TITLE

Experimental Investigation on Electorhydrodynamically Enhanced Heat Transfer in Partially Open Enclosures

AUTHOR(S)
Fazlollahi, F.; Alemrajabi, A. A.
PUB. DATE
January 2016
SOURCE
Journal of Applied Fluid Mechanics;2016, Vol. 9 Issue 1, p139
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Experimental investigation on heat transfer enhancement by applying electrohydrodynamics (EHD) in partially open multiple fined enclosures with different aperture position has been performed. The enclosure had five thermally and electrically insulated faces; while one face was copper finned plate with an aperture located on its opposite face. In the present study, different parameters including electric current, number of fins, aperture position, and corona polarity were investigated. It was concluded that heat transfer enhancement is proportional to the supplied current. Higher number of fins can lead to further heat transfer enhancement and as the location of aperture is shifted upward, the heat transfer coefficient is improved more significantly by EHD.
ACCESSION #
112085602

 

Related Articles

  • The effect of non-zero thermal radiation transmissivity of the aluminized mylar film on the thermal performance of super-insulation. Ohmori, T.; Yamamoto, A.; Nakajima, M. // AIP Conference Proceedings;2002, Vol. 613 Issue 1, p1573 

    The heat transfer analysis of multi-layer insulation (MLI) studied before does not consider that radiant energy is transmitted through the thin aluminum coatings of the insulation films. The radiation heat flux is analyzed only between the adjacent films. The thermal radiation coefficient of...

  • Process-level model evaluation: A Snow and Heat Transfer Metric. Slater, Andrew G.; Lawrence, David M.; Koven, Charles D. // Cryosphere Discussions;2016, p1 

    Land models require evaluation in order to understand results and guide future development. Examining functional relationships between model variables can provide insight into the ability of models to capture fundamental processes and aid in minimizing uncertainties or deficiencies in model...

  • Save Money by Optimizing Your Furnace Burner Fire Rate. Belt, Cynthia K. // Industrial Heating;Apr2014, Vol. 82 Issue 4, p47 

    The article focuses on the optimization of melting furnaces for cost reduction. The author notes that many aluminum melting and holding furnaces are designed with a burner fire rate higher than it needs. The author adds that furnace designers want to make sure that furnaces will melt at the...

  • PIPE/KWIKFLEXâ„¢/PIPE AND TANK.  // Heating/Piping/Air Conditioning Engineering;Jun2004, Vol. 76 Issue 6, special section p8 

    Provides information on several pipe insulation materials. Density; Thermal conductivity; Water vapor transmission; Packaging.

  • BÄ°NA KABUÄžU YÃœZEY ALANI VE YALITIM KALINLIÄžININ ISITMA MALÄ°YETÄ° ÃœZERÄ°NDE ETKÄ°LERÄ°. Aksoy, U. Teoman; Keleşoğlu, Ömer // Journal of the Faculty of Engineering & Architecture of Gazi Uni;Mar2007, Vol. 22 Issue 1, p103 

    In this study, the energy losses from opaque parts of building envelope are investigated according to surface area, building orientation stated and insulation thickness. Time-dependent one dimensional heat transfer is assumed to exist in external walls and an expilicit finite difference method...

  • DUVAR YALITIM KALINLIÄžININ PENCERE ALANLARINA ETKÄ°SÄ°NÄ°N ARAÅžTIRILMASI. ÖZEL, Meral; PIHTILI, Kâzim // Journal of the Faculty of Engineering & Architecture of Gazi Uni;Sep2008, Vol. 23 Issue 3, p655 

    In this study, effect of insulation thickness on glass area has been investigated numerically. For this purpose, glass area on the wall having different insulation thicknesses was increased from %0 to %100 with an ratio of %10 and, heat gain and losses according to be single glass and double...

  • Thermomechanics of Active Thermal Insulation with Circular Blowing of the Heat Carrier. Teplitskii, Yu.; Pitsukha, E.; Borodulya, V.; Belonovich, D. // Journal of Engineering Physics & Thermophysics;Jan2014, Vol. 87 Issue 1, p83 

    We have investigated the influence of the nonisothermicity of a granular bed and gas compressibility on the resistance of thermal insulation with circular blowing of the heat carrier. An approximating dependence of the resistance of the bed on its geometric, hydrodynamic, and thermophysical...

  • FULLERENE TYPE MULTILAYER INSULATION BLANKET ON A SPHERICAL COLD SURFACE. Ohmori, T.; Shinozaki, T.; Kaneko, H. // AIP Conference Proceedings;4/9/2010, Vol. 1218 Issue 1, p928 

    Fullerene type multilayer insulation blanket is proposed for the insulation around a spherical cold surface, and has been applied to a 10 liter spherical tank of liquid nitrogen. As fullerene has 32 faces with 90 edges, 32 polygons of stacked insulation sheets must be connected each other to...

  • AEROGEL BLANKET INSULATION MATERIALS FOR CRYOGENIC APPLICATIONS. Coffman, B. E.; Fesmire, J. E.; White, S.; Gould, G.; Augustynowicz, S. // AIP Conference Proceedings;4/9/2010, Vol. 1218 Issue 1, p913 

    Aerogel blanket materials for use in thermal insulation systems are now commercially available and implemented by industry. Prototype aerogel blanket materials were presented at the Cryogenic Engineering Conference in 1997 and by 2004 had progressed to full commercial production by Aspen...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics