TITLE

Thermal Stress Analysis of Powder Metallurgy Sintering Process Based on ANSYS

AUTHOR(S)
Hui Qiu; Yonggang Zhu; Li Zhang
PUB. DATE
January 2016
SOURCE
Key Engineering Materials;2016, Vol. 667, p244
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Powder metallurgy is a technology process that the powder is pressed and sintered to get the metal and composite products. The sintering temperature is one of the main technology parameters of pressing sintering. In significant measure, the sintering temperature determines the organization and geometry size of the material, which directly affects the performance of the material. This paper takes magnesium powder metallurgy sintering material as the research object, studying the transient thermal analysis with the ANSYS finite element software, systematic researching the sinter temperature field and thermal stress field of sintered body in the sintering process, and observing in the corresponding distribution of stress field and deformation under different sintering temperature distribution graph. Temperature field and thermal stress field are the main factors affecting the quality of the sintered body in sintering process. Uneven temperature distribution will cause larger thermal stress. When the thermal stress exceeds a certain limit, the sample will be deformed. With the temperature increases, the sintering temperature difference increases, the stress distribution in the constantly changes. The stress and deformation is not entirely visible for sintered body, the deformation and cracking will be side by side in the sintering process. Therefore, theory of temperature field and thermal stress distribution are studied and discussed in certain sintering processing, the sintering process optimization can be designed to provide quantitative basis of the theoretical analysis.
ACCESSION #
110337504

 

Related Articles

  • DIRAN APELIAN, FAPMI.  // International Journal of Powder Metallurgy;May/Jun2005, Vol. 41 Issue 3, p13 

    Gives advice on problems related to powder metallurgy. Markets for powder metallurgy; Measurement used for open porosity of powder metallurgy materials.

  • Improving the physico-mechanical and service properties of powder products. Ryazantsev, Yu.; Kuimov, S.; Titova, A.; Sanochkin, A.; Bulanov, V. // Metallurgist;Sep2004, Vol. 48 Issue 9/10, p449 

    Examines equipment and techniques for improving the physico-mechanical and service properties of powder products. Factual background on the classical technology for making semi-finished and finished components with additions of molybdenum disulfide and graphite in various types of mixers;...

  • The Influence of Particle Sizes and Compaction Pressure on Surface Hardness of Aluminum Composite Fabricated Via Powder Metallurgy. Yusoff, Zamri; Jamaludin, Shamsul Baharin // Journal of Applied Sciences Research;Nov2011, Vol. 7 Issue 11, p133 

    A statistical analysis was used to anticipate the influence of particles sizes and compaction pressure on surface hardness of aluminum composites after compacted in a rigid die under an uniaxial compaction. Al-20 wt.% slag powder mixtures with various particle sizes (38¼m to 212¼m) were...

  • Ideas in Things, Things in Ideas. Hamburger, Michael // Nation;1/26/1980, Vol. 230 Issue 3, p86 

    Reviews the book 'An Explanation of America,' by Robert Pinsky.

  • P/M 2005--A 21ST CENTURY TECHNOLOGY. Johnson, Peter K. // International Journal of Powder Metallurgy;May/Jun2005, Vol. 41 Issue 3, p19 

    Forecasts on the growth of powder metallurgy technology in the U.S. for 2005. Introduction of the ANCORMAX-D powder metallurgy product from Hoeganaes Corp.; Materials and processing technologies for powder metallurgy parts makers developed by QMP; Trends in copper powder products; Sales of...

  • A METALLOGRAPHIC EXAMINATION INTO FATIGUE-CRACK INITIATION AND GROWTH IN FERROUS PM MATERIALS. Murphy, Thomas F.; Lindsley, Bruce A.; Schade, Christopher T. // International Journal of Powder Metallurgy;Fall2013, Vol. 49 Issue 4, p23 

    The article discusses a study which performed a metallographic examination of fatigue-crack initiation and growth in ferrous powder metallurgy (PM) materials. The metallographic examination reveals the pore structure, which provides a large amount of internal surface area, important in...

  • Unveiling Spark Plasma Sintering High-Throughput Processing. Aalund, Robert // Industrial Heating;Dec2009, Vol. 76 Issue 12, p41 

    The article offers information on the spark plasma sintering (SPS) technology and how it can be applied to commercial applications with economic benefits. It states that SPS is a high speed sintering technology that is capable of processing powder materials which are both conductive and non...

  • Evaluation of bone ingrowth into porous titanium implant: histomorphometric analysis in rabbits. Reis de Vasconcellos, Luana Marotta; Leite, Daniel Oliveira; de Oliveira, Fernanda Nascimento; Carvalho, Yasmin Rodarte; Cairo, Carlos Alberto Alves // Brazilian Oral Research;Oct-Dec2010, Vol. 24 Issue 4, p399 

    A porous material for bone ingrowth with adequate pore structure and appropriate mechanical properties has long been sought as the ideal bone-implant interface. This study aimed to assess in vivo the influence of three types of porous titanium implant on the new bone ingrowth. The implants were...

  • PROPERTY COMPARISON OF P/M BRONZE BEARINGS MANUFACTURED IN EUROPE AND NORTH AMERICA. Sanderow, Howard I.; Pease III, Leander F. // International Journal of Powder Metallurgy;May/Jun2005, Vol. 41 Issue 3, p37 

    Oil-impregnated, porous bronze bearings, the earliest and most ubiquitous modern powder metallurgy (P/M) product, are manufactured worldwide, Yet clear product differences exist from region to region. The recent global standard ISO 5755 for P/M materials includes two data tables describing the...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics