TITLE

Experimental and Modelling of Constitutive Equation of Polycarbonate Material

AUTHOR(S)
Haitao Liu; Neng Chen; Yazhou Sun
PUB. DATE
January 2016
SOURCE
Key Engineering Materials;2016, Vol. 667, p286
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
In this paper, according to the principle of building the constitutive model of polymer material, the one-dimensional structure of the ZWT material constitutive model is added to dashpot element in parallel, and in which strain rate and coefficient of viscosity is introduced and the nonlinear viscoelastic constitutive model of Polycarbonate material is achieved. Additionally, tensile test at low strain rate and Hopkinson test at high strain rate of polycarbonate material are carried out, and the change rule of yield strength of polycarbonate material is obtained both at high strain rate and low strain rate. According to the experimental data, the parameters of the constitutive model have been optimized and fitted using ant colony algorithm, and then the fitted results are compared with experimental results. The comparative results show that the improved ZWT constitutive model can reasonably represent the nonlinear characteristics of polycarbonate material at different strain rate.
ACCESSION #
110337510

 

Related Articles

  • Rheological Behaviour and Model for Porous Rocks Under Air-Dried and Water-Saturated Conditions. Okubo, S.; Fukui, K.; Gao, X. // Open Civil Engineering Journal;2008, Vol. 2, p88 

    Most rocks exhibit viscoelastic properties or time-dependent behavior during deformation. For example, peak strength and Young's modulus increase with loading rate in uniaxial compression tests. In the creep test, strain increases over time even though stress is maintained at a predetermined...

  • Phase Behavior and Ternary Diagram Construction for Membrane Forming Polycarbonate Solutions. Idris, Alamin; Man, Zakaria B.; Maulud, Abdulhalim Shah; Gilassi, Sina // Applied Mechanics & Materials;2014, Issue 625, p7 

    Cloud points at different polymer concentrations were obtained by the simple titration method and compared with the numerically calculated theoretical binodal curves for Polycarbonate/Dimethylacetamide/Water (PC/DMAc/Water) and Polycarbonate/iV-Methyl-2-pyrrolidone/Water (PC/NMP/Water). The...

  • Improving Hair Color Retention Using Quat Functional Olefin-graft Polymers. Cincotta, Joseph J. // Cosmetics & Toiletries;Oct2008, Vol. 123 Issue 10, p73 

    Formulations containing quaternary-modified olefin-graft polymers are shown here to improve the permanency of artificial hair colorant in human hair exposed to repeated washing. In addition, when these polymers were applied to hair by a sulfate-based shampoo, the foam height and viscosity of the...

  • Simulation of the plastic behavior of amorphous glassy bis-phenol-A-polycarbonate. Fortunelli, Alessandro; Geloni, Claudio; Lazzeri, Andrea // Journal of Chemical Physics;9/8/2004, Vol. 121 Issue 10, p4941 

    A protocol for studying the plastic deformation of amorphous glassy polymers is presented. The protocol is based on a viable computational procedure which combines constant-stress molecular dynamics simulations and fixed-cell energy minimizations, followed by kinetic, configurational, and energy...

  • polycarbonate.  // Taber's Cyclopedic Medical Dictionary;2005, p1723 

    A definition of the term "polycarbonate" is presented. It refers to a transparent polymer which is used for manufacturing eye protectors, shields, and other medical devices.

  • Modeling a tethered polymer in Poiseuille flow. Webster, M. A.; Yeomans, J. M. // Journal of Chemical Physics;4/22/2005, Vol. 122 Issue 16, p164903 

    We investigate the behavior of a tethered polymer in Poiseuille flow using a multiscale algorithm. The polymer, treated using molecular dynamics, is coupled to a solvent modeled by the stochastic rotation algorithm, a particle-based Navier–Stokes integrator. The expected series of...

  • Melt Flow Rate Testing -- Part 1. sepe, mike // Plastics Technology;Jul2013, Vol. 59 Issue 7, p16 

    The article focuses on melt flow rate (MFR) testing of polymers. It argues on the usefulness of the MFR value in gauging the performance of polymers. It discusses the correlations of flow rate, viscosity, and molecular weight of a polymer and their importance for practitioners in injection...

  • Metastable state of amphiphilic polysaccharide solutions. Simon, Sébasfien; Mocanu, Georgefa; Picton, Luc; Cerf, Didierle; Muller, Guy // e-Polymers;Jun2004, p1 

    Abstract: This communication reports the time-dependent viscometric behaviour of amphiphilic pullulan (with varied amount of grafted octyl groups, C8) solutions as a function of age and temperature. For lower C8 amount, no ageing effects were observed. With high amount of octyl-bearing groups,...

  • Synthesis and characterization of novel optically active poly(ester-imide-imine)s. Hajipour, Abdol Reza; Roosta, Parniyan; Zahmatkesh, Saeed; Ruoho, Arnold E. // e-Polymers;Feb2009, p1 

    N,N′-(3,3′,4,4′-Benzophenonetetracarboxylic)-3,3′,4,4′-diimido-di-L-amino acids (1a-1d) and N,N′-pyromelliticdiimido-di-L-amino acids (2a-2d) are prepared from the reaction of 3,3′,4,4′-benzenetetracarboxylic-3,3′,4,4′-dianhydride or...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics