Physics.
ACCESSION #
12202319

 

Related Articles

  • Unipolar resistive switching behavior of amorphous gallium oxide thin films for nonvolatile memory applications. Guo, D. Y.; Wu, Z. P.; An, Y. H.; Li, P. G.; Wang, P. C.; Chu, X. L.; Guo, X. C.; Zhi, Y. S.; Lei, M.; Li, L. H.; Tang, W. H. // Applied Physics Letters;1/26/2015, Vol. 106 Issue 4, p1 

    Amorphous gallium oxide thin film with heavy oxygen deficiency was deposited on Pt/Ti/SiO2/Si substrate by pulsed laser deposition in order to explore the resistive switching behavior of the Pt/ Ga2O3-x/Pt sandwich structure. A well unipolar resistive switching behavior was obtained in this...

  • Enhanced electrical properties of SrTiO3 thin films grown by atomic layer deposition at high temperature for dynamic random access memory applications. Sang Woon Lee; Oh Seong Kwon; Jeong Hwan Han; Cheol Seong Hwang // Applied Physics Letters;6/2/2008, Vol. 92 Issue 22, p222903 

    SrTiO3 (STO) thin films were deposited at 370 °C by atomic layer deposition using H2O as the oxidant, and Ti(O–iPr)2(thd)2 and Sr(thd)2 as Ti, and Sr precursors, respectively. Denser STO films were produced at this deposition temperature. The saturated growth rate was 0.15 Å/cycle....

  • Strain effects and microstructure of epitaxial manganite thin films and heterostructures. Wiedenhorst, B.; Hofener, C. // Applied Physics Letters;6/14/1999, Vol. 74 Issue 24, p3636 

    Describes the growth of epitaxial La[sub 2/3]Sr[sub 1/3]MnO[sub 3] and La[sub 2/3]Ba[sub 1/3]MnO[sub 3] thin films as well as La[sub 2/3]Ba[sub 1/3]MnO[sub 3]/SrTiO[sub 3] heterostructures by pulsed-laser deposition. Analysis of the manganite thin films' microstructure by x-ray diffraction and...

  • Orientation dependence of ferroelectricity in pulsed-laser-deposited epitaxial bismuth-layered perovskite thin films. Pignolet, A.; Schäfer, C.; Satyalakshmi, K.M.; Harnagea, C.; Hesse, D.; Gösele, U. // Applied Physics A: Materials Science & Processing;2000, Vol. 70 Issue 3, p283 

    Thin films of bismuth-layered perovskites such as SrBi[sub 2] Ta[sub 2] O[sub 9] , Bi[sub 4] Ti[sub 3] O[sub 12] , and BaBi[sub 4] Ti[sub 4] O[sub 15] with preferred orientations were grown by pulsed laser deposition on epitaxial conducting LaNiO[sub 3] electrodes on single-crystalline (100)...

  • Anion-assisted pulsed laser deposition of lead zirconate titanate films. Leuchtner, R.E.; Grabowski, K.S. // Applied Physics Letters;3/9/1992, Vol. 60 Issue 10, p1193 

    Describes the modified pulsed laser deposition technique. Placement of the electron emitting filament over the substrate during deposition; Deposition of oriented films of the ferroelectric perovskite on magnesium oxide substrates; Optimization of the filament; Changes of the surface...

  • Epitaxial ferroelectric Ba[sub 0.5]Sr[sub 0.5]TiO[sub 3] thin films for room-temperature tunable... Chen, C.L.; Feng, H.H.; Zhang, Z.; Brazdeikis, A.; Huang, Z.J.; Chu, W.K.; Chu, C.W.; Miranda, F.A.; Van Kuels, F.W.; Romanofsky, R.R.; Liou, Y. // Applied Physics Letters;7/19/1999, Vol. 75 Issue 3, p412 

    Reports on the synthesis of perovskite barium[sub 0.5]strontium[sub 0.5]titanium oxygen[sub 3] thin films by pulsed laser ablation. Crystalline quality of the epitaxial films; Dielectric property measurements; Dielectric constant.

  • Different fatigue behaviors of SrBi[sub 2]Ta[sub 2]O[sub 9] and Bi[sub 3]TiTaO[sub 9] films: Role... Kang, B.S.; Park, B.H. // Applied Physics Letters;10/25/1999, Vol. 75 Issue 17, p2644 

    Investigates the role of the perovskite layers on fatigue behaviors in SrBi[sub 2]Ta[sub 2]O[sub 9] (SBT) and Bi[sub 3]TiTaO[sub 9] (BTT) films. Preparation of the thin films by pulsed laser deposition; Growth behaviors, electrical properties and retention characteristics of the SBT and BBT films.

  • Pulsed-laser-deposited epitaxial Sr[sup 2]FeMoO[sub 6 - y] thin films: Positive and negative... Asano, H.; Ogale, S.B. // Applied Physics Letters;6/14/1999, Vol. 74 Issue 24, p3696 

    Describes how epitaxial thin films of ordered double-perovskite Sr[sub 2]FeMoO[sub 6-y] are deposited on SrTiO[sub 3] substrates by pulsed-laser deposition using a two step growth process. Selection of growth condition; Highly conductive metallic thin films or semiconducting films; Positive...

  • Controlled crystal growth of layered-perovskite thin films as an approach to study their basic properties. Watanabe, Takayuki; Funakubo, Hiroshi // Journal of Applied Physics;9/1/2006, Vol. 100 Issue 5, p051602 

    This article describes the current progress in thin bismuth layer-structured ferroelectric films (BLSFs) including SrBi2Ta2O9 and (Bi,La)4Ti3O12, particularly those developed in the last ten years. BLSF thin films can be applied to ferroelectric random access memories because of their durable...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics