The confusing array of tooth-colored crowns

Christensen, Gordon J.
September 2003
Journal of the American Dental Association (JADA);Sep2003, Vol. 134 Issue 9, p1253
Academic Journal
Presents an overview of the available types of tooth-colored, non-metal-containing crowns and fixed prostheses. Suggestions about the most appropriate clinical situations for using the crowns; Comparison of the all-ceramic or resin-based composite crowns with the porcelain-fused-to metal crowns; Aesthetic results of the non-metal containing crowns.


Related Articles

  • A comparative study on the retention of full coverage cast crowns cemented with zinc phosphate cement with and without die relief agent on prepared human teeth. Luthra, R. // Journal of Indian Prosthodontic Society;Jun2005, Vol. 5 Issue 2, p82 

    Purpose of study: The purpose of this study is to analyze the effect of die spacer on retention of full coverage crowns. The success of a full cast crown restoration depends on the marginal fit and the retention of the restoration. The application of die spacer helps to improve the fit of the...

  • Intraoral welding of pure titanium. Hruska, A. R. // Quintessence International;Oct1987, Vol. 18 Issue 10, p683 

    The article presents a research which examines the effectiveness of pure titanium in the field of fixed prosthodontics. It is stated that the use of titanium in the fabrication of removable partial dentures will probably be widely excepted because its biocompatibility characteristic overcomes...

  • Resin bonded fixed partial dentures utilizing additional pin retention. Wiltshire, William A. // Quintessence International;Jun1986, Vol. 17 Issue 6, p343 

    The article presents information regarding resin bonded fixed partial dentures techniques. Various advantages of the technique include minimal tooth reduction, semior total reversibility, advantageous soft tissue management, and non-requirement of temporary crowns. One of the disadvantages of...

  • Invisible Supragingival Crown Margins: An In Vitro Study. Kopp, F. R.; Belser, U. C.; Hess, D. // International Journal of Prosthodontics;Jul/Aug1989, Vol. 2 Issue 4, p331 

    A method of improving the esthetics and seal of porcelain crown margins using composite resin is described. The procedure includes a circumferential shoulder-type preparation located entirely in enamel. To provide adequate space for a thin layer of composite resin to blend gradually into both...

  • A One-Step Putty-Wash Impression Technique Utilizing Vinyl Polysiloxanes. Pameijer, Cornelis H. // Quintessence International;Aug1983, Vol. 14 Issue 8, p861 

    The article presents information on a putty-wash impression technique using Vinyl polysiloxanes. The vinyl polysiloxanes are nontoxic and nonirritating addition-cured elastomeric impression materials. The author states that the technique, in which the putty and wash material are combined in a...

  • Extracoronal direct retainers for distal extension removable partial dentures. Aras, M. A. // Journal of Indian Prosthodontic Society;Jun2005, Vol. 5 Issue 2, p65 

    Distal-extension removable partial dentures have always posed a challenging situation to the clinician and in such cases the strategic positioning of the direct retainers would ensure the long-term success of the prosthesis. Different direct retainer designs have been discussed by various...

  • Removal of "black-line" margins and improving esthetics of porcelain-fused-to-metal crowns. Bertolotti, Raymond L. // Quintessence International;Sep1987, Vol. 18 Issue 9, p645 

    The article presents information related to tissue retraction, a dental technology used for the removal of black-line margins and improving esthetics of porcelain-fused-to-metal crowns. As reported, in order to isolate the field and provide a slightly subgingival margin, this technique is made...

  • The Effect of Die Spacing on Crown Deformation and Seating Time. Wilson, Peter Robert // International Journal of Prosthodontics;Jul/Aug1993, Vol. 6 Issue 4, p397 

    A machined brass crown, onto which a strain gauge had been attached, was filled with a silicone fluid and placed on various dies to simulate luting using zinc phosphate cement. Space between the crown and the die was varied, as was the seating force. As the load increased, crown deformation...

  • Scanning electron microscopic studies of the marginal fit of three esthetic crowns. Chan, Clifford; Haraszthy, Geza; Geis-Gerstorfer, Juergen; Weber, Heiner; Huettemann, Horst // Quintessence International;Mar1989, Vol. 20 Issue 3, p189 

    The article presents scanning electron microscopic studies of the marginal fit of three esthetic crowns. This study was carried out to record the extremes of marginal discrepancy and surface deformities of metal-ceramic, collarless, and cerestore complete crowns. It was revealed by scanning...


Read the Article


Sign out of this library

Other Topics