TITLE

Mathematical Modeling and Investigation on the Temperature and Pressure Dependency of Permeation and Membrane Separation Performance for Natural gas Treatment

AUTHOR(S)
Hosseini, Seyed Saeid; Dehkordi, Javad Aminian; Kundu, Prodip K.
PUB. DATE
March 2016
SOURCE
Chemical Product & Process Modeling;Mar2016, Vol. 11 Issue 1, p7
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
No abstract available.
ACCESSION #
113704397

 

Related Articles

  • Removal of CO2 from Natural Gas Using Membrane Separation System: Modeling and Process Design. Ahmad, F.; Lau, K. K.; Shariff, A. M. // Journal of Applied Sciences;2010, Vol. 10 Issue 12, p1134 

    Natural Gas (NO) processing is one of the major industrial separation processes. Membrane process, a relatively new technology among other available techniques, can be used for the removal of impurities like carbon dioxide from NG. Membrane performance has been described by different...

  • The Study of Joule Thompson Effect for the Removal of CO2 from Natural Gas by Membrane Process. Ahmad, Faizan; Keong, Lau Kok; Shariff, Azmi Mohd; Murshid, Ghulam // International Journal of Chemical & Environmental Engineering;Apr2012, Vol. 3 Issue 2, p115 

    In recent years membrane gas separation has emerged as an alternative of other available technologies (such as absorption and cryogenic separation) in order to remove CO2 from natural gas. A common phenomenon during gas separation by membrane is the occurrence of Joule-Thomson (JT) effect. The...

  • Pervaporative removal of acrylonitrile from aqueous streams through polydimethylsiloxane membrane. Aliabadi, Majid; Aroujalian, Abdolreza; Raisi, Ahmadreza // Water Science & Technology;2011, Vol. 63 Issue 12, p2820 

    This study describes the successful separation of acrylonitrile (ACN) from dilute aqueous streams using pervaporation process. The influences of ACN feed concentration, permeate pressure, operating temperature, feed flow rate and membrane thickness on the membrane separation performance were...

  • The pervaporation performance and mass transfer process of PDMS membranes for acetic acid/water mixture. Housheng Hong; Longxiang Chen; Qingwen Zhang; Tao You // e-Polymers;Feb2011, p1 

    Polydimethylsiloxane (PDMS) membranes with different silica content were prepared without support. The characterization and performance of the membranes were investigated by scanning electron microscope (SEM), thermogravimetry analysis (TGA), contact angle meter and swelling experiment. The...

  • Prediction of pervaporation performance of aqueous ethanol solutions based on single gas permeation. Jinhui Wang; Yoshioka, Tomohisa; Kanezashi, Masakoto; Tsuru, Toshinori // Desalination & Water Treatment;May2010, Vol. 17 Issue 1-3, p106 

    In this study, pervaporation (PV) performance of porous silica membranes during dehydration of ethanol aqueous solutions was correlated with single gas permeation data in an attempt to predict PV performance. Porous silica membranes were prepared using a sol-gel technique with silica or...

  • PERFORMANCE OF LOW PRESSURE REVERSE OSMOSIS MEMBRANE (LPROM) FOR SEPARATING MONO- AND DIVALENT IONS. Zaini Ujang; Anderson, G.K. // Water Science & Technology;1998, Vol. 38 Issue 4/5, p521 

    Investigates the performance of low pressure reverse osmosis membrane (LPROM) for separating mono and divalent ions. Effect of operating pressure, feed concentration and temperature on metal removal; Removal of heavy metals at various operating conditions; Permeate flux in both mono and...

  • CO2 Selective Water Gas Shift Membrane Reactor: Modeling and Simulation. Sang Kompiang Wirawan; Creaser, Derek; I Made Bendiyasa; Wahyudi Budi Sediawan // ASEAN Journal of Chemical Engineering;Jun2012, Vol. 12 Issue 1, p59 

    The concept of a CO2 selective water gas shift (WGS) membrane reactor has been modeled and simulated by a one-dimensional reactor and transport process in the membrane. The model was used to investigate the effect of temperature, total pressure, membrane thickness and area on the reactor...

  • ULTRAFILTRATION OF OILY EMULSION FOR METAL CUTTING FLUID: ROLE OF FEED TEMPERATURE. Xianguo Hu; Bekassy-Molnar, Erika; Vatai, Gyula; Koris, Andras // Environment Protection Engineering;2005, Vol. 31 Issue 3/4, p109 

    The oil-in-water emulsions as industrial wastewaters are produced in a large amount in the metal working, food producing and other industrial branches. Separation of oil from water, both being the phases of emulsion, is economically realizable by membrane techniques. There arc so many membrane...

  • PARAMETRICAL STUDY OF STEAM METHANE REFORMING IN A MEMBRANE REACTOR. Carcadea, Elena; Varlam, Mihai; Stefanescu, Ioan; Marinoiu, Adriana; Tanislav, Vasile; Capris, Catalin // Progress of Cryogenics & Isotopes Separation;2012, Vol. 15 Issue 2, p25 

    The aim of this paper is the parametric investigation of methane steam reforming to synthesis gas in a membrane reactor. Steam methane reforming in a membrane reactor is investigated in this paper using ANSYS Fluent software. The influence of some parameters on mass and heat transfer is...

  • Separation of CO2 and CH4 by a DDR membrane. van den Bergh, Johan; Zhu, Weidong; Kapteijn, Freek; Moulijn, Jacob A.; Yajima, Kenji; Nakayama, Kunio; Tomita, Toshihiro; Yoshida, Shuichi // Research on Chemical Intermediates;2008, Vol. 34 Issue 5-7, p467 

    The permeation of CO2 and CH4 and their binary mixtures through a DDR membrane has been investigated over a wide range of temperatures and pressures. The synthesized DDR membrane exhibits a high permeance and maintains a very high selectivity for CO2. At a total pressure of 101 kPa, the highest...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics