A Study on Wear Behaviour of NiCrBSi Flame Sprayed Coatings

PAULIN, Constantin; CHICET, Daniela; ISTRATE, Bogdan; AVRAM, Petru; MUNTEANU, Corneliu
May 2015
Advanced Materials Research;2015, Vol. 1128, p332
Academic Journal
The present study is an attempt to observe and evaluate the dry rolling wear behavior [1] of three types of Ni-base coatings on an Amsler type wear machine, against low-alloyed steel discs. The tested coatings were obtained by flame spraying (on the same low-alloyed steel substrate as the discs) using commercial Ni-base self-fluxing powders: 1060-00 and 1355-20 type (manufactured by Hoganas) and JK 586 type (manufactured by Deloro Stelite Co). In order to increase the strength of the layers, the deposition was followed by fusing [2]. The tests were conducted on pairs of coated -- uncoated discs at the same load and the same speed in all three cases. In order to evaluate the wear behavior, there were observed and measured the surface roughness and the rolling path profiles. A severe wear regime with adhesion as the main phenomenon was observed in case of the low-alloyed steel discs.


Related Articles

  • The effect of Al2O3-SiO2 mixing ratio as steel coating S45C to the thermal and adhesiveness characteristic with flame spray method for rocket nozzle application. Widyastuti; Kukuh, W. W.; Putrawan, M. A.; Alvian, T. W.; Ridwan, S. // AIP Conference Proceedings;Sep2013, Vol. 1555 Issue 1, p75 

    Nozzle is one part of rocket which works at high temperatures. The S45C steel is applied for material base of nozzle. This material was coated by Thermal barrier coating (TBC) of Al2O3-SiO2. The mixing ratio of ceramic oxide were 80% Al2O3 - 20% SiO2; 70% Al2O3 - 30% SiO2, and 60% Al2O3 - 40%...

  • Comparative Characteristic and Erosion Behavior of NiCr Coatings Deposited by Various High-Velocity Oxyfuel Spray Processes. Sidhu, Hazoor Singh; Sidhu, Buta Singh; Prakash, S. // Journal of Materials Engineering & Performance;Dec2006, Vol. 15 Issue 6, p12 

    The purpose of this study is to analyze and compare the mechanical properties and microstructure details at the interface of high-velocity oxyfuel (HVOF)-sprayed NiCr-coated boiler tube steels, namely ASTM-SA-210 grade A1, ASTM-SA213-T-11, and ASTM-SA213-T-22. Coatings were developed by two...

  • Combating Corrosion Degradation of Turbine Materials Using HVOF Sprayed 25% (Cr3C2-25(Ni20Cr)) + NiCrAlY Coating. Jegadeeswaran, N.; Ramesh, M. R.; Bhat, K. Udaya // International Journal of Corrosion;2013, p1 

    High velocity oxy fuel process (HVOF) is an advanced coating process for thermal spraying of coatings on to components used in turbines. HVOF process is a thermal spray coating method and is widely used to apply wear, erosion, and corrosion protective coatings to the components used in...

  • Effect of TiN coating on corrosion resistance of dental NiCr alloy. HU Bin; CHEN Jie // Shanghai Journal of Stomatology;Feb2009, Vol. 18 Issue 1, p73 

    PURPOSE: To investigate the effect of titanium nitride coating on corrosion resistance of NiCr alloy in the simulate oral environment. METHODS: The NiCr alloy commonly used for porcelain crown was cast with specimen size of 10mmx10mmx3mm. Then the specimen was coated with a thickness of 2.5µm...

  • Influence of Laser Power on the Microstructure and Anti-Wear Performance of Laser Hybrid Plasma Spraying NiCr-Cr3C2 Coatings. Shuqing Li; Shunhua Liu; Qilian Li; Yuping Duan // Advanced Materials Research;2014, Vol. 1015, p119 

    The NiCr-Cr3C2 coatings were deposited on 38CrMoAl substrate by a laser hybrid plasma spraying (LHPS) technology in this study. The coatings' microstructures and anti-wear performances with different laser power were characterized using an optical microscope, a scanning electron microscope, and...

  • The effect of different metal surface grindings in the metal-ceramic bond strength. Bagis, Bora; Oztas, D. Derya // Internet Journal of Dental Science;2009, Vol. 6 Issue 2, p15 

    Purpose: This study aims to compare the bond strength of Ni-Cr alloys to ceramic after different types of grindings. Materials and Methods: 20 specimens made of Ni-Cr alloys were divided into two groups. The first group of specimens was grinded with a carbide bur (EL5, SS White Burs Inc,...

  • Delayed Crack Development in Porcelain Due to Incompatibility Stress. ANUSAVICE, K. J.; DEHOFF, P. H.; GRAY, A.; LEE, R. B. // Journal of Dental Research;Aug1988, Vol. 67 Issue 8, p1086 

    Delayed failure of metal-ceramic restorations due to static fatigue can occur when residual tensile stress is present in porcelain, even in the absence of intra-oral forces. Fixed-partial-denture (FPD) specimens and semicircular arch specimens with gapped cross-arch segments were employed to...

  • Obtainment of a NiCrNbC Alloy by Mechanical Alloying. da Silva, Alisson K.; Cintho, Osvaldo M.; Capocchi, José D. T. // Materials Science Forum;2014, Vol. 802, p35 

    The present work investigate the possibility of obtainment by mechanical alloying of Ni superalloys based on the Ni-Cr-Nb-C system strengthened by γ"(Ni3Nb), since γ"(Ni3Nb) as γ' (Ni3Al) are typical coherent phase strengthening mechanisms in nickel superalloys. In order to evaluate...

  • Whanghae Precision/South Korea.  // Wire Journal International;Jun2010, Vol. 43 Issue 6, p64 

    The article features Whanghae Precision, a South Korean-based company which offers various spray coating technologies including thermal, powder flame, and plasma spray coatings.


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics