TITLE

NANOCRYSTAL FORMATION IN LIGHT METALLIC GLASSES AT HEATING AND DEFORMATION

AUTHOR(S)
Aronin, A.; Budchenko, A.; Matveev, D.; Pershina, E.; Tkatch, V.; Abrosimova, G.
PUB. DATE
October 2016
SOURCE
Reviews on Advanced Materials Science;2016, Vol. 46 Issue 1, p53
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Structure evolution of amorphous alloys at heat treatment and deformation is discussed. Amorphous structure change before crystallization is considered for Al-, Ni-, Fe-, Zrbased systems. Property change with structure evolution is discussed as well. Nanocrystal formation in light metallic glasses is studied at heating and deformation. The sizes of the nanocrystals forming during plastic deformation were found to be smaller than those of the nanocrystals forming on thermal treatment. The sizes of the nanocrystals do not change (Al-Ni-Gd, Al-Y) or change only slightly (Al-Ni-La) with increasing degree of plastic deformation whilst their volume content increases and the fraction of nanocrystals in the deformed samples is larger than that in the samples subjected to thermal treatment. Using combined treatment (plastic deformation + annealing) was observed to result in intermediate nanocrystals size.
ACCESSION #
119017006

 

Related Articles

  • Strain localization in a nanocrystalline metal: Atomic mechanisms and the effect of testing conditions. Rupert, Timothy J. // Journal of Applied Physics;Jul2013, Vol. 114 Issue 3, p033527 

    Molecular dynamics simulations are used to investigate strain localization in a model nanocrystalline metal. The atomic mechanisms of such catastrophic failure are first studied for two grain sizes of interest. Detailed analysis shows that the formation of a strain path across the sample width...

  • Kinetics of structural relaxation of bulk and ribbon Pd40Cu30Ni10P20 glasses determined from electrical resistance measurements. Khonik, S. V.; Sviridov, V. V.; Kobelev, N. P.; Yazvitskiĭ, M. Yu.; Khonik, V. A. // Physics of the Solid State;Aug2007, Vol. 49 Issue 8, p1411 

    The electrical resistances of ribbon and bulk Pd40Cu30Ni10P20 metallic glasses, whose quenching rates differ by four orders of magnitude, were precisely measured during cyclic heating. Three stages of electrical resistance relaxation are detected as the maximum heating temperature increases. The...

  • Nanocrystalline Phase Formation inside Shear Bands of Pd-Cu-Si Metallic Glass. Yang Shao; Guannan Yang; Kefu Yao // Advances in Materials Science & Engineering;2014, p1 

    Pd77.5Cu6Si16.5 metallic glass was prepared by fluxing treatment and water quenching method. To avoid possible artifacts, shear bands were created by indentation after TEM sample preparation. Bright field image, diffraction pattern, and the dark field image of TEM that covered the shear band...

  • Nanoscale multistep shear band formation by deformation-induced nanocrystallization in Zr-Al-Ni-Pd bulk metallic glass. Saida, Junji; Setyawan, Albertus Deny Heri; Kato, Hidemi; Inoue, Akihisa // Applied Physics Letters;10/10/2005, Vol. 87 Issue 15, p151907 

    A single Zr65Al7.5Ni10Pd17.5 bulk metallic glass exhibits a large plastic strain of 6.6% during the compressive deformation process, which is attributed to the deformation mode with nanoscale multistep shear bands. We have observed that nanocrystals with a metastable fcc Zr2Ni structure...

  • Formation and properties of strontium-based bulk metallic glasses with ultralow glass transition temperature. Zhao, Kun; Jiao, Wei; Ma, Jiang; Gao, Xuan Qiao; Wang, Wei Hua // Journal of Materials Research;Dec2012, Vol. 27 Issue 20, p2593 

    We report a family of novel Strontium (Sr)-based bulk metallic glasses (BMGs) with good glass-forming ability and ultralow glass transition temperature (Tg) by strategic composition design. The Sr-based BMGs can be easily formed with wide composition range by a conventional copper mold cast...

  • Deformation behavior of Ti-Zr-Ni-Cu-Be metallic glass and composite in the supercooled liquid region. Bae, D. H.; Park, J. M.; Na, J. H.; Kim, D. H.; Kim, Y. C.; Lee, J. K. // Journal of Materials Research;Mar2004, Vol. 19 Issue 3, p937 

    The deformation behavior of Ti-based bulk metallic glass (BMG) and metallic glass matrix composite (MGMC), both having a multistep crystallization behavior upon heating, has been investigated in the supercooled liquid region. The BMG deforms homogeneously and exhibits moderate elongation to...

  • Influence of the loading rate on the indentation response of Ti-based metallic glass. Sort, J.; Fornell, J.; Li, W.; Suriñach, S.; Baró, M. D. // Journal of Materials Research;Mar2009, Vol. 24 Issue 3, p34 

    The mechanical behavior of Ti-based metallic glass has been investigated by means of indentation experiments at different loading rates. Contrary to many crystalline materials, an increase of the loading rate causes a reduction of hardness, i.e., a mechanical softening. This effect is ascribed...

  • Effect of room temperature ageing on structure and thermal stability of as-cast and deformed Pd40Ni40P20 metallic glass. Xu, Yuanli; Liang, Wei // International Journal of Modern Physics B: Condensed Matter Phys;Aug2018, Vol. 32 Issue 21, pN.PAG 

    The effect of long-term room temperature ageing on structure and thermal stability of as-cast and inhomogeneously deformed Pd 4 0 Ni 4 0 P 2 0 metallic glass has been investigated. It is found that the first crystallization peak temperature decreases and this indicates that the thermal...

  • Indentation behavior of a ZCAP-3 bulk metallic glass: Effects of the fatigue deformation. Fuqian Yang; Hongmei Dang; Gongyao Wang; Yokoyama, Yoshihiko; Liaw, Peter K. // Journal of Materials Research;Jul2009, Vol. 24 Issue 7, p24 

    The effects of the fatigue deformation on the localized deformation of a ZCAP-3 bulk metallic glass (BMG) were studied using the nanoindentation technique. A localized mechanical hardening was observed in the ZCAP-3 BMG between the shear bands in the fatigue-damaged zone. In contrast to the...

  • On the determination of the crystallization activation energy of metallic glasses. Khonik, V. A.; Kitagawa, K. // Journal of Applied Physics;6/15/2000, Vol. 87 Issue 12, p8440 

    Presents information on a study which measured the dependence of the crystallization temperature on the heating rate for five conventional melt spun metallic glasses. Experimental details; Results and discussion; Conclusions.

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics