TITLE

Measurement of H/D ratio and ion temperature on a HT-6M Tokamak

AUTHOR(S)
Wei, Lehan; Lin, Xiaodong
PUB. DATE
January 1997
SOURCE
Review of Scientific Instruments;Jan1997, Vol. 68 Issue 1, p83
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Reports that combining optical fibers with piezoelectric scanning Fabry-Perot interferometer, the profiles of H[subα] and D[subα] can be determined simultaneously in a single Tokamak discharge. Results which indicate the ratio of hydrogen to deuterium and ion temperature; Avoidance of the uncertainty of shot-to-shot; Indication that this instrumentation has the advantage of rapid wavelength scanning, large dispersion, high resolution, and good adaptability of working in adverse circumstances such as at a Tokamak site.
ACCESSION #
12056418

 

Related Articles

  • Using An Optical Fiber fed Littrow Cavity as a Displacement Sensor for use in Drag-Free Satellites. Allen, Graham; Sun, Ke-Xun; Byer, Robert // AIP Conference Proceedings;2006, Vol. 873 Issue 1, p334 

    We have demonstrated a novel compact optical sensor suitable for use as a position sensor in a drag-free control system. The sensing element is a low-finesse Fabry-Perot cavity formed by a Littrow mounted diffraction grating and the surface of the proof-mass. The cavity width allows...

  • Optical and mechanical multistability in a dye-doped polymer fiber Fabry-Perot waveguide. Welker, D.J.; Kuzyk, M.G. // Applied Physics Letters;5/22/1995, Vol. 66 Issue 21, p2792 

    Observes photomechanical multistability of a dye-doped polymer optical fiber incorporating Fabry-Perot waveguide interferometer. Role of waveguide imperfection in the formation of secondary Fabry-Perot cavity; Correlation between length and refractive index and light intensity of the device;...

  • Micromachined Fabry-Perot resonator combining submillimeter cavity length and high quality factor. Malak, M.; Pavy, N.; Marty, F.; Peter, Y.-A.; Liu, A. Q.; Bourouina, T. // Applied Physics Letters;5/23/2011, Vol. 98 Issue 21, p211113 

    We demonstrate experimentally optical quality factor of nearly 9000 in a micromachined Fabry-Pérot resonator based on free space propagation of light and direct coupling to optical fibers. This result is obtained on long cavity resonators (L>250 μm), a usually difficult case in terms of...

  • Optical fiber sensor for small angle and infinite angle detection. Lü, Tao; Lang, Xianli; Han, Yanling // Review of Scientific Instruments;May2008, Vol. 79 Issue 5, p053105 

    An optical fiber angle sensor that consists of a cam, linear displacement attenuators, and a sensitive Fabry–Pérot cavity (FPC), is demonstrated to simultaneously measure small angle and infinite angle with high resolution. When the cam is driven to rotate by a fixed rotary shaft, a...

  • Fabry-Perot industry ready. Sheble, Nicholas // InTech;Jan2004, Vol. 51 Issue 1, p45 

    Discusses the potential benefits of fiber-optic sensing technology for industrial applications. Capabilities of fiber-optic sensors; Features of Fabry-Perot optical sensors; Range of nanometer displacements that can be measured by optical interrogators in signal conditioners.

  • Optical fiber temperature sensor using a gain-switched Fabry–Perot semiconductor laser self-seeded from a linearly chirped fiber Bragg grating. Li, Shenping; Chan, K. T. // Applied Physics Letters;12/7/1998, Vol. 73 Issue 23 

    We present a highly sensitive fiber temperature sensor based on a gain-switched Fabry–Perot semiconductor laser self-seeded from a linearly chirped fiber Bragg grating. A temperature resolution of better than 0.1 °C was demonstrated. This sensor not only has the advantage of robustness...

  • An optical fiber multiplexing system using Fabry–Perot cavities. Wang, Qi // Review of Scientific Instruments;Jan1993, Vol. 64 Issue 1, p82 

    An optical fiber multiplexing sensing system with Fabry–Perot interferometers is proposed. A white light source and multimode fibers are used in the system. A theoretical result for the central maximum optical transmittance peak’s half width is given. In the proposed system, a...

  • Recent Improvement of Medical Optical Fibre Pressure and Temperature Sensors. Poeggel, Sven; Duraibabu, Dineshbabu; Kalli, Kyriacos; Leen, Gabriel; Dooly, Gerard; Lewis, Elfed; Kelly, Jimmy; Munroe, Maria // Biosensors (2079-6374);2015, Vol. 5 Issue 3, p432 

    This investigation describes a detailed analysis of the fabrication and testing of optical fibre pressure and temperature sensors (OFPTS). The optical sensor of this research is based on an extrinsic Fabry-Perot interferometer (EFPI) with integrated fibre Bragg grating (FBG) for simultaneous...

  • Fiber Bragg grating-based Fabry-Perot interferometer in polymer fiber. Statkiewicz-Barabach, G.; Maniewski, P.; Mergo, P.; Urbanczyk, W. // POF Plastic Optical Fiber;Jul/Aug2016, Vol. 26 Issue 4, p107 

    In this work, we demonstrate for the first time Fabry-Perot interferometer (FPI) based on a pair of Bragg gratings fabricated in a step-index PMMA fiber with a core made of PMMA/PS copolymer (SIPMMA/PS). By choosing an appropriate length of FP cavity between the gratings and fabrication time we...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics