TITLE

Saving money from the start

AUTHOR(S)
Workman, Lyall; Eloranta, Jack
PUB. DATE
February 2004
SOURCE
Pit & Quarry;Feb2004, Vol. 96 Issue 8, p30
SOURCE TYPE
Trade Publication
DOC. TYPE
Article
ABSTRACT
Reports on the effects of blasting on crushing and grinding efficiency and energy consumption in the U.S. Identification of the important aspects of blasting; Increase of the chances of microfractures to survive the various stages of crushing; Adequacy of the fragmentation distribution in the process of optimizing blasting.
ACCESSION #
12184682

 

Related Articles

  • Tribological characteristics in high-speed grinding of alumina with brazed diamond wheels. Chen, Jianyi; Xu, Xipeng // International Journal of Advanced Manufacturing Technology;Apr2014, Vol. 71 Issue 9-12, p1579 

    In this work, two brazed diamond wheels fabricated by brazing in vacuum were used to grind alumina at different grinding speeds. During the process, the horizontal and vertical grinding forces were measured by a force measurement device. The grinding forces, specific grinding energy, and...

  • Determination of dry grinding properties of floor tile wastes. Ergin, Hasan; Kılıç, Mert; Durgut, Emrah; Kayacı, Kağan; Altintaş, Ali; Yıldırım, Yıldız // Advances in Science & Technology;2014, Vol. 92, p121 

    In ceramic production, there are around 5-8 % of floor tile defects occurred due to unsuitable body compositions or operational failure. The reuse of those fired products creates problems due to the difficult grindability features. These kinds of wastes are stored near factories and create vital...

  • AUTOMATION AND OPTIMIZATION OF COAL GRINDING BY MEANS OF BALL MILLS. PISTUN, Y.; ZAGRAJ, V.; NYKOLYN, H.; FEDORYSHYN, R. // DAAAM International Scientific Book;2012, p87 

    This work deals with the system for automated control and optimization of the technological process of solid material grinding by means of ball mills, which are being applied at heat power stations for grinding the coal, at cement plants for grinding the clinker and at ceramic plants for...

  • RESEARCH ON THE POWER CONSUMPTION IN SANDING PROCESS WITH ABRASIVE BRUSHES, COMPARED TO THE WIDE BELT SANDING. BĂDESCU, Loredana Anne-Marie; ZELENIUC, Octavia; MĂDAN, Ruxandra Loredana; SPÎRCHEZ, Gheorghe-Cosmin // Pro Ligno;2015, Vol. 11 Issue 4, p501 

    This paper presents the modelling of over-finishing grinding with abrasive brushes and also a comparative study between the absorbed power when over-finishing grinding the beech, the spruce and the MDF with this kind of tools as compared to the absorbed power when over-finishing grinding under...

  • Industrial versus Laboratory Clinker Processing Using Grinding Aids (Scale Effect). Assaad, Joseph Jean // Advances in Materials Science & Engineering;12/15/2015, p1 

    The evaluation of grinding aid (GA) effect on clinker processing in laboratory grinding mills is relatively simple. Yet, the results obtained cannot be directly transposed to industrial mills, given the fundamentally different operational modes and grinding parameters. This paper seeks to...

  • THE IMPROVED SYSTEM FOR AUTOMATION AND OPTIMIZATION OF SOLID MATERIAL GRINDING BY MEANS OF BALL MILLS. FEDORYSHYN, oman; NYKOLYN, ryhoriy; ZAGRAJ, olodymyr; PISTUN, evhen // Annals of DAAAM & Proceedings;2012, Vol. 23 Issue 1, p0053 

    This work deals with the system for automated control and optimization of the technological process of solid material grinding by means of ball mills, which are being applied at heat power stations for grinding the coal, at cement plants for grinding the clinker and at ceramic plants for...

  • Analysis on Production Plan and Results of Ground Granulated Blast Furnace Slag Based on Circle Flow Mill. Guanghui Cheng; Yuan Song // Applied Mechanics & Materials;2014, Vol. 687-691, p4187 

    The change of the specific surface area, particle size and activity index of ground granulated blast furnace slag under different grinding conditions is researched based on closed-circuit mill in the paper. The research shows that the grinding effect is greatly different with the different...

  • The Assessment of Subsurface Damage in Ground Optics by Chemical Etching. Hui Ye; Wei Yang // Key Engineering Materials;2016, Vol. 679, p149 

    Optical subsurface damage (SSD), generated from traditional grinding and polishing process, is prone to lower the laser-induced damage threshold (LIDT) of optical elements. Due to the fact that SSD elimination is on the premise of SSD evaluation, numerous SSD characterizing techniques have been...

  • UTILIZATION OF METAL SUBSTANCE FROM FOUNDRY DUSTS. Pribulova, Alena; Futas, Peter; Baricova, Dana // Proceedings of the International Multidisciplinary Scientific Ge;2011, Vol. 3, p925 

    The foundry industry, itself, is one of the world's first recyclers. Foundries have been making new metal objects by remelting old ones. An estimated 15 to 20 million tons of scrap metal that would otherwise be sent to overcrowded landfills are being remade into new castings each year. As with...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics