TITLE

CORROSION BEHAVIOR OF 6063 ALUMINUM ALLOY IN ETHYLENE GLYCOL-WATER SOLUTION

AUTHOR(S)
Haroooni, A. Qaed Amini; Eskandari, H.; Maddahy, M. H.; Danaee, I.; Nikmanesh, S.
PUB. DATE
December 2015
SOURCE
Iranian Journal of Materials Science & Engineering;Dec2015, Vol. 12 Issue 4, p34
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The electrochemical behavior of6063 aluminum alloy in ethylene glycol-water mixture was investigated by polarization curves and AC impedance measurements (EIS). The results obtained from polarization curves showed that corrosion rate decreased with increasing ethylene glycol concentration. EIS data showed the decrease in the interface capacitance which caused by adsorption of ethylene glycol at the surface of aluminum alloy. The cathodic current increased with the increase in rotating speeds of solution and the anodic current decreased. The effect of temperature was studied and the corrosion rate was increased with increasing the temperature. In addition, thermodynamic parameters were calculated in different ethylene glycol concentrations.
ACCESSION #
112291707

 

Related Articles

  • Corrosion Inhibition of Zn-Al-Cu Alloy by 2-Aminothiazole. Mazhar, A. A.; Salih, S. A.; Gad-Allah, A. G.; Tammam, R. H. // Journal of Materials Engineering & Performance;Apr2008, Vol. 17 Issue 2, p260 

    The inhibitive effect of 2-aminothiazole on corrosion of Zn-Al-Cu alloy was investigated in acid, neutral and alkaline media by impedance and polarization techniques. The impedance data were fitted to a simple equivalent circuit model and indicated control by a diffusion process. Satisfactory...

  • Effect of pulsed electric current treatment on corrosion of structural metals. Babutskii, A.; Chrysanthou, A.; Ioannou, J. // Strength of Materials;Jul2009, Vol. 41 Issue 4, p387 

    Results of corrosion tests of structural metals previously treated using pulsed electric current of high density are presented. According to the data obtained, the treatment substantially affects corrosion of metals. In cases of HSLA steel and 5182 aluminum alloy, an increase of corrosion...

  • Inhibiting effect of cerium ions on corrosion of 3003 aluminum alloy in ethylene glycol-water solutions. Liu, Y.; Cheng, Y. F. // Journal of Applied Electrochemistry;Apr2011, Vol. 41 Issue 4, p383 

    In this study, the inhibiting effect of cerium ions (Ce) on corrosion of 3003 aluminum alloy (AA3003) in ethylene glycol-water solutions was investigated using a rotating cylinder electrode, simulating the hydrodynamic condition of the automotive cooling system. Electrochemical measurements and...

  • Inhibition of Corrosion of 3003 Aluminum Alloy in Ethylene Glycol-Water Solutions. Liu, Y.; Cheng, Y. // Journal of Materials Engineering & Performance;Mar2011, Vol. 20 Issue 2, p271 

    In this study, the inhibiting effects of four types of inhibitors, including gluconate, cinnamate, molybdate, and nitrate, on corrosion of a 3003 aluminum (Al) alloy were investigated in ethylene glycol-water solutions that simulate the automotive coolant by various electrochemical measurements....

  • Characterization of passivity and pitting corrosion of 3003 aluminum alloy in ethylene glycol-water solutions. Liu, Y.; Cheng, Y. F. // Journal of Applied Electrochemistry;Feb2011, Vol. 41 Issue 2, p151 

    In this work, the passivity and pitting corrosion behavior of 3003 aluminum (Al) alloy in ethylene glycol-water solutions was investigated using various electrochemical measurements, Mott-Schottky analysis and surface analysis techniques. Results demonstrate that the passive film formed on Al...

  • Effect of Nano-crystalline Ceramic Coats Produced by Plasma Electrolytic Oxidation on Corrosion Behavior of AA5083 Aluminum Alloy. Thayananth, T.; Muthupandi, V.; Rao, S. R. Koteswara // AIP Conference Proceedings;10/4/2010, Vol. 1276 Issue 1, p131 

    High specific strength offered by aluminum and magnesium alloys makes them desirable in modern transportation industries. Often the restrictions imposed on the usage of these alloys are due to their poor tribological and corrosion properties. However, their corrosion properties can be further...

  • Inhibition of Aluminum Alloy Corrosion in 0.5 M Nitric Acid Solution by 4-4-Dimethyloxazolidine-2-thione. Musa, Ahmed; Mohamad, Abu; Kadhum, Abdul; Tabal, Yousef // Journal of Materials Engineering & Performance;Apr2011, Vol. 20 Issue 3, p394 

    The corrosion inhibition of Al-Alloy (Al2024) in 0.5 M nitric acid solution at 30 °C was achieved using 4-4-dimethyloxazolidine-2-thione (DMT) as a corrosion inhibitor. The electrochemical performance of the DMT was studied by electrochemical impedance spectroscopy (EIS), potentiodynamic...

  • Feasibility of determining corrosion rates by means of stray current-induced polarisation. Andrade, C.; Martínez, I.; Castellote, M. // Journal of Applied Electrochemistry;Oct2008, Vol. 38 Issue 10, p1467 

    To measure metal corrosion it is necessary to make direct physical contact with the specimen or component acting as the working electrode. The most widely used method for determining the corrosion current is electrochemical, the so-called polarisation resistance method. The feasibility of a new...

  • ALUMINUM Q&A. ANDERSON, TONY // Welding Journal;Apr2011, Vol. 90 Issue 4, p14 

    The article presents an answer to a question on corrosion behavior of aluminum and its alloys.

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics