TITLE

Study on the Preparation of Bamboo Plastic Composite Intend for Additive Manufacturing

AUTHOR(S)
Daxu Zhao; Xian Cai; Guozhong Shou; Yuqi Gu; Peixin Wang
PUB. DATE
January 2016
SOURCE
Key Engineering Materials;2016, Vol. 667, p250
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
As a new kind of manufacturing technology developing rapidly, Material Increasing Manufacturing, scilicet 3D printing technology is that the popularity of various fields. In this paper, under the background of the desktop 3D printing gradually enter the family. To solve the printing material problem scilicet 3D printing technology development bottleneck, come up with a bamboo-plastic composite made of Bamboo powder and poly lactic acid (PLA), can be used on desktop 3D printing. Due to bamboo resources is abundant, low cost, and also have the advantages of friendly of environment, have a good potential for development. In this paper, the right formula is used in the study on preparation of materials, through the material blending; extrusion process to produce the 3D printing wire can meet the requirements. Through further studies on the ratio of bamboo and plastic, the amount of additives added, extrusion processing temperature and material situation, optimizing the ratio of bamboo and plastic, the amount of Additives, adjust the extrusion temperature in the formulation. Tests showed that through the improved technology, wires have further enhanced performance, continuous printing more than 300 meters, the printing effect is smooth, jam does not appear, and the molded parts have good quality.
ACCESSION #
110337505

 

Related Articles

  • Thermal Spray: An Ally of 3D Printing. FOY, PETER; MOODY, DALE // Welding Journal;Aug2015, Vol. 94 Issue 8, p40 

    The article discusses role of thermal spray to 3D printing capabilities. It mentions array of manufacturing terms including rapid prototyping, additive manufacturing and subtractive manufacturing. Topics discussed includes stereolithography, process for producing molds using a thermal spray gun...

  • Additive manufacturing--Turning manufacturing inside out. Wray, Peter // American Ceramic Society Bulletin;Apr2014, Vol. 93 Issue 3, p17 

    The article traces the development of rapid prototyping, 3 Dimensional printing or additive manufacturing (AM) in the fields of ceramic and glass. Interest in AM was fueled by materials researchers, manufacturers and artists in the 1990s and branched into major strands including...

  • 3D PRINTING. Oxford, Adam // Stuff;Apr2015, p110 

    The article offers information on three-dimensional (3D) printing, from the basics to learning the lingo.

  • ECOLOGICAL PLA PLASTIC USED FOR FDM RAPID PROTOTYPING TECHNOLOGY. Beniak, Juraj; Kri┼żan, Peter; Matus, Milos; Svatek, Michal // Proceedings of the International Multidisciplinary Scientific Ge;2015, Vol. 4, p117 

    Rapid Prototyping Systems are widely used in every field of our industry. For model prototyping from plastic material are used Fused Deposition Modeling, one of Rapid Prototyping Technology. This systems are working with plastic wires and typical plastic material is ABS (Acrylonitrile butadiene...

  • Applications of 3D Printing Technology in the Mechanical Manufacturing. Wanli Ma; Fenghe Tao; Changzhi Jia; Jianchun Yang // Applied Mechanics & Materials;2014, Issue 644-650, p4964 

    3D printing technology is one additive manufacturing technology which involves mechanical, electronics, optics, materials and other disciplines. The domestic and foreign research status are introduced. The applications in the mechanical aspect are especially analyzed. The problems in the...

  • 3D printed PLA-based scaffolds. Serra, Tiziano; Mateos-Timoneda, Miguel A.; Planell, Josep A.; Navarro, Melba // Organogenesis;Oct-Dec2013, Vol. 9 Issue 4, p239 

    Rapid prototyping (RP), also known as additive manufacturing (AM), has been well received and adopted in the biomedical field. The capacity of this family of techniques to fabricate customized 3D structures with complex geometries and excellent reproducibility has revolutionized implantology and...

  • AMAZING 3D PRINTING. Griggs, Bill // Robot;Jan/Feb2013, Issue 38, p56 

    The article focuses on 3D printing. Makerbot Industries founder Bre Pettis has been in the development of 3D printers for years before founding the company, which produced the Thing-O-Matic (second generation) 3D printer. Chuck Hull invented the process Stereolithography in 1984, which was the...

  • Additive Manufacturing (3D Printing): Past, Present and Future.  // Industrial Heating;May2014, Vol. 82 Issue 5, p39 

    The article provides an overview of the development of three-dimensional (3D) printing technology. The process of printing solid objects by progressive layering was first named stereolithography (SLA), patented and invented by Charles W. Hull in 1983. Industrial companies and universities...

  • Dimensional Accuracy of Product Design Based on Layout Orientation. Ummi Nazahah, R.; Che Mohamad, C. O.; Zainal Ariffin, S.; Hang Tuah, B. B. T. // Australian Journal of Basic & Applied Sciences;2014 Special, Vol. 8 Issue 4, p639 

    As a material-additive process, rapid prototyping (RP) has shown its capability in creating complex geometries that traditional material-removal processes cannot accomplish. One of the key factors in the determination of success of RP process is the selection of best possible layout orientation...

Share

Read the Article

Courtesy of VIRGINIA BEACH PUBLIC LIBRARY AND SYSTEM

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics