TITLE

A study on ultrasonic torsional vibration-assisted abrasive waterjet polishing of ceramic materials

AUTHOR(S)
Yong Wang; Hongtao Zhu; Chuanzhen Huang; Jun Wang; Peng Yao
PUB. DATE
May 2015
SOURCE
Advanced Materials Research;2015, Vol. 806, p400
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Abrasive waterjet machining is considered as a promising technique in hard-brittle material polishing. In this paper, The ultrasonic torsional vibration is considered to apply on the workpiece to improve the abrasive waterjet polishing quality and efficiency. The process parameters in the ultrasonic torsional vibration-assisted abrasive waterjet polishing are optimized. The ultrasonic torsional vibration in the role of the abrasive waterjet polishing is investigated. The results show that the application of ultrasonic torsional vibration can effect of abrasive particle movement and increase the critical depth of the ceramic materials.
ACCESSION #
110788076

 

Related Articles

  • A study on ultrasonic torsional vibration-assisted abrasive waterjet polishing of ceramic materials. Yong Wang; Hongtao Zhu; Chuanzhen Huang; Jun Wang; Peng Yao // Advanced Materials Research;2016, Vol. 1136, p400 

    Abrasive waterjet machining is considered as a promising technique in hard-brittle material polishing. In this paper, The ultrasonic torsional vibration is considered to apply on the workpiece to improve the abrasive waterjet polishing quality and efficiency. The process parameters in the...

  • Ultrasonic Machining. Chinnakaruppan, Palani; Fote, Thomas A. // Ceramic Industry;Mar2008, Vol. 158 Issue 3, p14 

    The article explores the use of ultrasonic machining (UM) in producing engineered ceramic materials. Considered as a mechanical material removal process, UM can be utilized for machining both conductive and non-metallic materials. An overview of the principles of UM is provided, along with a...

  • Torsional vibrations of piezoceramic hollow cylinders with circular polarization. Loza, I. // Journal of Mathematical Sciences;Jan2012, Vol. 180 Issue 2, p146 

    A problem of natural torsional vibrations of hollow piezoceramic cylinders is considered. The piezoceramic is polarized in the circular direction. The lateral surfaces of the cylinder are covered with shortcircuited thin electrodes. The method of solution of the problem is based on the...

  • An analytical model of rotary ultrasonic milling. Bertsche, Erich; Ehmann, Kornel; Malukhin, Kostyantyn // International Journal of Advanced Manufacturing Technology;Apr2013, Vol. 65 Issue 9-12, p1705 

    Rotary ultrasonic machining is currently being used as a manufacturing method for advanced ceramic materials, but its complexity has hindered its acceptance in industry. For this technology to gain wider acceptance, it must first be scientifically better understood. The majority of published...

  • Study on the Specific Energy Characteristics of the Ultrasonic Vibration Assisted Sawing Ceramic. Wang Jiangquan; Shen Jianyun; Li Zhengcai; Xu Xipeng // Advanced Materials Research;2015, Vol. 806, p394 

    Ultrasonic vibration improved the machining performance of a variety of brittle materials, and achieved good results in brittle materials machining applications. In this paper, the experiment about precision sawing engineering ceramic by using a thin diamond blade with and without ultrasonic...

  • DESIGN OF COMPOSITE FIXTURE FOR MACHINING CERAMIC MATERIALS USING ABRASIVE WATER JET MACHINING (AWJM). Elsen, S. Renold; Ramesh, T.; Kumar, M. Thirumalai; Khan, A. Aslam // Journal of Engineering & Applied Sciences;Apr2014, Vol. 9 Issue 4, p388 

    The conventional machining of ceramic components is a hard task because of its brittle nature. Water jet machining is one among the non-conventional machining processes which is suitable for machining of ceramics. In this work, a fixture is developed to cut ceramics rods each of diameter varying...

  • Ford Wrestles With 'Torsional Excitations.'. Murphy, Tom // Ward's Auto World;May2011, Vol. 47 Issue 5, p18 

    The article reports that Ford is considering the use of dual-mass flywheel (DMF) to address the issue of torsional excitations.

  • "Too Hard" Is Just Right. Zelinski, Peter // Modern Machine Shop;Feb2005, Vol. 77 Issue 9, p92 

    Focuses on the application of ultrasonic machining technology to the manufacturing processes of BC Instruments. Frequency vibration of a diamond-covered tool in ultrasonic machining; Advantages of ultrasonic machining to high-speed machining of ceramic parts; Features of computer numerical...

  • High-performance ultrasonic tool. Jordan, John M.; Bradbury, Johanna L. // Modern Machine Shop;Oct97, Vol. 70 Issue 5, p264 

    Reports on the availability of the Ultra-Sonic Cutter, a high-performance ultrasonic tool that allows the efficient cutting of a variety of materials for industrial applications. Dimensions; Features; Manufacturer; Contact information.

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics