TITLE

Effect of Preliminary Heating of the Binder on the Quality of Glass Composite Pultrusion Rods

AUTHOR(S)
Grigor'ev, S.; Krasnovskii, A.; Kazakov, I.
PUB. DATE
November 2015
SOURCE
Glass & Ceramics;Nov2015, Vol. 72 Issue 7/8, p299
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Amathematical model based on Darcy's law for determining the pressure in the entry part of a die during fabrication of large-size composite rods, obtained by pultrusion based on glass fibers, is presented. The effect of preheating of the glass-fibers - binder system and the pressure inside the entry section of the die is shown and the maximum possible rates of pultrusion with different preheating temperatures are determined.
ACCESSION #
110861184

 

Related Articles

  • Correlation between dynamic nonlinearity and static mechanical properties of corroded E-glass reinforced polyester composites. Van Den Abeele, K.; Van de Velde, K. // AIP Conference Proceedings;2000, Vol. 509 Issue 1, p1359 

    Glass-fiber reinforced plastics degrade in different manners when exposed to chemical environments. Migration of chemicals into the matrix results in absorption, chemical reaction, plastization, and dissolution of the matrix. Furthermore, the chemicals cause degradation of the glass fiber itself...

  • Effect of ceramic coatings on the sound absorption of heat-shield materials. Solntsev, S.; Rozenenkova, V.; Mironova, N. // Glass & Ceramics;Sep2012, Vol. 69 Issue 5/6, p200 

    Heat-and-sound absorbing materials and a technology for fabrication, deposition and formation of ceramic coatings, which makes it possible to obtain glass ceramic heat-and-sound absorbing materials with coatings whose properties can be regulated, have been developed. It is shown that ceramic...

  • Finite Element Analysis (FEA) Applied to Heat Transfer Optimization Process of Pultrusion Die Systems. Silva, F. J. G.; Ferreira, F.; Costa, C.; Castro, A. C. Meira; Meixedo, J. P.; Castro, M. R.; Santos, R. P. C.; Ribeiro, M. C. S.; Fiúza, A.; Dinis, M. L. // World Academy of Science, Engineering & Technology;Jun2011, Issue 54, p270 

    No abstract available.

  • E-glass fiberglass flywheels for low-cost energy storage.  // American Ceramic Society Bulletin;Jun/Jul2013, Vol. 92 Issue 5, p14 

    The article reports on the potential of e-glass, a fiberglass composites, as a choice for a high-technology energy storage system.

  • Investigation of impregnation fibrous materials in pultrusion process of polymer composite materials. Grigoriev, S. N.; Krasnovskii, A. N.; Kvachev, K. V. // International Polymer Science & Technology;2014, Vol. 41 Issue 7, pT/59 

    In this article the results of theoretical investigation of fibers impregnation in manufacturing high filled composite by pultrusion are represented. A criterion is maximum intention of technological process. An analytical investigation of intention depending on main physical factors is proposed.

  • Low-cost silica textiles for glass furnace insulation.  // Ceramic Industry;Sep96, Vol. 146 Issue 10, p59 

    Describes a manufacturing process which produces glass fibers that can be used as thermal insulators for glass furnaces. Types of glass fibers; Processes for textile fibers; Properties and applications of the textile silica product.

  • Doing something about the weather: A brief history of fiber glass insulation. Crane, Angus E. // RSI: Roofing, Siding, Insulation;Feb2002, Vol. 79 Issue 2, p52 

    Presents a history and important information on fiber glass insulation. Physical properties of fiber glass; Growth of insulation sales and the fiber glass-industry; Consideration of the practicality, availability and cost-effectiveness of fiber glass insulation.

  • Delivery of femtosecond pulses by flexible hollow fibers. Matsuura, Yuji; Miyagi, Mitsunobu; Shihoyama, Kazuhiko; Kawachi, Masako // Journal of Applied Physics;1/15/2002, Vol. 91 Issue 2, p887 

    A flexible, hollow glass fiber is proposed as a delivery medium of femtosecond pulses. It was shown that ultrashort pulses with a pulse width of 196 fs, energy of 700 μJ, and repetition rate of 1 kHz are transmitted by the hollow fibers with no damage on the fiber. In the fiber with an inner...

  • The effect of a new formaldehyde-free binder on the dissolution rate of glass wool fibre in physiological saline solution. Potter, Russell M.; Olang, Nassreen // Particle & Fibre Toxicology;2013, Vol. 10 Issue 1, Special section p1 

    The in-vitro dissolution rate of fibres is a good predictor of the in-vivo behavior and potential health effects of inhaled fibres. This study examines the effect of a new formaldehyde-free carbohydrate-polycarboxylic acid binder on the invitro dissolution rate of biosoluble glass fibres....

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics