Modeling of Methyl Methacrylate Polymerization Using MATLAB

Law, Woon Phui; Ibrahim, Wan Hanisah Wan; Gimbun, Jolius
September 2016
Chemical Product & Process Modeling;Sep2016, Vol. 11 Issue 3, p185
Academic Journal
No abstract available.


Related Articles

  • SANS study of three-layer micellar particles. Pleštil, J.; Pospíšil, H.; Kuklin, A.I.; Cubitt, R. // Applied Physics A: Materials Science & Processing;Dec2002 Supplement, Vol. 74 Issue 6, ps405 

    Three-layer nanoparticles were prepared by polymerization of methyl methacrylate (MMA) in aqueous micellar solutions of poly(methyl methacrylate)—block-poly(methacrylic acid) (PMMA-b-PMA) and polystyrene-block-poly (methacrylic acid) (PS-b-PMA). The resulting polymer forms a layer on the...

  • Swelling of Poly(methyl Methacrylate) Resin at the Repair Joint. Vallittu, Pekka K.; Ruyter, I. E. // International Journal of Prosthodontics;May/Jun1997, Vol. 10 Issue 3, p254 

    This study investigated the thickness of a swollen layer between heat-activated and autopolymerized denture base polymer based on poly(methyl methacrylate) and autopolymerized repair acrylic resin. The repair surfaces of polymerized poly(methyl methacrylate) resin specimens (n = 5) were wet with...

  • Statistical approach to model discrimination for the radical copolymerization of methyl methacrylate and styrene from a posteriori data of composition. Kaim, Andrzej; Oracz, Pawel // e-Polymers;Apr2003, p1 

    Focuses on the radical copolymerization of methyl methacrylate and styrene. Comparison of different methods for the copolymerization of the styrene; Role of multi-response maximum likelihood method in the copolymerization; Kinetic models used for the radical copolymerization of methyl...

  • Investigation of Aliphatic Polyesters as Hydrogen Donor in Photoinitiated Free Radical Polymerization. AKAT, HAKAN; OZKAN, MELEK; SALTAN, FEHMI // Asian Journal of Chemistry;2012, Vol. 24 Issue 10, p4558 

    In the present study, it has been demonstrated that polyesters were used as hydrogen donors in photoinitiated free radical polymerization of methyl methacrylate, N-methyl-2-pyrolidone and methacrylic acid by using one of the following photosensitizers; benzophenone, thioxanthone and...

  • A new lithography of functional plasma polymerized thin films. Kim, Sung-O // AIP Conference Proceedings;2001, Vol. 550 Issue 1, p548 

    The preparation of the resist for the vacuum lithography was carried out by plasma polymerization. The resist manufactured by plasma polymerization is a monomer produced by MMA (Methyl methacrylate). The functional groups of MMA appeared in the PPMMA (Plasma Polymerized Methyl methacrylate) as...

  • Morphology of plasma polymerized methyl methacrylate films. Guifang Li; Tobin, Jeffrey A.; Denton, Denice D. // Applied Physics Letters;1/31/1994, Vol. 64 Issue 5, p560 

    Investigates the surface morphology of plasma polymerized methyl methacrylate films using atomic force microscopy. Composition of the plasma polymer surfaces; Relation between the average grain size and deposition time; Microscopic properties of plasma polymers.

  • Fluorescence characterization of ablated polymeric materials: Poly(methyl methacrylate) doped with 1-ethylpyrene. Itaya, Akira; Kurahashi, Akihiko; Masuhara, Hiroshi; Taniguchi, Yoshio; Kiguchi, Masashi // Journal of Applied Physics;3/1/1990, Vol. 67 Issue 5, p2240 

    Provides information on a study concerning the fluorescence characterization of polymeric materials, methyl methacrylate films using excimer laser as an ablation source. Experiment; Effect of ablation on properties of polymer films; Fluorescence dynamics.

  • Effects of deposition parameters on the refractive index in plasma polymerized methyl.... Tobin, J.A.; Denton, D.D. // Applied Physics Letters;5/25/1992, Vol. 60 Issue 21, p2595 

    Investigates the plasma polymerization of methyl methacrylate for use in microelectronic and photonic application. Effects of varying radio frequency power and neutral pressure on deposition rate and refractive index; Measurement of the index of refraction and thickness of the films.

  • ABS and styrene copolymers - an overview. Niebner, Norbert // e-Polymers;Mar2002, p1 

    Studies the synthesis of acrylonitrile butadiene styrene with styrene/acrylonitrile copolymers. Production of acrylonitrile butadiene styrene by mass or emulsion polymerization; Use of methyl methacrylate-acrylonitrile-butadiene-styrene polymers in medical technologies.

  • Thermal stability and degradation of selected poly(alkyl methacrylates) used in the polymer industry. Czech, Zbigniew; Agnieszka, Kowalczyk; Ragańska, Paulina; Antosik, Adrian // Journal of Thermal Analysis & Calorimetry;Feb2015, Vol. 119 Issue 2, p1157 

    This article describes our results for the thermal stability and thermal degradation of poly(alkyl methacrylates) based on selected methacrylate monomers, namely methyl methacrylate, butyl methacrylate, and 2-ethylhexyl methacrylate, which are used in the polymer industry in the manufacture of...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics