TITLE

Nano surface-modification effect of Si–Ti–C–O fiber on tensile fracture behavior of woven fabric SiC matrix composites

AUTHOR(S)
Mamiya, T.; Kagawa, Y.; Tamura, M.; Sato, M.
PUB. DATE
November 2003
SOURCE
Journal of Materials Science Letters;Nov2003, Vol. 22 Issue 21, p1551
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
This article presents information on tensile fracture behavior of woven fabric SiC matrix composites. The interface properties of SiC fiber-reinforced SiC matrix composites play important roles on the mechanical performance of the composites. The interface properties of the composites have been controlled by coatings on to the fiber surface. The coating is effective because the method allows wide range of the selection of coating material and thickness, thus enables wide range of interface properties.
ACCESSION #
11131291

 

Related Articles

  • Nano surface-modification effect of Si–Ti–C–O fiber on tensile fracture behavior of woven fabric SiC matrix composites. Mamiya, T.; Kagawa, Y.; Tamura, M.; Sato, M. // Journal of Materials Science Letters;Nov2003, Vol. 22 Issue 21, p1551 

    This article presents information on tensile fracture behavior of woven fabric SiC matrix composites. The interface properties of SiC fiber-reinforced SiC matrix composites play important roles on the mechanical performance of the composites. The interface properties of the composites have been...

  • Enhancement of electronic conductivity of LiAl0.3Co0.7O2 via Mg doping. Li, C.; Xu, X.; Wang, C.; Xu, Y.; Xu, W.; Chen, G. // Journal of Materials Science Letters;Sep2003, Vol. 22 Issue 17, p1183 

    The article presents information on the enhancement of electronic conductivity of LiAl0.3Co0.7O2 via Mg doping. Some researchers have suggested that there are two important ways to change the structure of energy bands, and therefore the conductivity of the materials. These are valence...

  • Nano surface-modification effect of Si–Ti–C–O fiber on tensile fracture behavior of woven fabric SiC matrix composites. Mamiya, T.; Kagawa, Y.; Tamura, M.; Sato, M. // Journal of Materials Science Letters;Nov2003, Vol. 22 Issue 21, p1551 

    This article presents information on tensile fracture behavior of woven fabric SiC matrix composites. The interface properties of SiC fiber-reinforced SiC matrix composites play important roles on the mechanical performance of the composites. The interface properties of the composites have been...

  • Nano surface-modification effect of Si�Ti�C�O fiber on tensile fracture behavior of woven fabric SiC matrix composites. Mamiya, T.; Kagawa, Y.; Tamura, M.; Sato, M. // Journal of Materials Science Letters;Nov2003, Vol. 22 Issue 21, p1551 

    This article presents information on tensile fracture behavior of woven fabric SiC matrix composites. The interface properties of SiC fiber-reinforced SiC matrix composites play important roles on the mechanical performance of the composites. The interface properties of the composites have been...

  • Nonwovens as base material for Polibrid-coating at the building industry. Schumann, Anja // Technical Textiles / Technische Textilen;Sep2008, Vol. 51 Issue 3, pE144 

    The goal was to develop a suitable non-woven for application in the building sector and to use it as coating carrier for the humidity drainage of soaked concrete parts with the corrosion protecting coating Polibrid. To drain humidity the structure of the nonwoven is of importance. It was to be...

  • Vapor and water permeabilities and moisture absorbability of organosilicate coatings. G. Buslaev; M. Voronkov; A. Zelenin // Glass Physics & Chemistry;Aug2008, Vol. 34 Issue 4, p492 

    Abstract  A setup was designed for determining the vapor and water permeabilities of coatings and films on porous metal substrates at temperatures of 40°C and higher. The setup was used to determine the vapor and water permeabilities of five organosilicate coatings, namely, OS-51-03...

  • Materials Development for Auxiliary Components for Large Compact Mo/Au TES Arrays. J. Chervenak; F. Finkbeiner; S. Bandler; R. Brekosky; A. Brown; N. Iyomoto; R. Kelley; C. Kilbourne; F. Porter; J. Sadleir; S. Smith // Journal of Low Temperature Physics;Apr2008, Vol. 151 Issue 1/2, p255 

    Abstract  Pursuing the feasibility of scaling conventionally-micromachined transition-edge-sensor (TES) arrays, we have undertaken a study of materials suitable for array integration. A potential limitation of increased pixel count is adequate heatsinking of each detector element...

  • Complex temperature-resistant protective coatings for carbon-carbon materials. V. Zmii; S. Ruden’kii; N. Kartsev; M. Bredikhin // Glass Physics & Chemistry;Feb2009, Vol. 35 Issue 1, p47 

    Abstract  This paper reports on the results of investigations of the development of high-temperature protective coatings on carbon-carbon materials, which are formed through vacuum activated diffusion saturation under conditions of liquid media and self-propagating high-temperature...

  • Combined empirical-analytical method for determining contact radius and indenter displacement during Hertzian indentation on coating/substrate systems. Hsueh Chun-Hway; Miranda, Pedro // Journal of Materials Research;Sep2004, Vol. 19 Issue 9, p2774 

    An analytical model was developed in a previous work to relate the normalized indenter displacement to both the coating-to-substrate Young's modulus ratio and the coating-thickness-to-contact-radius ratio for Hertzian indentation on coating/substrate systems. However, application of this model...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics