Process Modelling, Thermodynamic Analysis and Optimization of Dry Reforming, Partial Oxidation and Auto-Thermal Methane Reforming for Hydrogen and Syngas production

Ayodele, Bamidele V.; Cheng, Chin Kui
December 2015
Chemical Product & Process Modeling;Dec2015, Vol. 10 Issue 4, p211
Academic Journal
No abstract available.


Related Articles

  • Dominant Reaction Pathways in the Catalytic Partial Oxidation of CH4 on Rh. Maestri, Matteo; Vlachos, Dionisios G.; Beretta, Alessandra; Forzatti, Pio; Groppi, Gianpiero; Tronconi, Enrico // Topics in Catalysis;Dec2009, Vol. 52 Issue 13-20, p1983 

    Reforming technologies are at the heart of converting fossil fuels and biofuels to syngas and hydrogen for novel energy applications and, among reforming technologies, catalytic partial oxidation is appealing for decentralized energy production due to the compactness of reactors. Yet, the...

  • Thermo-Catalytic Methane Decomposition: A Review of State of the Art of Catalysts. Ibrahim, Ahmed Aidid; Al-Fatesh, Ahmed Sadeq; Khan, Wasim Ullah; Soliman, Mostafa Ali; AL Otaibi, Raja Lafi; Fakeeha, Anis Hamza // Journal of the Chemical Society of Pakistan;12/31/2015, Vol. 37 Issue 6, p1269 

    The catalytic methane decomposition to produce carbon oxides-free hydrogen and carbon nanomaterial is a promising method feasible for larger production at a moderate cheap price. The produced hydrogen is refined and can be employed straight in fuel cell and in petrochemical industries to produce...

  • Thermodynamic Analysis of Ethanol Dry Reforming: Effect of Combined Parameters. Kale, Ganesh R.; Gaikwad, Tejas M. // ISRN Otolaryngology;2014, p1 

    The prospect of ethanol dry reforming process to utilize CO2 for conversion to hydrogen, syngas, and carbon nanofilaments using abundantly available biofuel--ethanol, and widely available environmental pollutant CO2 is very enthusiastic. A thermodynamic analysis of ethanol CO2 reforming process...

  • Swarm intelligence for multi-objective optimization of synthesis gas production. Ganesan, T.; Vasant, P.; Elamvazuthi, I.; Ku Shaari, Ku Zilati // AIP Conference Proceedings;Nov2012, Vol. 1499 Issue 1, p317 

    In the chemical industry, the production of methanol, ammonia, hydrogen and higher hydrocarbons require synthesis gas (or syn gas). The main three syn gas production methods are carbon dioxide reforming (CRM), steam reforming (SRM) and partial-oxidation of methane (POM). In this work,...

  • Evaluation of the economic and environmental impact of combining dry reforming with steam reforming of methane. Gangadharan, Preeti; Kanchi, Krishna C.; Lou, Helen H. // Chemical Engineering Research & Design: Transactions of the Inst;Nov2012, Vol. 90 Issue 11, p1956 

    Lately, there has been considerable interest in the development of more efficient processes to generate syngas, an intermediate in the production of fuels and chemicals, including methanol, dimethyl ether, ethylene, propylene and Fischer-Tropsch fuels. Steam methane reforming (SMR) is the most...

  • Hydrogen production in a reversible flow filtration combustion reactor. Dmitrenko, Yu.; Klevan, P. // Journal of Engineering Physics & Thermophysics;Oct2011, Vol. 84 Issue 6, p1296 

    The noncatalytic process of syngas production by means of partial oxidation of methane by air oxygen in a reversible flow filtration combustion reactor has been investigated experimentally. We have investigated the influence of the equivalent ratio and the specific mass flow of the fuel mixture...

  • Energy Analysis in Combined Reforming of Propane. Moon, K.; Kale, Ganesh R. // Journal of Engineering (2314-4912);2013, p1 

    Combined (steam and CO2) reforming is one of the methods to produce syngas for different applications. An energy requirement analysis of steam reforming to dry reforming with intermediate steps of steam reduction and equivalent CO2 addition to the feed fuel for syngas generation has been done to...

  • Influence of the presence of ruthenium on the activity and stability of Co-Mg-Al-based catalysts in CO reforming of methane for syngas production. Gennequin, Cédric; Hany, Sara; Tidahy, Haingomalala; Aboukaïs, Antoine; Abi-Aad, Edmond; Aouad, Samer; Estephane, Jane // Environmental Science & Pollution Research;Nov2016, Vol. 23 Issue 22, p22744 

    Hydrogen production by methane dry reforming is an important yet challenging process. A performing catalyst will favor the thermodynamic equilibrium while ensuring good hydrogen selectivity. We hereby report the synthesis of CoMgAl (with x = 2 and 6) mixed oxide catalysts synthesized via...

  • Feeding of Oxygen Along the Height of a Circulating Fast Fluidized Bed Membrane Reactor for Efficient Production of Hydrogen. Abashar, M. E. E.; Elnashaie, S. S. E. H. // Chemical Engineering Research & Design: Transactions of the Inst;Nov2007, Vol. 85 Issue 11, p1529 

    The coupling of steam and oxidative reforming of methane has been studied in a circulating fast fluidized bed membrane reactor (CFFBMR). The concept of oxygen distribution has been investigated by employing discrete injection points along the length of the reformer. The addition of oxygen is to...

  • WATER-ENHANCED REFORMING OF SYNGAS TO FUELS AND CHEMICALS IN A BATCH REACTOR. Je-Lueng Shie; Ching-Yuan Chang; Chin-Ching Tzeng; Pei-Yao Hung; Chia-Chi Chang; Sheng-Wei Chiang; Jyi-Yeong Tseng; Wen-Kai Tu; Min-Hao Yuan; Heng-Yi Li; Yuh-Jenq Yu // Journal of Environmental Engineering & Management;May2010, Vol. 20 Issue 3, p181 

    The article presents a study on the reformation of sythesized gas into chemicals and fuels inside a batch reactor. The study used gas chromatography (GC) to analyze the resulting hydrogen2, carbon monoxide (MO), and carbon dioxide (CO2) from hydro-syngas reforming (SR) (HSR process) and dried SR...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics