TITLE

Research on GTAW/ SMAW Weldability of ADI/DI Using Electrodes ENi-Cl and ENiFe-Cl-A

AUTHOR(S)
Ioan Catalin, MON; Mircea Horia, TIEREAN; Adel, NOFAL
PUB. DATE
May 2015
SOURCE
Advanced Materials Research;2015, Vol. 1128, p242
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The present research is dedicated to weldability of Austempered Ductile Iron (ADI) and Ductile Iron (DI) using Shielded Metal Arc Welding (SMAW) and Gas Tungsten Arc Welding (GTAW) methods. The welds were done using the arc welding process with Nickel base filler materials: ENi-Cl and ENiFe-Cl-A. Each weldment was examined visually, with X-rays and mechanical tests. After the mechanical tests, tensile test and impact properties of the welded joint are lower than mechanical properties of the ADI base material using ENiFe-Cl-A filler metal and GTAW process. This type of filler metal ENiFe-Cl-A can be applied successfully only for repair by welding of ADI parts. Using ENi-Cl filler metal with GTAW process applied to DI, the mechanical tests, tensile test and hardness of the welded joint are greater than mechanical properties of the DI base material. This procedure can be applied for welding. In case on DI welded using SMAW with ENi-Cl electrodes, the hardness of the welded joint is lower than the hardness of base material. This procedure can be applied only for repair by welding.
ACCESSION #
110787990

 

Related Articles

  • HOBART CERTIFICATE LENDS CREDIBILITY.  // World of Welding;Winter2006, p6 

    The article discusses the specialized training certificate awarded to DC1 Jim Pals by Hobart Welding Institute of Welding Technology in December 2006. Jim Pals, a welding instructor for the U.S. Coast Guard Academy Mechanical Engineering Department, believes that the Hobart Institute certificate...

  • OF A MOUNTAIN MORNING.  // World of Welding;Spring2013, p11 

    The article focuses on artist Catherine Murphy. Murphy concentrated on structural shielded metal arc welding and gas tungsten arc welding at Hobart Institute. She says that attending craft workshops and welding schools has led her to the beauty of copper. Murpha established the art studio Haw...

  • Machines with AC Pulsing Weld Thin Aluminum.  // Welding Journal;Dec2013, Vol. 92 Issue 12, p22 

    The article offers brief information on the Heliasrc, gas tungsten arc welding (GTAW), shielded metal arc welding (SMAW) machine from Esab Welding & Cutting Products Inc.

  • Strategies for Controlling Welding Fumes at the Source - A Review. Mohan, Sreejith; Sivapirakasam, S. P.; Bineesh, P.; Satpathy, K. K. // Applied Mechanics & Materials;2014, Issue 592-594, p2539 

    Exposure to welding fumes and its related hazards has always been a matter of serious concern. The mass and composition of fumes from welding depends on several factors. A detailed knowledge of these factors is necessary for understanding the mechanism of fume formation and developing suitable...

  • The Effect of Shielded Metal Arc and Gas Tungsten Arc Welding Methods on 308L Stainless Steel Weldments. Shao-Pin Lin; Ge-Ping Yu; Huang, J. Y.; Chen, H. J.; Kuo, R. C.; E-Wen Huang; Jia-Hong Huang // Materials Science Forum;2014, Vol. 783-786, p2753 

    Shielded metal arc (SMA) and gas tungsten arc (GTA) weldments were investigated to study the welding effects on the mechanical behavior of 308L austenitic stainless steel weldments, respectively. Both SMA and GTA weldments showed dendritic microstructure. The observed austenitic stainless steel...

  • ’’Worth Every Nickel’’. Rowlands, Roy; Jordinson, Paul; Godfre, Dave // Welding & Cutting;2019, Issue 3, p204 

    No abstract available.

  • Welder.  // Techniques: Connecting Education & Careers;May2011, Vol. 86 Issue 5, p58 

    The article offers information on the process that permanently joins metal parts together with the application of heat to the pieces of metal, melting and fusing them to form a bond, to which welders in the U.S. engaged. It states that the common processes of joining metal parts together include...

  • JOE PAWLEY PROVIDES FOCUSED WELDING PROGRAM IN CHALLENGING TIMES.  // World of Welding;Spring2010, p7 

    The article presents information on a welding program by Harrison County Area Technology Center in Cynthiana, Kentucky. Since its inception, the program, which provides a background in the basics of oxyacetylene, shielded metal arc, gas metal arc, and gas tungsten arc welding, has graduated more...

  • 316L PASLANMAZ ÇELÄ°K Ä°LE BAKIR LEVHALARIN ÖRTÃœLÃœ ELEKTROD VE TIG KAYNAK YÖNTEMÄ° Ä°LE BÄ°RLEÅžTÄ°RÄ°LEBÄ°LÄ°RLÄ°G& x0130;NÄ°N ARAÅžTIRILMASI Kahraman, Nizamettin; Durgutlu, Ahmet // Teknoloji;Jan-Mar2005, Vol. 8 Issue 1, p43 

    In this study, copper and stainless steel plates were welded through shielded metal arc and tungsten arc welding processes using additional metal/electrode of the same composition. Some properties of the welded specimen were investigated. Various mechanical tests (tensile, bending and hardness)...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics