TITLE

The Elastic Modulus and Poisson's Ratio of Laminated Bamboo Guadua angustifolia

AUTHOR(S)
Takeuchi, Caori P.; Estrada, Martin; Linero, Dorian L.
PUB. DATE
March 2016
SOURCE
Key Engineering Materials;2016, Vol. 668, p126
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Laminated bamboo is a natural composite material with cellulose fibers, parenchyma cells, and vascular bundles. The mechanical characterization of this material includes not only the determi- nation of its strength, but also of its elastic constants. Given the anisotropic nature of the laminated material, compression tests were performed on three groups of specimens. The elastic modulus in the load direction and the Poisson's ratio were determined, and the results showed that the material's physical anisotropy causes an anisotropic mechanical behavior. The average values obtained for the elastic modulus ranged from 30044 MPa for group 1 to 265 MPa for group 2. The results of the test to determine the Poisson's ratio in compression perpendicular to the fibers, ranged from 0.013 to 0.278 whereas those obtained in compression parallel to the fibers, ranged from 0.621 to 1.506.
ACCESSION #
110377650

 

Related Articles

  • Comparative study on the effect that coir fibers have on the dynamic or quasi-static elastic moduli of glass fiber laminates obtained by the vacuum bag technique. Villalón, Mario; Vega, Hugo; Montoya, Nahary; Rubio, Byron; Hernandez, Julio; Mendoza, Omar; Salas-Zuñiga, Roberto; Reyes-Zamora, Ulises; Radillo, Rodolfo; Reyes-Araiza, J. L.; Manzano-Ramírez, A. // Key Engineering Materials;2016, Vol. 668, p137 

    The use of natural fibers has a great interest due to their damping properties, low density and moderate strength. The effect of incorporating chopped natural fibers, as disperse reinforced phase, on the dynamic or quasi-static elastic modulus of glass fiber laminates is presented. Squares of 32...

  • FEASIBILITY OF USING MDP PANELS, COMPARED TO CONVENTIONAL PARTICLEBOARDS. Ribeiro Guimarães, Bárbara Maria; Guimarães Junior, José Benedito; Barbosa Campomori, Jefferson; Farinassi Mendes, Rafael; Marin Mendes, Lourival // Key Engineering Materials;2016, Vol. 668, p145 

    The objective of this study was to investigate, by physical properties, the efficiency of MDP panels, compared to conventional particleboards, since MDP was considered as a raw material for the manufacture of these panels. MDP panels had the following composition: 20/60/20 face/core; a...

  • Rational design of soft mechanical metamaterials: Independent tailoring of elastic properties with randomness. Mirzaali, M. J.; Hedayati, R.; Vena, P.; Vergani, L.; Strano, M.; Zadpoor, A. A. // Applied Physics Letters;7/26/2017, Vol. 111 Issue 5, p1 

    The elastic properties of mechanical metamaterials are direct functions of their topological designs. Rational design approaches based on computational models could, therefore, be used to devise topological designs that result in the desired properties. It is of particular importance to...

  • 1370. An FBG staged monitoring method for carbon fiber reinforced plastics composite fracture status based on modulus/strain wave coupling property. Hong-yue Liu; Da-kai Liang; Xiao-lin Han; Shen Rui // Journal of Vibroengineering;Sep2014, Vol. 16 Issue 6, p2735 

    From the sensitivity of the FBG center wavelength changing with the macro-elastic modulus and the instantaneous fracture strain wave on the surface of carbon fiber reinforced plastics (CFRP) composite, we investigate the correlation between the macro-elastic modulus (the changing rate of the FBG...

  • Study of the potential employment of Malvaceae Species in composites materials. Gama Guimarães, Bárbara Maria; Cayuela Marín, Diana; Fernando Zonatti, Welton; Mantovani, Waldir; Relvas, Cátia; Cunha, Fernando; Fangueiro, Raul; Savastano Júnior, Holmer; Baruque-Ramos, Júlia // Key Engineering Materials;2016, Vol. 668, p75 

    The employ of vegetal fibers for textiles and composites represents a great potential in economic and social sustainable development. Some Malvaceae species are considered tropical cosmopolitans, such as from Sida genus. Several species of this genus provide excellent textile bast fibers, which...

  • Synthesis Of Silver Nanoparticles With Potential Antifungical Activity For Bamboo Treatment. Pandoli, Omar; Ventura Pereira-Meirelles, Fatima; Lobo Lobo Luz, Eric Monteiro; Assumpção, Aline; dos Santos Martins, Raquel; del Rosso, Tommaso; Ghavami, Khosrow // Key Engineering Materials;2016, Vol. 668, p86 

    To increase the durability of bamboo it is important to find an easy method to fill the micro and meso structure of the biological matrix using a nano-structural material with an anti- fungical activity. A colloidal solution of silver nanoparticle (Ag-NPs) is a dispersion of metal nanoparticle...

  • Sheath bamboo leaves used at high pressure architect. GARCIA, Juliana; JOHN, Vanderley // Key Engineering Materials;2016, Vol. 668, p92 

    Sheath bamboo leaves (SBL) are potential lignocelluloses waste, aimed to produce laminated architectonic coatings. In this work was studied the surface interaction among the SBL and three types of adhesive: Polyvinyl Acetate (PVAc), Castor oil Polyurethane Adhesive bi- component (Vegetal PU),...

  • Analysis of fiber reinforced laminated timber beams. Abade Bertoline, Carlos Augusto; Tadeu Mascia, Nilson; Donizeti Basaglia, Cilmar; Fazendeiro Dodadon, Bruno // Key Engineering Materials;2016, Vol. 668, p100 

    The necessity to restore the design specifications of a determined structure, combined with cost, weight and environmental impact reduction makes the use of high performance composite systems, involving, either synthetic or natural materials, interesting. By applying a layer of fiber...

  • Effect of natural fiber hornification on the fiber matrix interface in cement based composite systems. Rocha Ferreira, Saulo; de Andrade Silva, Flávio; Lopes Lima, Paulo Roberto; Toledo Filho, Romildo Dias // Key Engineering Materials;2016, Vol. 668, p118 

    Several fiber treatments can be applied to mitigate the high water absorption of vegetal fibers. Wetting and drying cycles are usually performed in the industry of paper and cellulose to reduce the volume variation of the natural fibers. This procedure stiffens the polymeric structure of the...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics